EEVTG1C331Q | DigiCamel IC Datasheet

Online Datasheet

Read EEVTG1C331Q online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 3

Technical content

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ TG – EEE-50 – A±0.2 W () Reference size L φD±0.5 H B±0.2 (I) K (P) (I) 0.3 max. Pressure Relief (φ10 and larger) 100 TGA Capacitance (µF) Rated Voltage Mark Series identification Mark for Lead-Free Products Black Dot (Square) Lot number Negative polarity marking (–) 1000 TGA Capacitance (µF) Rated Voltage Mark Series identification Lot number Negative polarity marking (–) ■ Features

Endurance:125 °C 1000 h to 2000 h
Miniaturization (40 % less than TA Series)
Low ESR (Low temp)
Vibration-proof product is available upon request. (φ8 mm and larger)
RoHS directive compliant (Parts No φ8 to φ10 : EEE✽, φ12.5 to φ18 : EEV✽) Surface Mount Type Series: TG Type: V ■ Speciﬁ cations Category Temp. Range – 40 °C to +125 °C Rated W.V. Range 10 V.DC to 100 V.DC Nominal Cap. Range 10 µF to 4700 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Cur rent I < 0.01 CV After 2 minutes tan δ Please see the attached standard products list Characteristics at Low Temperature W.V. (V) 10 16 25 35 50 63 80 100 (Impedance ratio at 120 Hz)Z(–25 °C )/Z(+20 °C ) 32222222 Endurance After applying rated working voltage for 1000 hours (φ8/L11546.2), 2000 hours (φ8/L115410.2<) at +125 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±30 % of initial measured value (code U : ±35 %) tan δ < 300 % of initial speciﬁ ed value (code U : ±350 %) DC leakage current < initial speciﬁ ed value Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance (With voltage treatment) Resistance to Soldering Heat After reﬂ ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan δ < initial speciﬁ ed value DC leakage current < initial speciﬁ ed value ■ Di men sions in mm (not to scale) ■ Marking Example : 10 V 100 µF, 10 V 1000 µF Marking colo c : BLACK Lead-Free pr oducts (< φ10) Lead-Free pr oducts ( > φ12.5) Size code DL A, B H I W P K + 0.15 Frequency (Hz) 120 1 k 1 0 k 100 k to Correction factor 0.65 0.85 0.95 1.00 ■ Frequency correction factor for ripple current (Unit : mm) A 10 V C 16 V E 25 V V 35 V Rated Voltage Mark H 50 V J 63 V K 80 V 2A 100 V 00 Nov. 2012

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ TG – EEE-51 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Speciﬁ cation Part No. (RoHS:compliant) Reﬂ ow Min. Packaging Q'ty Dia. Length ✽Size Code Ripple Current (100 kHz) (+125 °C) ESR (100 kHz) (+20 °C) tan δ (120 Hz) (+20 °C) Taping (V) (µF) ( mm) (mm) (mA r.m.s.) (/L50529)( p c s ) 100 8 6.2 E 100 1.00 0.30 EEETG1A101P (2) 1 000 220 86 . 2 ( E ) 1 0 0 1 . 0 0 0 . 3 0 EEETG1A221UP (2) 1 000 81 0 . 2F 1 9 7 0 . 5 0 0 . 3 0 EEETG1A221P (2) 500 330 81 0 . 2 ( F )1 9 7 0 . 5 0 0 . 3 0 EEETG1A331UP (2) 500 10 10.2 G 270 0.30 0.30 EEETG1A331P (2) 500 470 10 10.2 (G) 270 0.3 00 . 3 0 EEETG1A471UP (2) 500 1000 12.5 13.5 H13 800 0. 12 0.30 EEVTG1A102Q (3) 200 1500 12.5 13.5 (H13) 800 0.12 0.30 EEVTG1A152UQ (3) 200 2200 16 16.5 J16 110 0 0.08 0.32 EEVTG1A222M (3) 125 3300 16 16.5 (J16) 1100 0.08 0.34 EEVTG1A332UM (3) 125 18 16.5 K16 130 0 0.075 0.34 EEVTG1A332M (3) 125 4700 18 16.5 K16 1 300 0.075 0.36 EEVTG1A472M (3) 125 100 8 10.2 F 197 0.50 0.23 EEETG1C101P (2) 500 220 81 0 . 2 ( F )1 9 7 0 . 5 0 0 . 2 3 EEETG1C221UP (2) 500 10 10.2 G 270 0.30 0.23 EEETG1C221P (2) 500 330 10 10.2 (G) 270 0.30 0.23 EEETG1C331UP (2) 500 12.5 13.5 H13 800 0.12 0.23 EEVTG1C331Q (3) 200 470 12.5 13.5 H13 800 0.12 0.23 EEVTG1C471Q (3) 200 680 12.5 13.5 H13 800 0.12 0.23 EEVTG1C681Q (3) 200 1000 12.5 13.5 (H13) 800 0.12 0.23 EEVTG1C102UQ (3) 200 16 16.5 J16 1100 0.08 0.23 EEVTG1C102M (3) 125 2200 16 16.5 (J16) 1100 0.08 0.25 EEVTG1C222UM (3) 125 18 16.5 K16 130 0 0.075 0.25 EEVTG1C222M (3) 125 3300 18 16.5 K16 1 300 0.075 0.27 EEVTG1C332M (3) 125 47 8 6.2 E 100 1.00 0.18 EEETG1E470P (2) 1 000 100 86 . 2 ( E ) 1 0 0 1 . 0 0 0 . 1 8 EEETG1E101UP (2) 1 000 81 0 . 2F 1 9 7 0 . 5 0 0 . 1 8 EEETG1E101P (2) 500 220 81 0 . 2 ( F )1 9 7 0 . 5 0 0 . 1 8 EEETG1E221UP (2) 500 10 10.2 G 270 0.30 0.18 EEETG1E221P (2) 500 330 10 10.2 (G) 270 0.30 0.18 EEETG1E331UP (2) 500 12.5 13.5 H13 800 0.12 0.18 EEVTG1E331Q (3) 200 470 12.5 13.5 H13 800 0.1 20 . 1 8 EEVTG1E471Q (3) 200 680 12.5 13.5 (H13) 800 0.12 0.18 EEVTG1E681UQ (3) 200 16 16.5 J16 1100 0.08 0.18 EEVTG1E681M (3) 125 1000 16 16.5 (J16) 1100 0.08 0.18 EEVTG1E102UM (3) 125 18 16.5 K16 130 0 0.075 0.18 EEVTG1E102M (3) 125 2200 18 16.5 K16 1 300 0.075 0.20 EEVTG1E222M (3) 125 33 8 6.2 E 100 1.00 0.16 EEETG1V330P (2) 1 000 47 86 . 2 ( E ) 1 0 0 1 . 0 0 0 . 1 6 EEETG1V470UP (2) 1 000 81 0 . 2F 1 9 7 0 . 5 0 0 . 1 6 EEETG1V470P (2) 500 100 81 0 . 2 ( F )1 9 7 0 . 5 0 0 . 1 6 EEETG1V101UP (2) 500 10 10.2 G 270 0.30 0.16 EEETG1V101P (2) 500 220 10 10.2 (G) 270 0.30 0.16 EEETG1V221UP (2) 500 330 12.5 13.5 H13 800 0.12 0.16 EEVTG1V331Q (3) 200 470 12.5 13.5 (H13) 800 0.12 0.16 EEVTG1V471UQ (3) 200 16 16.5 J16 1100 0.08 0.16 EEVTG1V471M (3) 125 680 16 16.5 (J16) 1100 0.08 0.16 EEVTG1V681UM (3) 125 18 16.5 K16 130 0 0.075 0.16 EEVTG1V681M (3) 125 1000 18 16.5 K16 1300 0.075 0.16 EEVTG1V102M (3) 125 ✽Size code( ):Miniaturization product

Please refer to the page of “Reﬂ ow Proﬁ le” and “The Taping Dimensions”.
When requesting vibration-proof product, please put the last “V” instead to “P, Q, or M” Endurance : 125 °C 1000 h ( φ8/L115410.2 < : 2000 h) 00 Nov. 2012

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ TG – EEE-52 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Speciﬁ cation Part No. (RoHS:compliant) Reﬂ ow Min. Packaging Q'ty Dia. Length ✽Size Code Ripple Current (100 kHz) (+125 °C) ESR (100 kHz) (+20 °C) tan δ (120 Hz) (+20 °C) Taping (V) (µF) ( mm) (mm) (mA r.m.s.) (/L50529)( p c s ) 10 8 6.2 E 80 1.60 0.14 EEETG1H100P (2) 1 000 22 8 6.2 E 80 1.60 0.14 EEETG1H220P (2) 1 000 33 86 . 2 ( E ) 8 0 1 . 6 0 0 . 1 4 EEETG1H330UP (2) 1 000 81 0 . 2F 1 3 3 0 . 7 5 0 . 1 4 EEETG1H330P (2) 500 47 81 0 . 2 ( F ) 1 3 3 0 . 7 5 0 . 1 4 EEETG1H470UP (2) 500 10 10.2 G 221 0.50 0.14 EEETG1H470P (2) 500 100 10 10.2 (G) 221 0.50 0.14 EEETG1H101UP (2) 500 220 12.5 13.5 H13 600 0.23 0.14 EEVTG1H221Q (3) 200 330 12.5 13.5 H13 600 0.23 0.14 EEVTG1H331Q (3) 200 470 16 16.5 J16 900 0. 1 50 . 1 4 EEVTG1H471M (3) 125 680 16 16.5 (J16) 900 0.15 0.14 EEVTG1H681UM (3) 125 18 16.5 K16 9 50 0.14 0.14 EEVTG1H681M (3) 125 1000 18 16.5 K16 9 50 0.14 0.14 EEVTG1H102M (3) 125 10 8 6.2 E 55 2 .20 0.12 EEETG1J100P (2) 1 000 22 8 10. 2F1 0 0 1 . 0 0 0 . 1 2 EEETG1J220P (2) 500 33 81 0 . 2 ( F ) 1 0 01 . 0 00 . 1 2 EEETG1J330UP (2) 500 10 10.2 G 150 0.80 0.12 EEETG1J330P (2) 500 47 81 0 . 2 ( F ) 1 0 01 . 0 00 . 1 2 EEETG1J470UP (2) 500 10 10.2 G 150 0.80 0.12 EEETG1J470P (2) 500 100 10 10.2 (G) 150 0.80 0.12 EEETG1J101UP (2) 500 12.5 13.5 H13 3 50 0.26 0.12 EEVTG1J101Q (3) 200 220 12.5 13.5 H13 350 0.26 0.12 EEVTG1J221Q (3) 200 330 16 16.5 J16 500 0.1 80 . 1 2 EEVTG1J331M (3) 125 470 16 16.5 J16 500 0.1 80 . 1 2 EEVTG1J471M (3) 125 10 8 10. 2F 7 0 1 . 3 0 0 . 1 2 EEETG1K100P (2) 500 22 81 0 . 2 ( F )7 0 1.30 0.12 EEETG1K220UP (2) 500 10 10.2 G 90 1.00 0.12 EEETG1K220P (2) 500 33 81 0 . 2 ( F )7 0 1.30 0.12 EEETG1K330UP (2) 500 10 10.2 G 90 1.00 0.12 EEETG1K330P (2) 500 47 10 10.2 (G) 90 1.00 0.12 EEETG1K470UP (2) 500 12.5 13.5 H13 2 50 0.42 0.12 EEVTG1K470Q (3) 200 100 12.5 13.5 (H13) 250 0.42 0.12 EEVTG1K101UQ (3) 200 16 16.5 J16 350 0.30 0.12 EEVTG1K101M (3) 125 220 16 16.5 (J16) 350 0.30 0.12 EEVTG1K221UM (3) 125 18 16.5 K16 4 00 0.28 0.12 EEVTG1K221M (3) 125 330 16 16.5 (J16) 350 0.30 0.12 EEVTG1K331UM (3) 125 18 16.5 K16 4 00 0.28 0.12 EEVTG1K331M (3) 125 470 18 16.5 K16 400 0.28 0.12 EEVTG1K471M (3) 125 100 10 8 10. 2F 7 0 1 . 3 0 0 . 1 0 EEETG2A100P (2) 500 22 81 0 . 2 ( F )7 0 1.30 0.10 EEETG2A220UP (2) 500 10 10.2 G 90 1.00 0.10 EEETG2A220P (2) 500 33 10 10.2 G 90 1.00 0.10 EEETG2A330P (2) 500 47 12.5 13.5 H1 32 5 00 . 42 0.10 EEVTG2A470Q (3) 200 100 16 16.5 J16 350 0.30 0.10 EEVTG2A101M (3) 125 220 18 16.5 K16 400 0.28 0.10 EEVTG2A221M (3) 125 330 18 16.5 K16 400 0.28 0.10 EEVTG2A331M (3) 125 ✽Size code( ):Miniaturization product

Please refer to the page of “Reﬂ ow Proﬁ le” and “The Taping Dimensions”.
When requesting vibration-proof product, please put the last “V” instead to “P, Q, or M” Endurance : 125 °C 1000 h ( φ8/L115410.2 < : 2000 h) 00 Nov. 2012

Product Information

EEVTG1C331Q specifications and overview.

Summary

Aluminum Electrolytic Capacitors/ TG

Description

Aluminum Electrolytic Capacitors/ TG

Source title EEVTG1C331Q Datasheet(PDF) - Panasonic Semiconductor

Related Parts

More parts from the same family.

Browse manufacturer