ES2F GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
SURFACE MOUNT FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 300 to 400 Volts Forward Current - 2.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mount applications ♦ Low profile package ♦ Built-in strain relief ♦ Ideal for automated placement ♦ Easy pick and place ♦ Glass passivated chip junction ♦ Superfast recovery times for high efficiency ♦ Low power loss, high efficiency ♦ High temperature soldering: 250°C/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AA molded plastic body over passivated chip Terminals:Solder plated solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Weight:0.003 ounces, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS ES2F ES2G UNITS Device marking code EF EG Maximum repetitive peak reverse voltage V RRM 300 400 Volts Working peak reverse voltage V RWM 225 300 Volts Maximum RMS voltage V RMS 210 280 Volts Maximum DC blocking voltage V DC 300 400 Volts Maximum average forward rectified current at TL=110°C I(AV) 2.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on I FSM 50 Amps rated load (JEDEC Method) at TL=110°C Maximum instantaneous forward voltage at 2.0A V F 1.10 Volts Maximum DC reverse current T A=25°C 10 at working peak reverse voltage TA=100°C IR 200 µA Maximum reverse recovery time (NOTE 1) trr 35 ns Maximum reverse recovery time (NOTE 2) trr 50 ns Maximum reverse recovery current (NOTE 2) IRM 3.0 Amps Maximum stored charge (NOTE 2) Q rr 50 nC Typical junction capacitance (NOTE 3) C J 15 pF Typical thermal resistance (NOTE 4) R Θ JA 75 R Θ JL 25 °C/W Operating junction and storage temperature range T J, TSTG -55 to +150 °C NOTES : (1) Reverse recovery test conditions: IF=0.5A, IR = I.0A, lrr=0.25A (2) Measured at IF=1.0A, di/dt=100A/µs, VR =30V, Irr=0.1IRM (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts NOTICE: Advanced product information is subject to change without notice 0.160 (4.06) 0.180 (4.57) 0.006 (0.152) 0.012 (0.305) 0.030 (0.76) 0.205 (5.21) 0.220 (5.59) 0.084 (2.13) 0.096 (2.44) 0.077 (1.95) 0.086 (2.20) 0.130 (3.30) 0.155 (3.94) MAX. DO-214AA Dimensions in inches and (millimeters) NEW PRODUCT NEW PRODUCT NEW PRODUCT
0.1 1 10 100 1,000 100 0.01 0.1 100 20 40 60 80 100 0.1 100 1,000 1 10 100 80 90 100 110 120 130 140 150 1.0 2.0 3.0 50 100 150 120 160 200 17512525 75 RATING AND CHARACTERISTIC CURVES ES2F AND ES2G FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) at T L=110°C RESISTIVE OR INDUCTIVE LOAD FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE trr Q RR FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS FORWARD CURRENT, AMPERES REVERSE VOLTAGE, VOLTSJUNCTION TEMPERATURE, °C TJ=125°C f=1.0 MHz Vsig=50MVp-p INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEGFIG. 5 - REVERSE SWITCHING CHARACTERISTICS PER LEG CAPACITANCE, pF @2A, 20A/µs @5A, 50A/µs @5A, 50A/µs @1A, 100A/µs @1A, 100A/µs @2A, 20A/µs STORED CHARGE/REVERSE RECOVERY TIME, nC/ns TJ=125°C TJ=125°C TJ=100°C TJ=100°C TJ=25°C TJ=25°C