ES3 JAE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

COMPONENTS PRODUCT INFORMATION CONNECTOR NEW MB-0221-1 December 2010 JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. ES3 Series LED Power Supply Card Edge Type Connector RoHS Compliant The ES3 Series is a card edge connector for power supply of LED lighting devices that enables direct connection of the converter board and the LED mounting board. It is a 2-position card edge type connector ideal for LED bulb and LED lighting devices. The ES3 Series connectors are available in embossed tape, compatible with SMT mounting. The connector allows reflow solder mounting to the LED mounting board to occur at the same time other parts like LED and SMT components are mounted. Connector Cover Screws LEDs LED Mounting Board Connector Heat Sink (Aluminum Die-cast, or Similar) Converter Board Insulation Case (Base) Drawing of Inside of LED Bulb (For Reference)

2/5JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. Materials and Finishes

Ordering Information

Copper alloy / Sn platingContact-L Copper alloy / Sn platingContact-R White LCPInsulator Material / FinishComponent ES3 B 002 W F 1 R**** Series No. of Contacts Modification Code Reel Product (Note1) Connection Area Plating F: Sn plating

Features

„No. of Contacts: 2 pos. „Contact Resistance: 60mΩ max. (initial) „Dielectric Withstanding Voltage: AC 500Vr.m.s (per minute) „Durability: 20 mating cycles „Board Insertion Force: 30N max. „Rated Current: 1A „Rated Voltage: AC, DC 200V „Insulation Resistance: 10MΩ min. (after test) „Operating Temperature: -40 to+105 Deg. C „Low-profile 1.6mm mounting height, designed with consideration for light shielding. „Insulator is made of white LCP for heat and light resistance. „Direct connection of converter board and LED mounting board allows for reduced assembly work time. „Cable-less connection makes reduction in the number of parts possible. „SMT type, can be mounted at the same time as other components to the LED mounting board. General Specifications Connection B: Bottom Mount Type Connection to Board W: SMT straight type, without hold-down

3/5JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. Drawing Unit: mm SJ110395 ES3B002WF1 SJ Drawing Part Number

4/5JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. Applicable Dimensions of Board (Card Side, for Reference) Applicable Dimensions of Board (SMT Side, for Reference) Unit: mm

5/5JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. Notice: Products shown in this brochure are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. Ｂ Ｂ SJ110396 ES3B002WF1R1000 SJ Drawing Part Number Unit: mm