DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FK – EEE-41 – A±0.2 W ( ) Reference size L 0D±0.5 H B±0.2 (I) K (P) (I) 0.3 max. Pressure Relief (010 and larger) ',K Capacitance (μF) Rated Voltage Mark Series identification Mark for Lead-Free Products Black Dot (Square) Lot number Negative polarity marking (–) ',K Capacitance (μF) Rated Voltage Mark Series identification Lot number Negative polarity marking (–) ■ Features

  • Endurance: 2000 h to 5000 h at 105 °C
  • Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series)
  • Vibration-proof product is available upon request. (08 mm and larger)
  • AEC-Q200 qualifi ed✽
  • RoHS directive compliant Surface Mount Type Series: FK Type: V ■ Specifi cations Category Temp. Range –55 °C to +105 °C Nominal Cap.Range 3.3 μF to 6800 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) tan d Please see the attached standard products list Characteristics at Low Temperature W.V. (V) 6.3 10 16 25 35 50 63 80 100 (Impedance ratio at 120 Hz)Z ( – 2 5 ° C ) / Z ( + 2 0 ° C ) 222222222 Z ( – 4 0 ° C ) / Z ( + 2 0 ° C ) 333333333 Z ( – 5 5 ° C ) / Z ( + 2 0 ° C ) 444333333 Endurance After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ( > 012.5 and suffi x “G” in 08×10.2, 010×10.2 are 5000 hours) Capacitance change ±30 % of initial measured value (Suffi x “G” is 35 %) tan d < 200 % of initial specifi ed value (Suffi x “G” is 300 %) DC leakage current < initial specifi ed value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment) Resistance to Soldering Heat After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specifi ed value DC leakage current < initial specifi ed value ■ Di men sions in mm (not to scale) ■ Marking Example:6.3 V 22 μF, 6.3 V 3300 μF Marking color : BLACK < 010 Size code DL A , B H IWPK > 012.5 + 1.5 + 1.5 + 1.5 + 1.5 + 1.5 Frequency (Hz) 50, 60 120 1 k 10 k 100 k to ■ Frequency correction factor for ripple current j 6.3 V A 10 V C 16 V E 25 V V 35 V Rated Voltage Mark H 50 V J 63 V K 80 V 2A 100 V (Unit : mm) ✽ This product qualify for AEC-Q200, but it has some deviations. 01 Mar. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FK – EEE-42 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Part No. (RoHS:compliant) Refl ow Min. Packaging Q'ty Dia. Length ✽Size Code Ripple Current (100 kHz) (+105 °C) Impedance (100 kHz) (+20 °C) tan d (120 Hz) (+20 °C) Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω)( p c s ) 6.3 22 4 5.8 B 90 1.35 0.26 EEEFK0J220R (1) 2000 47 45 . 8 ( B )9 0 1 . 3 5 0 . 2 6 EEEFK0J470UR (1) 2000 5 5.8 C 160 0.70 0.26 EEEFK0J470R (1) 1000 100 5 5.8 (C) 160 0.70 0.26 EEEFK0J101UR (1) 1000 6.3 5.8 D 240 0.36 0.26 EEEFK0J101P (1) 1000 220 6.3 5.8 D 240 0.36 0.26 EEEFK0J221P (1) 1000 330 6.3 7.7 D8 280 0.34 0.26 EEEFK0J331XP (1) 900 8 6.2 E 300 0.26 0.26 EEEFK0J331P (2) 1000 470 8 10.2 F 600 0.16 0.26 EEEFK0J471P (2) 500 1000 8 10.2 F 600 0. 16 0.26 EEEFK0J102P (2) 500 1500 10 10.2 G 850 0.08 0.26 EEEFK0J152P (2) 500 3300 12.5 13.5 H13 1100 0.06 0.30 EEVFK0J332Q (3) 200 6800 16 16.5 J16 1800 0.035 0.36 EEVFK0J682M (3) 125 22 4 5.8 B 90 1.35 0.19 EEEFK1A220R (1) 2000 33 45 . 8 ( B )9 0 1 . 3 5 0 . 1 9 EEEFK1A330UR (1) 2000 5 5.8 C 160 0.70 0.19 EEEFK1A330R (1) 1000 150 6.3 5.8 D 240 0.36 0.19 EEEFK1A151P (1) 1000 220 6.3 7.7 D8 280 0.34 0.19 EEEFK1A221XP (1) 900 8 6.2 E 300 0.26 0.19 EEEFK1A221P (2) 1000 330 8 10.2 F 600 0.16 0.19 EEEFK1A331P (2) 500 470 8 10.2 F 600 0.16 0.19 EEEFK1A471P (2) 500 680 8 10.2 F 600 0.16 0.19 EEEFK1A681P (2) 500 1000 10 10.2 G 850 0.08 0.19 EEEFK1A102P (2) 500 2200 12.5 13.5 H13 1100 0.06 0.21 EEVFK1A222Q (3) 200 4700 16 16.5 J16 1800 0.035 0.25 EEVFK1A472M (3) 125 6800 18 16.5 K16 2060 0.033 0.29 EEVFK1A682M (3) 125 10 4 5.8 B 90 1.35 0.16 EEEFK1C100R (1) 2000 22 45 . 8 ( B )9 0 1 . 3 5 0 . 1 6 EEEFK1C220UR (1) 2000 5 5.8 C 160 0.70 0.16 EEEFK1C220R (1) 1000 47 5 5.8 (C) 160 0.70 0.16 EEEFK1C470UR (1) 1000 6.3 5.8 D 240 0.36 0.16 EEEFK1C470P (1) 1000 68 6.3 5.8 D 240 0.36 0.16 EEEFK1C680P (1) 1000 100 6.3 5.8 D 240 0.36 0.16 EEEFK1C101P (1) 1000 150 6.3 7.7 D8 280 0.34 0.16 EEEFK1C151XP (1) 900 220 6.3 7.7 D8 280 0.34 0.16 EEEFK1C221XP (1) 900 8 6.2 E 300 0.26 0.16 EEEFK1C221P (2) 1000 330 8 10.2 F 600 0.16 0.16 EEEFK1C331P (2) 500 470 8 10.2 F 600 0.16 0.16 EEEFK1C471P (2) 500 680 10 10.2 G 850 0.08 0.16 EEEFK1C681P (2) 500 1500 12.5 13.5 H13 1100 0.06 0.16 EEVFK1C152Q (3) 200 3300 16 16.5 J16 1800 0.035 0.20 EEVFK1C332M (3) 125 4700 18 16.5 K16 2060 0.033 0.22 EEVFK1C472M (3) 125 10 4 5.8 B 90 1.35 0.14 EEEFK1E100R (1) 2000 22 5 5.8 C 160 0.70 0.14 EEEFK1E220R (1) 1000 33 5 5.8 (C) 160 0.70 0.14 EEEFK1E330UR (1) 1000 6.3 5.8 D 240 0.36 0.14 EEEFK1E330P (1) 1000 47 6.3 5.8 D 240 0.36 0.14 EEEFK1E470P (1) 1000 68 6.3 5.8 D 240 0.36 0.14 EEEFK1E680P (1) 1000 100 6.3 7.7 D8 280 0.34 0.14 EEEFK1E101XP (1) 900 8 6.2 E 300 0.26 0.14 EEEFK1E101P (2) 1000 150 8 10.2 F 600 0.16 0.14 EEEFK1E151P (2) 500 220 8 10.2 F 600 0.16 0.14 EEEFK1E221P (2) 500 330 8 10.2 F 600 0.16 0.14 EEEFK1E331P (2) 500 470 10 10.2 G 850 0.08 0.14 EEEFK1E471P (2) 500 1000 12.5 13.5 H13 1100 0.06 0.14 EEVFK1E102Q (3) 200 1500 16 16.5 J16 1800 0.035 0.14 EEVFK1E152M (3) 125 2200 16 16.5 J16 1800 0.035 0.16 EEVFK1E222M (3) 125 3300 18 16.5 K16 2060 0.033 0.18 EEVFK1E332M (3) 125 ✽ Size code( ):Miniaturization product

  • Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
  • When requesting vibration-proof product, please put the last “V” instead to “P” Endurance : 105 °C 2000 h ( > 012.5 : 5000 h) 01 Mar. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FK – EEE-43 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Part No. (RoHS:compliant) Refl ow Min. Packaging Q'ty Dia. Length ✽Size Code Ripple Current (100 kHz) (+105 °C) Impedance (100 kHz) (+20 °C) tan d (120 Hz) (+20 °C) Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω)( p c s ) 4.7 4 5.8 B 90 1.35 0.12 EEEFK1V4R7R (1) 2000 10 45 . 8 ( B ) 9 0 1 . 3 5 0 . 1 2 EEEFK1V100UR (1) 2000 5 5.8 C 160 0.70 0.12 EEEFK1V100R (1) 1000 22 5 5.8 C 160 0.70 0.12 EEEFK1V220R (1) 1000 33 6.3 5.8 D 240 0.36 0.12 EEEFK1V330P (1) 1000 47 6.3 5.8 D 240 0.36 0.12 EEEFK1V470P (1) 1000 68 6.3 7.7 D8 280 0.34 0.12 EEEFK1V680XP (1) 900 100 6.3 7.7 D8 280 0.34 0.12 EEEFK1V101XP (1) 900 8 10.2 F 60 0 0.16 0.12 EEEFK1V101P (2) 500 150 8 10.2 F 600 0.16 0.12 EEEFK1V151P (2) 500 220 8 10.2 F 600 0.16 0.12 EEEFK1V221P (2) 500 330 10 10.2 G 850 0.08 0.12 EEEFK1V331P (2) 500 470 12.5 13.5 H13 1100 0.06 0.12 EEVFK1V471Q (3) 200 680 12.5 13.5 H13 1100 0.06 0.12 EEVFK1V681Q (3) 200 1000 16 16.5 J16 1800 0.035 0.12 EEVFK1V102M (3) 125 1500 16 16.5 J16 1800 0.035 0.12 EEVFK1V152M (3) 125 4.7 4 5.8 B 60 2.90 0.10 EEEFK1H4R7R (1) 2000 10 55 . 8 ( C ) 8 5 1 . 5 2 0 . 1 0 EEEFK1H100UR (1) 1000 6.3 5.8 D 165 0.88 0.10 EEEFK1H100P (1) 1000 22 6.3 5.8 D 165 0.88 0.10 EEEFK1H220P (1) 1000 33 6.3 7.7 D8 195 0.68 0.10 EEEFK1H330XP (1) 900 8 6.2 E 195 0.68 0.10 EEEFK1H330P (2) 1000 47 6.3 7.7 D8 195 0.68 0.10 EEEFK1H470XP (1) 900 8 6.2 E 195 0.68 0.10 EEEFK1H470P (2) 1000 100 8 10.2 F 350 0.34 0.10 EEEFK1H101P (2) 500 150 10 10.2 G 670 0.18 0.10 EEEFK1H151P (2) 500 220 10 10.2 G 670 0.18 0.10 EEEFK1H221P (2) 500 330 12.5 13.5 H13 9 0 0 0.12 0.10 EEVFK1H331Q (3) 200 39 0 12.5 13.5 H13 9 0 0 0.12 0.10 EEVFK1H391Q (3) 200 470 16 16.5 J16 1610 0.073 0.10 EEVFK1H471M (3) 125 560 16 16.5 J16 1610 0.073 0.10 EEVFK1H561M (3) 125 680 16 16.5 J16 1610 0.073 0.10 EEVFK1H681M (3) 125 1000 16 16.5 J16 1610 0.073 0.10 EEVFK1H102M (3) 125 4.7 5 5.8 C 50 3.00 0.08 EEEFK1J4R7R (1) 1000 10 6.3 5.8 D 80 1.50 0.08 EEEFK1J100P (1) 1000 22 6.3 7.7 D8 120 1.20 0.08 EEEFK1J220XP (1) 900 8 6.2 E 120 1.20 0.08 EEEFK1J220P (2) 1000 33 8 10.2 F 250 0.65 0.08 EEEFK1J330P (2) 500 47 8 10.2 F 250 0.65 0.08 EEEFK1J470P (2) 500 68 8 10.2 (F) 250 0.65 0.08 EEEFK1J680UP (2) 500 100 10 10.2 G 400 0.35 0.08 EEEFK1J101P (2) 500 150 12.5 13.5 H13 800 0.16 0.08 EEVFK1J151Q (3) 200 220 12.5 13.5 H13 800 0.16 0.08 EEVFK1J221Q (3) 200 470 16 16.5 J16 1410 0.082 0.08 EEVFK1J471M (3) 125 680 18 16.5 K16 1690 0.08 0.08 EEVFK1J681M (3) 125 3.3 5 5.8 C 25 5.00 0.08 EEEFK1K3R3R (1) 1000 10 6.3 7.7 D8 60 2.40 0.08 EEEFK1K100XP (1) 900 8 6.2 E 60 2.40 0.08 EEEFK1K100P (2) 1000 22 8 10.2 F 130 1.30 0.08 EEEFK1K220P (2) 500 33 8 10.2 F 130 1.30 0.08 EEEFK1K330P (2) 500 47 10 10.2 G 200 0.70 0.08 EEEFK1K470P (2) 500 68 12.5 13.5 H13 500 0.32 0.08 EEVFK1K680Q (3) 200 100 12.5 13.5 H13 500 0.32 0.08 EEVFK1K101Q (3) 200 150 12.5 13.5 H13 500 0.32 0.08 EEVFK1K151Q (3) 200 330 16 16.5 J16 793 0.17 0.08 EEVFK1K331M (3) 125 470 18 16.5 K16 917 0.153 0.08 EEVFK1K471M (3) 125 ✽ Size code( ):Miniaturization product

  • Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
  • When requesting vibration-proof product, please put the last “V” instead to “P” Endurance : 105 °C 2000 h ( > 012.5 : 5000 h) 01 Mar. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ FK – EEE-44 – ■ Endurace 5000 h Products W.V. Cap. (±20 %) Case size Specifi cation Part No. (RoHS:compliant) Refl ow Min. Packaging Q'ty Dia. Length Size Code Ripple Current (100 kHz) (+105 °C) Impedance (100 kHz) (+20 °C) tan d (120 Hz) (+20 °C) Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω)( p c s ) 6.3 470 8 10.2 F 600 0.16 0.26 EEEFK0J471GP (2) 500 1000 8 10.2 F 600 0. 16 0.26 EEEFK0J102GP (2) 500 1500 10 10.2 G 850 0.08 0.26 EEEFK0J152GP (2) 500 330 8 10.2 F 600 0.16 0.19 EEEFK1A331GP (2) 500 470 8 10.2 F 600 0.16 0.19 EEEFK1A471GP (2) 500 680 8 10.2 F 600 0.16 0.19 EEEFK1A681GP (2) 500 1000 10 10.2 G 850 0.08 0.19 EEEFK1A102GP (2) 500 330 8 10.2 F 600 0.16 0.16 EEEFK1C331GP (2) 500 470 8 10.2 F 600 0.16 0.16 EEEFK1C471GP (2) 500 680 10 10.2 G 850 0.08 0.16 EEEFK1C681GP (2) 500 150 8 10.2 F 600 0.16 0.14 EEEFK1E151GP (2) 500 220 8 10.2 F 600 0.16 0.14 EEEFK1E221GP (2) 500 330 8 10.2 F 600 0.16 0.14 EEEFK1E331GP (2) 500 470 10 10.2 G 850 0.08 0.14 EEEFK1E471GP (2) 500 100 8 10.2 F 600 0.16 0.12 EEEFK1V101GP (2) 500 150 8 10.2 F 600 0.16 0.12 EEEFK1V151GP (2) 500 220 8 10.2 F 600 0.16 0.12 EEEFK1V221GP (2) 500 330 10 10.2 G 850 0.08 0.12 EEEFK1V331GP (2) 500 100 8 10.2 F 350 0.34 0.10 EEEFK1H101GP (2) 500 150 10 10.2 G 670 0.18 0.10 EEEFK1H151GP (2) 500 220 10 10.2 G 670 0.18 0.10 EEEFK1H221GP (2) 500

  • Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
  • When requesting vibration-proof product, please put the last “V” instead to “P” Endurance : 105 °C 5000 h ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Part No. (RoHS:compliant) Refl ow Min. Packaging Q'ty Dia. Length ✽Size Code Ripple Current (100 kHz) (+105 °C) Impedance (100 kHz) (+20 °C) tan d (120 Hz) (+20 °C) Taping (V) (μF) (mm) (mm) (mA r.m.s.) (Ω)( p c s ) 100 22 8 10.2 F 130 1.30 0.07 EEEFK2A220P (2) 500 33 10 10.2 G 200 0.70 0.07 EEEFK2A330P (2) 500 47 12.5 13.5 H13 500 0.32 0.07 EEVFK2A470Q (3) 200 68 12.5 13.5 H13 500 0.32 0.07 EEVFK2A680Q (3) 200 100 16 16.5 J16 793 0.17 0.07 EEVFK2A101M (3) 125 150 16 16.5 J16 793 0.17 0.07 EEVFK2A151M (3) 125 220 18 16.5 K16 917 0.153 0.07 EEVFK2A221M (3) 125 330 18 16.5 K16 917 0.153 0.07 EEVFK2A331M (3) 125 Endurance : 105 °C 2000 h ( > 012.5 : 5000 h) ✽ Size code( ):Miniaturization product
  • Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”. 01 Mar. 2014