ES1A LEIDITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Ideal for automated placement Glass passivated chip junctions Low forward voltage drop Low leakage current High forward surge capability High temperature soldering： 260℃/10 seconds at terminals SOD-123FL Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date Major Ratings and Characteristics Case: SOD-123FL molded plastic body over glass passivated chip Terminals: Solder plated, solderable per JESD22-B102 Polarit y : Laser band denotes cathode end I R 5 μA V F 0.95V, 1.25V, 1.70 V I F(AV) 1.0A V RRM
50 V to 600 V
I FSM 25A y Weight: 0.017gram Maximum Ratings & Thermal Characteristics A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Note 2: Pulse test:300μs pulse width,1% duty cycle. Instantaneous forward voltage Reverse current Reverse recovery time Items Test conditions I F =1.0A (2) V R DC T j =25℃ T j =125℃ I F = 0.5 A , I R = 1.0 A , I rr = 0.25 A –55 to +150 35.0t rr nS V I R μA V F 0.95 1.25 1.70 V50 100 150 200 Symbol UNIT A 1.0 150 300 400 280 600 V420 T T STG 600 R θJA ℃/W A I FSM 35 70 105 140 210 UNIT V RRM 50 100 150 200 ES ES ES 300 ES ES ES 400 ES V T j max. 150 °C Thermal resistance from junction to ambient (1) Operating junction and storage temperature range SymbolItems Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load V DC I F(AV) V RMS ES1A~ES1J Surface Mount Superfast Rectifiers ES1A~1D ES1E~1G ES1J Rev : www.leiditech.com 01.06.2018 1/3
A =25 ℃ unless otherwise noted) ES1A~ES1J Rev : www.leiditech.com 01.06.2018 2/3
Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 125°C. ES1A~ES1J Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059 Rev : www.leiditech.com 01.06.2018 3/3