EGP10A GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
GLASS PASSIVATED FAST EFFICIENT RECTIFIER Reverse Voltage - 50 to 400 Volts Forward Current -1.0 Ampere
FEATURES
♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Glass passivated cavity-free junction ♦ Superfast recovery time for high efficiency ♦ Low forward voltage, high current capability ♦ Low leakage current ♦ High surge current capability ♦ High temperature metallurgically bonded construction ♦ High temperature soldering guaranteed: 300°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AL molded plastic over glass body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. EGP EGP EGP EGP EGP EGP SYMBOLS 10A 10B 10C 10D 10F 10G UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 300 400 Volts Maximum RMS voltage V RMS 35 70 105 140 210 280 Volts Maximum DC blocking voltage V DC 50 100 150 200 300 400 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load I FSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A V F 0.95 1.25 Volts Maximum DC reverse current T A=25°C 5.0 at rated DC blocking voltage T A=125°C IR 100 µA Maximum reverse recovery time (NOTE 1) trr 50.0 ns Typical junction capacitance (NOTE 2) C J 22.0 15.0 pF Typical thermal resistance(NOTE 3)R Θ JA 50.0 °C/W Operating junction and storage temperature range T J, TSTG -65 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts Dimensions in inches and (millimeters) *Glass Encapsulation technique is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-204AL 0.107 (2.7) 0.080 (2.0) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 1.0 (25.4) MIN. 0.205 (5.2) 0.160 (4.1) DIA. PATENTED*
0.5 1.0 25 50 75 125 150 1 10 5.0 100 0.01 0.1 0.01 0.1 1 10 100 0.1 100 0.1 1 10 100 20 80 0.1 100 0 40 60 100 1,000 RATINGS AND CHARACTERISTICS CURVES EGP10A THRU EGP10G FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 0.375” (9.5mm) LEAD LENGTH FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, % TJ=25°C TJ=150°C PULSE WIDTH=300 µs 1% DUTY CYCLE FIG. 3 -TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS FORWARD FORWARD CURRENT, AMPERES TJ=TJ max. 8.3ms SINGLE HALF SINE WAVE (JEDEC Method) FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE t, PULSE DURATION, sec. TRANSIENT THERMAL IMPEDANCE, °CW TJ=25°C f=1.0 MHZ Vsig=50mVp-p TJ=150°C TJ=100°C TJ=25°C EGP10A - EGP10D EGP10F & EGP10G NUMBER OF CYCLES AT 60 H Z FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS EGP10A - EGP10D EGP10F & EGP10G