EEUEB1C102

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ EB – EEE-87 – 0D±0.5 08 010 F±0.5 Sleeve 14 min. 3 min.L= (08L15 only L±1.5)=L 16 : L±1.0 L 20 : L±2.0 Pressure relief 06.3 0D±0.5 fd±0.05 ■ Features

• Endurance : + 105 °C 5000 h to 10000 h
• Hight ripple hight frequency (Hight Voltage)
• RoHS directive compliant Radial Lead Type Series: EB Type: A ■ Specifi cations Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C Nominal Cap. Range 2.2 μF to 3300 μF 10 μF to 330 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes ap pli ca tion of rated working voltage at +20 °C (Whichever is greater) tan d Please see the attached standard products list Endurance After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below. (10 to 63 V.DC) Duration : 05×11 to 08×11.5 : 5000 hours 05×15 to 06.3×15 : 7000 hours 08×15 to 012.5×25 : 10000 hours Capacitance change ±30 % of initial measured value tan d < 300 % of initial specifi ed value DC leakage current < initial specifi ed value (160 to 450 V.DC) Duration : 5000 hours Capacitance change ±20 % of initial measured value tan d < 200 % of initial specifi ed value DC leakage current < initial specifi ed value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) Body Dia. 0D 5 6.3 8 10 12.5 16 18 ■ Frequency correction factor for ripple current (10 ~ 63 V.DC) Capacitance (μF) Frequency (Hz) 60 120 1 k 10 k 100 k W. V. (V. DC) Frequency (Hz) 120 1 k 10 k to 30k 30 k to 100k 160 to 250 0.55 0.85 0.90 1.00 350 to 450 0.50 0.80 0.90 1.00 ■ Di men sions in mm (not to scale) (Unit : mm) 02 May. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ EB – EEE-88 – ■ Standard Prod ucts W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (120 Hz) (+105 °C) tan d (120 Hz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping Taping (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 470 8 15 278 0.30 10000 0.6 3.5 5.0 EEUEB1A471( ) 200 1000 16 1000 10 20 430 0.25 10000 0.6 5.0 5.0 EEUEB1C102( ) 200 500 330 8 15 255 0.22 10000 0.6 3.5 5.0 EEUEB1E331( ) 200 1000 470 10 16 321 0.22 10000 0.6 5.0 5.0 EEUEB1E471( ) 200 500 220 8 15 197 0. 18 10000 0.6 3.5 5.0 EEUEB1V221( ) 200 1000 330 10 16 278 0. 18 10000 0.6 5.0 5.0 EEUEB1V331( ) 200 500 470 10 20 349 0. 18 10000 0.6 5.0 5.0 EEUEB1V471( ) 200 500 220 10 16 234 0. 15 10000 0.6 5.0 5.0 EEUEB1H221( ) 200 500 330 10 20 293 0. 15 10000 0.6 5.0 5.0 EEUEB1H331( ) 200 500 47 8 15 94 0. 12 10000 0.6 3.5 5.0 EEUEB1J470( ) 200 1000 100 8 15 180 0. 12 10000 0.6 3.5 5.0 EEUEB1J101( ) 200 1000 220 10 20 292 0. 12 10000 0.6 5.0 5.0 EEUEB1J221( ) 200 500

• When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
• Please refer to the page of “Taping Dimensions”. ✽✽✽ Please kindly accept last shipment : 31/Mar/2015 Endurance : 105 °C 05×11 to 08×11.5=5000 h, 05×15 to 06.3×15=7000 h, 08×15 to 012.5×25=10000 h 02 May. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ EB – EEE-89 – W.V. Cap. (±20 %) Case size Specifi cation Lead Length Part No. Min. Packaging Q'ty Dia. Length Ripple Current (100 kHz) (+105 °C) tan d (120 Hz) (+20 °C) Endur- ance Lead Dia. Lead Space Straight Leads TapingStraight Taping (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (pcs) (pcs) 160 22 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2C220( ) 200 500 33 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2C330( ) 200 500 16 20 750 0. 15 5000 0.8 7 .5 7 .5 EEUEB2C680S( ) 100 250 100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101( ) 100 250 18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101S( ) 100 250 150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C151 100 – 18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C151S( ) 100 250 220 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C221 100 – 18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C221S( ) 100 250 330 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2C331 50 – 200 22 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2D220( ) 200 500 16 20 750 0. 15 5000 0.8 7 .5 7 .5 EEUEB2D680S( ) 100 250 100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101( ) 100 250 18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101S( ) 100 250 150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2D151 100 – 18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2D151S( ) 100 250 220 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2D221 50 – 250 16 20 710 0. 15 5000 0.8 7 .5 7 .5 EEUEB2E470S( ) 100 250 68 16 25 990 0. 15 5000 0.8 7 .5 7 .5 EEUEB2E680( ) 100 250 18 20 990 0. 15 5000 0.8 7 .5 7 .5 EEUEB2E680S( ) 100 250 100 16 31.5 1200 0. 15 5000 0.8 7 .5 – EEUEB2E101 100 – 18 25 1200 0. 15 5000 0.8 7 .5 7 .5 EEUEB2E101S( ) 100 250 150 18 31.5 1470 0.15 5000 0.8 7.5 – EEUEB2E151 50 – 350 10 10 20 270 0.20 5000 0.6 5.0 5.0 EEUEB2V100( ) 200 500 33 16 20 480 0.20 5000 0.8 7 .5 7 .5 EEUEB2V330S( ) 100 250 47 16 25 640 0.20 5000 0.8 7 .5 7 .5 EEUEB2V470( ) 100 250 18 20 640 0.20 5000 0.8 7 .5 7 .5 EEUEB2V470S( ) 100 250 68 16 31.5 780 0.20 5000 0.8 7.5 – EEUEB2V680 100 – 18 25 780 0.20 5000 0.8 7 .5 7 .5 EEUEB2V680S( ) 100 250 100 18 31.5 970 0.20 5000 0.8 7.5 – EEUEB2V101 50 – 400 10 10 20 250 0.24 5000 0.6 5.0 5.0 EEUEB2G100( ) 200 500 16 20 410 0.24 5000 0.8 7 .5 7 .5 EEUEB2G220S( ) 100 250 33 16 25 600 0.24 5000 0.8 7 .5 7 .5 EEUEB2G330( ) 100 250 18 20 600 0.24 5000 0.8 7 .5 7 .5 EEUEB2G330S( ) 100 250 47 16 31.5 730 0.24 5000 0.8 7.5 – EEUEB2G470 100 – 18 25 730 0.24 5000 0.8 7 .5 7 .5 EEUEB2G470S( ) 100 250 450 22 16 25 560 0.24 5000 0.8 7 .5 7 .5 EEUEB2W220( ) 100 250 18 20 560 0.24 5000 0.8 7 .5 7 .5 EEUEB2W220S( ) 100 250 33 16 31.5 680 0.24 5000 0.8 7.5 – EEUEB2W330( ) 100 – 18 25 680 0.24 5000 0.8 7 .5 7 .5 EEUEB2W330S( ) 100 250 47 18 31.5 850 0.24 5000 0.8 7.5 – EEUEB2W470 50 – ■ Standard Prod ucts

• When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
• Please refer to the page of “Taping Dimensions”. Endurance : 105 °C 5000 h 02 May. 2014