EGP30A GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
GLASS PASSIVATED FAST EFFICIENT RECTIFIER Forward Voltage -50 to 400 Volts Reverse Current -3.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Glass passivated cavity-free junction ♦ Superfast recovery time for high efficiency ♦ Low forward voltage, high current capability ♦ Low leakage current ♦ High surge current capability ♦ High temperature metallurgically bonded construction ♦ High temperature soldering guaranteed: 300°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: Molded plastic over solid glass body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.03 ounce, 0.8 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. EGP EGP EGP EGP EGP EGP SYMBOLS 30A 30B 30C 30D 30F 30G UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 300 400 Volts Maximum RMS voltage V RMS 35 70 105 140 210 280 Volts Maximum DC blocking voltage V DC 50 100 150 200 300 400 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load I FSM 125.0 Amps Maximum instantaneous forward voltage at 3.0A V F 0.95 1.25 Volts Maximum DC reverse current T A=25°C 5.0 at rated DC blocking voltage T A=125°C I R 100.0 µA Typical reverse recovery time (NOTE 1) trr 50.0 ns Typical junction capacitance(NOTE 2) C J 95.0 75.0 pF Typical thermal resistance (NOTE 3) R Θ JA 20.0 R Θ JL 8.0 °C/W Operating junction and storage temperature range T J, TSTG -65 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts 0.210 (5.3) 0.190 (4.8) DIA. 0.042 (1.07) 0.037 (0.94) DIA. 1.0 (25.4) MIN. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. Case Style GP20 Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No.3,996,602 and brazed-lead assembly by Patent No. 3,930,306 PATENTED*
1.0 2.0 3.0 1 10 100 100 125 150 175 0.1 1 10 100 1,000 120 150 180 210 0.01 0.1 0.2 0.01 0.1 1 10 100 0.1 100 0 20 40 60 80 100 120 0.001 0.01 0.1 100 RATINGS AND CHARACTERISTIC CURVES EGP30A THRU EGP30G FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE JUNCTION CAPACITANCE, pF TRANSIENT THERMAL IMPEDANCE, °CW REVERSE VOLTAGE, VOLTS t, PULSE DURATION, sec. TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=150°C TJ=125°C TJ=75°C TJ=25°C TJ=25°C TJ=25°C f=1.0 MHZ Vsig=50mVp-p RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH TJ=25°C TJ=150°C EGP30A - EGP30D EGP30F & EGP30G PULSE WIDTH=300 µs 1% DUTY CYCLE EGP30A - EGP30D EGP30F & EGP30G