EEVTG1A222M | DigiCamel IC Datasheet

Online Datasheet

Read EEVTG1A222M online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 3

Technical content

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ TG – EEE-50 – A±0.2 W ( ) Reference size L 0D±0.5 H B±0.2 (I) K (P) (I) 0.3 max. Pressure Relief (010 and larger) 5(" Capacitance (μF) Rated Voltage Mark Series identiﬁcation Mark for Lead-Free Products Black Dot (Square) Lot number Negative polarity marking (–) 5(" Capacitance (μF) Rated Voltage Mark Series identiﬁcation Lot number Negative polarity marking (–) ■ Features

Endurance:125 °C 1000 h to 2000 h
Miniaturization (40 % less than TA Series)
Low ESR (Low temp)
Vibration-proof product is available upon request. (08 mm and larger)
AEC-Q200 qualiﬁ ed✽
RoHS directive compliant (Parts No 08 to 010 : EEE✽, 012.5 to 018 : EEV✽) Surface Mount Type Series: TG Type: V ■ Specifi cations Category Temp. Range –40 °C to +125 °C Rated W.V. Range 10 V.DC to 100 V.DC Nominal Cap. Range 10 μF to 4700 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Cur rent I < 0.01 CV After 2 minutes tan d Please see the attached standard products list Characteristics at Low Temperature W.V. (V) 10 16 25 35 50 63 80 100 (Impedance ratio at 120 Hz)Z ( – 2 5 ° C ) / Z ( + 2 0 ° C ) 32222222 Z ( – 4 0 ° C ) / Z ( + 2 0 ° C ) 64433333 Endurance After applying rated working voltage for 1000 hours (08×6.2), 2000 hours (08×10.2<) at +125 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±30 % of initial measured value (code U : ±35 %) tan d < 300 % of initial speciﬁ ed value (code U : ±350 %) DC leakage current < initial speciﬁ ed value Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance (With voltage treatment) Resistance to Soldering Heat After reﬂ ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial speciﬁ ed value DC leakage current < initial speciﬁ ed value ■ Di men sions in mm (not to scale) ■ Marking Example : 10 V 100 μF, 10 V 1000 μF Marking coloc : BLACK Lead-Free products ( < 010) Lead-Free products ( > 012.5) Size code D L A, B H I W P K + 0.15 Frequency (Hz) 120 1 k 10 k 100 k to Correction factor 0.65 0.85 0.95 1.00 ■ Frequency correction factor for ripple current (Unit : mm) A 10 V C 16 V E 25 V V 35 V Rated Voltage Mark H 50 V J 63 V K 80 V 2A 100 V ✽ This product qualify for AEC-Q200, but it has some deviations. 01 Mar. 2014

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ TG – EEE-51 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Speciﬁ cation Part No. (RoHS:compliant) Reﬂ ow Min. Packaging Q'ty Dia. Length ✽Size Code Ripple Current (100 kHz) (+125 °C) ESR (100 kHz) (+20 °C) tan d (120 Hz) (+20 °C) Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω)( p c s ) 100 8 6.2 E 100 1.00 0.30 EEETG1A101P (2) 1000 220 86 . 2 ( E ) 1 0 0 1 . 0 0 0 . 3 0 EEETG1A221UP (2) 1000 81 0 . 2F 1 9 7 0 . 5 0 0 . 3 0 EEETG1A221P (2) 500 330 81 0 . 2 ( F )1 9 7 0 . 5 0 0 . 3 0 EEETG1A331UP (2) 500 10 10.2 G 270 0.30 0.30 EEETG1A331P (2) 500 470 10 10.2 (G) 270 0.30 0.30 EEETG1A471UP (2) 500 1000 12.5 13.5 H13 800 0. 12 0.30 EEVTG1A102Q (3) 200 1500 12.5 13.5 (H13) 800 0. 12 0.30 EEVTG1A152UQ (3) 200 2200 16 16.5 J16 1100 0.08 0.32 EEVTG1A222M (3) 125 3300 16 16.5 (J16) 1100 0.08 0.34 EEVTG1A332UM (3) 125 18 16.5 K16 1300 0.075 0.34 EEVTG1A332M (3) 125 4700 18 16.5 K16 1300 0.075 0.36 EEVTG1A472M (3) 125 100 8 10.2 F 197 0.50 0.23 EEETG1C101P (2) 500 220 81 0 . 2 ( F )1 9 7 0 . 5 0 0 . 2 3 EEETG1C221UP (2) 500 10 10.2 G 270 0.30 0.23 EEETG1C221P (2) 500 330 10 10.2 (G) 270 0.30 0.23 EEETG1C331UP (2) 500 12.5 13.5 H13 800 0.12 0.23 EEVTG1C331Q (3) 200 470 12.5 13.5 H13 800 0.12 0.23 EEVTG1C471Q (3) 200 680 12.5 13.5 H13 800 0.12 0.23 EEVTG1C681Q (3) 200 1000 12.5 13.5 (H13) 800 0.12 0.23 EEVTG1C102UQ (3) 200 16 16.5 J16 1100 0.08 0.23 EEVTG1C102M (3) 125 2200 16 16.5 (J16) 1100 0.08 0.25 EEVTG1C222UM (3) 125 18 16.5 K16 1300 0.075 0.25 EEVTG1C222M (3) 125 3300 18 16.5 K16 1300 0.075 0.27 EEVTG1C332M (3) 125 47 8 6.2 E 100 1.00 0.18 EEETG1E470P (2) 1000 100 86 . 2 ( E ) 1 0 0 1 . 0 0 0 . 1 8 EEETG1E101UP (2) 1000 81 0 . 2F 1 9 7 0 . 5 0 0 . 1 8 EEETG1E101P (2) 500 220 81 0 . 2 ( F )1 9 7 0 . 5 0 0 . 1 8 EEETG1E221UP (2) 500 10 10.2 G 270 0.30 0.18 EEETG1E221P (2) 500 330 10 10.2 (G) 270 0.30 0.18 EEETG1E331UP (2) 500 12.5 13.5 H13 800 0.12 0.18 EEVTG1E331Q (3) 200 470 12.5 13.5 H13 80 0 0.12 0.18 EEVTG1E471Q (3) 200 680 12.5 13.5 (H13) 800 0.12 0.18 EEVTG1E681UQ (3) 200 16 16.5 J16 1100 0.08 0.18 EEVTG1E681M (3) 125 1000 16 16.5 (J16) 1100 0.08 0.18 EEVTG1E102UM (3) 125 18 16.5 K16 1300 0.075 0.18 EEVTG1E102M (3) 125 2200 18 16.5 K16 1300 0.075 0.20 EEVTG1E222M (3) 125 33 8 6.2 E 100 1.00 0.16 EEETG1V330P (2) 1000 47 86 . 2 ( E ) 1 0 0 1 . 0 0 0 . 1 6 EEETG1V470UP (2) 1000 81 0 . 2F 1 9 7 0 . 5 0 0 . 1 6 EEETG1V470P (2) 500 100 81 0 . 2 ( F )1 9 7 0 . 5 0 0 . 1 6 EEETG1V101UP (2) 500 10 10.2 G 270 0.30 0.16 EEETG1V101P (2) 500 220 10 10.2 (G) 270 0.30 0.16 EEETG1V221UP (2) 500 330 12.5 13.5 H13 80 0 0.12 0.16 EEVTG1V331Q (3) 200 470 12.5 13.5 (H13) 800 0.12 0.16 EEVTG1V471UQ (3) 200 16 16.5 J16 1100 0.08 0.16 EEVTG1V471M (3) 125 680 16 16.5 (J16) 1100 0.08 0.16 EEVTG1V681UM (3) 125 18 16.5 K16 1300 0.075 0.16 EEVTG1V681M (3) 125 1000 18 16.5 K16 1300 0.075 0.16 EEVTG1V102M (3) 125 ✽Size code( ):Miniaturization product

Please refer to the page of “Reﬂ ow Proﬁ le” and “The Taping Dimensions”.
When requesting vibration-proof product, please put the last “V” instead to “P, Q, or M” Endurance : 125 °C 1000 h ( 08×10.2 < : 2000 h) 01 Mar. 2014

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ TG – EEE-52 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Speciﬁ cation Part No. (RoHS:compliant) Reﬂ ow Min. Packaging Q'ty Dia. Length ✽Size Code Ripple Current (100 kHz) (+125 °C) ESR (100 kHz) (+20 °C) tan d (120 Hz) (+20 °C) Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω)( p c s ) 10 8 6.2 E 80 1.60 0.14 EEETG1H100P (2) 1000 22 8 6.2 E 80 1.60 0.14 EEETG1H220P (2) 1000 33 86 . 2 ( E ) 8 0 1 . 6 0 0 . 1 4 EEETG1H330UP (2) 1000 81 0 . 2F 1 3 3 0 . 7 5 0 . 1 4 EEETG1H330P (2) 500 47 81 0 . 2 ( F ) 1 3 3 0 . 7 5 0 . 1 4 EEETG1H470UP (2) 500 10 10.2 G 221 0.50 0.14 EEETG1H470P (2) 500 100 10 10.2 (G) 221 0.50 0.14 EEETG1H101UP (2) 500 220 12.5 13.5 H13 600 0.23 0.14 EEVTG1H221Q (3) 200 330 12.5 13.5 H13 600 0.23 0.14 EEVTG1H331Q (3) 200 470 16 16.5 J16 9 0 0 0.15 0.14 EEVTG1H471M (3) 125 680 16 16.5 (J16) 900 0.15 0.14 EEVTG1H681UM (3) 125 18 16.5 K16 950 0.14 0.14 EEVTG1H681M (3) 125 1000 18 16.5 K16 950 0.14 0.14 EEVTG1H102M (3) 125 10 8 6.2 E 55 2.20 0.12 EEETG1J100P (2) 1000 2 2 81 0 . 2F1 0 0 1 . 0 0 0 . 1 2 EEETG1J220P (2) 500 33 8 10.2 (F) 100 1.00 0.12 EEETG1J330UP (2) 500 10 10.2 G 150 0.80 0.12 EEETG1J330P (2) 500 47 8 10.2 (F) 100 1.00 0.12 EEETG1J470UP (2) 500 10 10.2 G 150 0.80 0.12 EEETG1J470P (2) 500 100 10 10.2 (G) 150 0.80 0.12 EEETG1J101UP (2) 500 12.5 13.5 H13 350 0.26 0.12 EEVTG1J101Q (3) 200 220 12.5 13.5 H13 350 0.26 0.12 EEVTG1J221Q (3) 200 330 16 16.5 J16 50 0 0.18 0.12 EEVTG1J331M (3) 125 470 16 16.5 J16 50 0 0.18 0.12 EEVTG1J471M (3) 125 1 0 81 0 . 2F 7 0 1 . 3 0 0 . 1 2 EEETG1K100P (2) 500 22 8 10.2 (F) 70 1.30 0.12 EEETG1K220UP (2) 500 10 10.2 G 90 1.00 0.12 EEETG1K220P (2) 500 33 8 10.2 (F) 70 1.30 0.12 EEETG1K330UP (2) 500 10 10.2 G 90 1.00 0.12 EEETG1K330P (2) 500 47 10 10.2 (G) 90 1.00 0.12 EEETG1K470UP (2) 500 12.5 13.5 H13 250 0.42 0.12 EEVTG1K470Q (3) 200 100 12.5 13.5 (H13) 250 0.42 0.12 EEVTG1K101UQ (3) 200 16 16.5 J16 350 0.30 0.12 EEVTG1K101M (3) 125 220 16 16.5 (J16) 350 0.30 0.12 EEVTG1K221UM (3) 125 18 16.5 K16 400 0.28 0.12 EEVTG1K221M (3) 125 330 16 16.5 (J16) 350 0.30 0.12 EEVTG1K331UM (3) 125 18 16.5 K16 400 0.28 0.12 EEVTG1K331M (3) 125 470 18 16.5 K16 400 0.28 0.12 EEVTG1K471M (3) 125 100 1 0 81 0 . 2F 7 0 1 . 3 0 0 . 1 0 EEETG2A100P (2) 500 22 8 10.2 (F) 70 1.30 0.10 EEETG2A220UP (2) 500 10 10.2 G 90 1.00 0.10 EEETG2A220P (2) 500 33 10 10.2 G 90 1.00 0.10 EEETG2A330P (2) 500 47 12.5 13.5 H13 250 0.42 0.10 EEVTG2A470Q (3) 200 100 16 16.5 J16 350 0.30 0.10 EEVTG2A101M (3) 125 220 18 16.5 K16 400 0.28 0.10 EEVTG2A221M (3) 125 330 18 16.5 K16 400 0.28 0.10 EEVTG2A331M (3) 125 ✽Size code( ):Miniaturization product

Please refer to the page of “Reﬂ ow Proﬁ le” and “The Taping Dimensions”.
When requesting vibration-proof product, please put the last “V” instead to “P, Q, or M” Endurance : 125 °C 1000 h ( 08×10.2 < : 2000 h) 01 Mar. 2014

Product Information

EEVTG1A222M specifications and overview.

Summary

Aluminum Electrolytic Capacitors/ TG

Description

Aluminum Electrolytic Capacitors/ TG

Source title EEVTG1A222M Datasheet(PDF) - Panasonic Semiconductor

Related Parts

More parts from the same family.

Browse manufacturer