ES2A GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
SURFACE MOUNT FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 50 to 200 Volts Forward Current - 2.0 Amperes
FEATURES
¨ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¨ For surface mount applications ¨ Low profile package ¨ Built-in strain relief ¨ Ideal for automated placement ¨ Easy pick and place ¨ Glass passivated chip junction ¨ Superfast recovery times for high efficiency ¨ Low power loss, high efficiency ¨ High temperature soldering: 250¡C/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AA molded plastic body over passivated chip Terminals: Solder plated solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounces, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25¡C ambient temperature unless otherwise specified. SYMBOLS ES2A ES2B ES2C ES2D UNITS Device marking code EA EB EC ED Maximum repetitive peak reverse voltage V RRM 50 100 150 200 Volts Maximum RMS voltage V RMS 35 70 105 140 Volts Maximum DC blocking voltage V DC 50 100 150 200 Volts Maximum average forward rectified current at TL=110¡C I(AV) 2.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on I FSM 50.0 Amps rated load (JEDEC Method) at TL=110¡C Maximum instantaneous forward voltage at 2.0A V F 0.90 Volts Maximum DC reverse current T A=25¡C 10.0 at rated DC blocking voltage T A=100¡C IR 350 mA Maximum reverse recovery time (NOTE 1) trr 20.0 ns Maximum reverse recovery time T J=25¡C 30.0 (NOTE 2) TJ=100¡C trr 50.0 ns Maximum stored charge T J=25¡C 10.0 (NOTE 2) TJ=100¡C Qrr 25.0 nC Typical junction capacitance (NOTE 3) CJ 18.0 pF Maximum thermal resistance (NOTE 4) RQJA 75.0 RQJL 20.0 ¡C/W Operating junction and storage temperature range T J, TSTG -55 to +150 ¡C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR= I.0A, lrr=0.25A (2) Trr and Qrr measured at: IF=2.0A, VR=30V, di/dt=50A/ms, Irr=10% IR (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts 2/10/99 0.160 (4.06) 0.180 (4.57) 0.006 (0.152) 0.012 (0.305) 0.030 (0.76) 0.205 (5.21) 0.220 (5.59) 0.084 (2.13) 0.096 (2.44) 0.077 (1.95) 0.086 (2.20) 0.130 (3.30) 0.155 (3.94) MAX. DO-214AA Dimensions in inches and (millimeters)
80 90 100 110 120 130 140 150 0.01 0.1 0.1 1 10 100 2.0 4.0 6.0 8.0 1 10 100 5.0 0.1 1 10 100 100 0 20 40 60 80 100 0.01 0.1 100 1,000 FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE, ¡C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 HZ PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, %FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) at TL=110¡C TJ=125¡C TJ=85¡C TJ=25¡C TJ=25¡C PULSE WIDTH=300ms 1% DUTY CYCLE TJ=25¡C f=1.0 MHZ Vsig=50mVp-p RESISTIVE OR INDUCTIVE LOAD x 5.0mm) COPPER PAD AREAS RATING AND CHARACTERISTIC CURVES ES2A THRU ES2D