EPT-05SC48-A

EPT-05SC48-A ETA-USA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

EPB-05SC48-A 36-75 5 10 50 EPT-05SC48-A 36-75 5 6 30 EPD-05SC48-A EPC-05SC48-A 36-75 5 15 EPE-05SC48-A * 36-75 5 20 100 150 200 Model Name Vin (Vdc) Vout(Vdc) Io(Amps) Watts EPO-05SC48-A 36-75 5 30 36-75 5 40 Exceeding absolute maximum ratings may cause permanent damage and reduce reliability ABSOLUTE MAXIMUM RATINGS: CONDITIONS Continuous 100 msec max. UNITS Vdc Vdc Vdc o C o C MAX 100 1500 100 110 MIN -40 -40 PARAMETER Input Voltage Transient Input Voltage Input/Output Isolation Operating Case Temperature Storage Temperature SPECIFICATION MODEL SELECTION

FEATURES

High Power Density - Up to 82W/in3 Constant Frequency - 370kHz -40 to +100oC Operation 105oC Over Temperature High Efficiency Low Output Noise Industry-Standard Pinout Metal Baseplate 2:1 Input Voltage Range Thermal Protection(100W and up only) Over Voltage Protection Current Limit/Short Circuit Protection Adjustable Output Voltage: 60% to 110% of V 0,set Remote Sense Logic ON/OFF Safety Agency Approval DC-DC Converters, EP SERIES 36~75Vdc Input 30, 50, 75,100,150, 200 WATT PARAMETER Operation Input Voltage (Vi ) Maximum Input Current (Ii,max): EPT-05SC48-A EPB-05SC48-A E PC-05SC48-A EPD-05SC48-A EPE-05SC48-A EPO-05SC48-A Inrush Transient Input Reflected-Ropple Current: Peak to Peak Input Ripple Rejection CONDITIONS V i = 0Vdc to 75Vdc Io = Io,max 5Hz~20MHz, 12uH Source Inpedance @ 120Hz MIN TYP MAX 1.6 2.5 3.5 4.0 6.5 8.5 1.0 UNITS V A A A A A A A 2 t mAp-p dB INPUT SPECIFICATIONS: ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com Long Lead(0.23in)-LL Negative Logic Control-Neg. (Remote Control For C-T) Threaded hole standoff-Td Positive Logic Control-Pos. (Remote Control For C-T) Trim DIP SPECIAL FEATURES *SPECIAL FEATURES Size: 60.70mm x 57.91mm x 13.30mm

Output Voltage Set Point (Vo,set) Line Regulation Load Regulation Temperature Drift Total Regulation Output Ripple and Noise Voltage: R M S Peak to Peak External Load Capacitance Output Current( I o ): EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A Output Current limit:: EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A CONDITIONS Tc=25oC, Vi=48V, Io= Io,max Vi=36V to 75V Io=0.5A to Io,max Tc=-40oC to 100oC 5Hz to 20MHz Electrolytic capacitor At Io< Io,min,the modules may exceed output ripple specifications V o=90% of Vo,set Vo=250mV Tc=70oC Vi=48V Io=Io,max 25%-50%-75% load 0.1A/ s Tc=25 oC Vi=48V MIN 4.92 0.5 0.5 0.5 0.5 0.5 0.5 0.5 TYP 5.00 0.01 0.05 7.5 12.0 14.4 18.0 23.0 34.5 44.0 370 MAX 5.08 0.1 0.2 1.3 150 330 8.5 14.0 16.8 21.0 26.0 39.0 52.0 170 300 UNITS V mV mVrms mV p-p uF A A A A A A A A A A A A A A Io,max kHz o,set s DC-DC Converters, EP SERIES 36~75Vdc Input 30, 50, 75,100,150, 200 WATT OUTPUT SPECIFICATIONS: PARAMETER Logic On/Off: Logic Low: Ion/off Von/off Logic High:Ion/off Von/of Turn-On Time Output Remote Sense Range Output Voltage Trim Range Over Voltage Protection Over Temperature Protection CONDITIONS Von/off=0V Ion/off<1mA Von/off=15V Ion/off=0.0 A Io= 80% of Io,max Vo with +/- 1% Vo,set Auto recovery Auto recovery (100W, 150W and 200W only) MIN 5.9 TYP 105 MAX 1.2 0.5 110 7.0 UNITS mA V A V ms V %Vo,set V oC CONTROL SPECIFICATIONS: Output Short Circuit Current Switching Frequency Efficiency: EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A EPT-05SC48-A Dynamic Response: Peak Deviation Settling Time ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com

DIA. 1.00 (0.04) PIN (7X) 19.20(0.75) DIA. 2.03 (0.08) PIN (2X) 4.83(0.19) 48.26 (1.90) 57.91 (2.28) 60.70 (2.39)15.24 (0.60) 12.57 (0.50) INNER H O LE M 3 X 0.5 THRU (4X) 50.80 (2.00) 4.95(0.20) 10.16 (0.40)(4X) 7.62 (0.30)(2X) O N /OFF +IN -IN CAS E +OUT T -OUT 11.51 (0.45) PARAMETER MTBF Weight Size MIN MAX UNITS Mhrs g in CONDITIONS Tc=40oC,Io =80% of Io,max TYP 1.4 118 2.39x2.28x0.52 GENERAL SPECIFICATIONS: Load +Out +Sense Trim -Sense -Out +Outo +Sense Trim -Sense -Out Rtrim-down Trim-Down Trim-Up Rtrim-up Load Rtrim-down= ((100/ %)-2) Kohms Rtrim-up= ( ) Kohms 1.225 % % % = Desired Output Voltage Change Vo = Output Voltage Rtrim-up= External Resistor Value to Increase Vo Rtrim-down= External Resistor Value to Decrease Vo DC-DC Converters, EP SERIES 36~75Vdc Input 30, 50, 75,100,150, 200 WATT ISOLATION SPECIFICATIONS: ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com