ERC12UG PANASONIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. E R C U G K 11 12 Discharge Path Resistors Product Code 12 0.5 W TypeCode Resistance Value Power Rating at 70°Ca m b . Special Feature Resistance Tolerance Suffix for Packaging and / or Cut & Formed Leads Maximum Ambient Temperature at Full LoadApproved Safety Standard Code G7 0 °C Temp. K ± 10 % The first two digits are significant figures of resistance and the third one denotes number of zeros following. Standard bulk packingNil C type Cut & FormedC D type Cut & FormedD V Taped & Box Approved Safety Standard (Green) 0.70 Tolerance 1st significant figure 2nd significant figure Multiplier +0.05 –0.01 Part. No. Power Rating at 70 °C (W) Limiting Element Voltage (Maximum RCWV) (1) (V) Maximum Overload Voltage (V) Dielectric Withstanding Voltage (V) Standard Resistance Value Resistance Tolerance (%) Resistance Range (/L50529) Mass (Weight) [mg/pc.]min. max. ERC12UG 0.5 350 700 700 E12 ±10 1 M 10 M 420 Discharge Path Resistors Type:ERC12UG ■ Features

  • Composed of high pure phenol resin and the akin material combined for element
  • Absorption of electric shock (Pulse, Surge voltage)
  • Solid body, suitable for automatic insertion
  • High reliability
  • Reference Standards IEC 60065, EN 60065, BS 415, J 60065 ■ Dimensions in mm (not to scale) ■ Rating ■ Recommended Applications
  • Provides a conductive path between the pow er sup ply circuit and an external antenna or ca ble system in put. ■ Conforming to
  • UL 1676: E138124
  • CSA C22.2 No.1-98: CA108419 ■ Explanation of Part Number (1) Rate d Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=/L50496Power Rating /L1154 Re sis tance Value, or Limiting El e ment Voltage (maximum RCWV) listed abov e, whichever less. Feb. 2006

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Discharge Path Resistors –40 –20 0 20 40 60 80 100 120 140 1600 180–60 125 °C 70 °C–55 °C Ambient Temperature (°C) 100Rated Load (%) 6.0±1.0 3.2 min. 1.2 max. 1 max. 52±1 5.0±0.5 1 max. 66 max. lL1–L2l <1.0 17.0±0.7 15.0±0.7 5.0±0.5 Type D Type C 15.0±0.5 4.5– 0.5 +1.5 1.5 max. 13.5±0.5 Marking 260 BOX Power Derati ng Curve For resistors operated in ambient temperatures above 70 °C, powe r rating shall be de rated in accordance with the fi gure on the right. (Standard quantity 1000 pcs./box) Safety Precautions The following ar e precautions for individual products. Please also refer to the precautions common to Fixed Resistors shown on page ER3 of this catalog. 1. Do not stor e Discharge Path Resistors (hereafter called the resistors) in a hot and/or humid place. Otherwise, they will absorb moisture, and the resistance values will chan ge over time. For long-term storage, keep the tem per a ture and humidity low (25 °C and 45 % RH max.) 2. Do not perfor m extended soldering at a high temperature. Otherwise, the soldering heat may de te ri o rate the per for mance or substantially change the resistances. Follow the soldering conditions shown below: (1) Soldering position /L52510 3 mm or more away from the root of the resistors' bodies. (2) Soldering temperature and time Soldering with an iron Iron tip temperature /L52510 350 °C max., within 3 sec. Flow soldering Solder temperature /L52510 250 °C max., within 5 sec. 3. If a transien t load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the resistors when installed in your products under the most adverse con di tions before use. ■ Taped & Box Dimensions (mm)■ Cut & Formed Dimensions (mm) ■ Required Characteristics UL, CSA Characteristics Specifi cations Test Methods Resistance Tests After Each Step Resistance Change with in ±50 % from nominal value and fi nal value must be less than 12 M /L50529 <Step 1> Expose for 21 days in a Humidity Test Chamber (40 °C, 95 % RH) <Step 2> Apply 10 times discharges DC 10 kV 10000 pF <Step 3> Apply AC 1000 V for 1 minute Over Voltage Test Resistance Change with in ±10 % Apply High Voltage AC 1500 V 4 seconds Feb. 2006

– ER3 – Safety Precautions (Common precautions for Fixed Resistors)  When using ou r products, no matter what s ort o f e q u i p m e n t t h e y m i g h t b e u s e d f or , b e s u r e t o m a k e a w r i tt e n agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject to change without prior notice.  Do not use the products beyond the specifi cations described in this catalog.  This cata log explains the quality and performance of the products as individual components. Be fore use, check and evaluate their operations when installed in your products.  Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment where a defect in these products may cause th e loss of human life or other signifi cant damage, such as damage to vehicles (au to mo bile, train, vessel), traffi c lights, medical equipment, aerospace equipment, elec tric heating ap pli anc es, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault (1) Precautions for use  These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipm ent, home el ectric ap pli anc es, offi ce equipment, information and com mu ni ca tion equipment)  These products are not intended for use in the following special conditions. Be fore u sing the products, care ful ly check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent 2. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl 2, H2S, NH3, SO2, or NO2 4. Electric Static Discharge (ESD) Environment These components are sensitive to static electricity and can be damaged under static shock (ESD). Please take measures to avoid any of these environments. Smaller components are more sensitive to ESD environment. 5. Electromagnetic Environment Avoid any environment where strong electromagnetic waves exist. 6. In an environment where these pr oducts cause dew condensation 7. Sealing or co ating of these products or a printed circuit board on which thes e products are mounted, with resin or other materials  These products generate Joule heat when energized. Carefu lly position th ese products so that their heat will not affect the other components.  Carefully position thes e products so that their temperatures will not exceed the category temperature range due to the effect s of neighboring heat-generating com po nents. Do not mount or place heat-generating com po nents or infl ammables, such as vinyl-coated wires, near these products .  Note that non- cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may dete riorate the performance or reliability of the products.  Carefully select a fl ux cleaning agent fo r use after soldering. An unsuit able agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water res i dues. Otherwise, the insulation performance may be deteriorated. (2) Precaution s for storage The performance of these products, including the solderability, is guaran teed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 ° C and a relative humidity of 45 % to 85 %. Even wi thin the above guarantee periods, do not store these products in the fol low ing conditions. Otherwise, their elec tri cal performance and/or solderability may be dete riorated, and the packaging materials (e.g. tap ing ma te ri als) may be de formed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl 2, H2S, NH3, SO2, or NO2 2. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Feb. 2006