EETED2D152LJ

EETED2D271HJ PANASONIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ ED φD+1.0 max. 1.5±0.2 2.0 max. Terminal (t=0.8) 4.0±0.5 4.0±0.5(3.5) Top of spin Standard terminal type does not require terminal trimming process. Rated voltage etc. indicate to sleeve. L+2.0 max. (10.0) 10. 0±0.1 2-φ2.0±0.1 Sleeve Vent Polarity bar Recommended PWB piercing plan 0.8 +0.2 –0.1 (φD) ■ Features

• Endurance : 105 °C 3000 h
• High ripple current capability in high frequency range.
• RoHS directive compliant Snap-in Type Series: ED Type: TS ■ Specifi cations ■ Di men sions in mm (not to scale) Category Temp. Range –40 °C to + 105 °C –25 °C to +105 °C Nominal Cap. Range 2 20 µF to 2200 µF 56 µF to 560 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakag e Current 3/L50496CV (µA) max. After 5 minutes application of rated working voltage at +20 °C C : Capacitance (µF) V: W.V. (V.DC) tan δ Please see the attached standard products list Frequency Correction Factor for Ripple Current Frequency (Hz) 50 60 100 120 500 1 k 10 k to Endurance After 3000 hours application of DC voltage with specifi ed ripple current (< rated DC working voltage) at +105 °C±2 °C, the capacitors shall meet the following limits. Capacitance change <±20 % of initial measured value tan δ < 200 % of initial specifi ed value DC leakage current < initial specifi ed value Shelf Life After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment) (mm) Jul. 2008

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ ED ■ Standard Prod ucts W.V. Cap. (120 Hz) (±20 %) Case size Part No. Specifi cation Min. Packaging Q'ty Dia. Length PET sleeve Terminal Length 4.0 mm (Without Top Plate) Ripple Current (50 kHz) (+105 °C) tan δ (120 Hz) (+20 °C) max. (V. DC) (µF) ( mm) (mm) (A r.m.s.) (pcs) 200 270 22 25 EETED2D271HJ 2.03 0.15 200 330 22 30 EETED2D331HJ 2.23 0.15 200 390 22 30 EETED2D391HJ 2.44 0.15 200 25 25 EETED2D391JJ 2.44 0.15 200 470 22 35 EETED2D471HJ 2.64 0.15 200 25 30 EETED2D471JJ 2.64 0.15 200 560 22 40 EETED2D561HJ 3.05 0.15 200 25 30 EETED2D561JJ 3.05 0.15 200 30 25 EETED2D561KJ 3.05 0.15 200 680 22 45 EETED2D681HJ 3.45 0.15 200 25 35 EETED2D681JJ 3.45 0.15 200 30 30 EETED2D681KJ 3.45 0.15 200 820 22 50 EETED2D821HJ 3.76 0.15 200 25 40 EETED2D821JJ 3.76 0.15 200 30 30 EETED2D821KJ 3.76 0.15 200 35 25 EETED2D821LJ 3.76 0.15 200 1000 25 45 EETED2D102JJ 4.06 0.15 200 30 35 EETED2D102KJ 4.06 0.15 100 35 30 EETED2D102LJ 4.06 0.15 200 1200 30 40 EETED2D122KJ 4.47 0.15 100 35 35 EETED2D122LJ 4.47 0.15 100 1500 30 50 EETED2D152KJ 5.08 0.15 100 35 40 EETED2D152LJ 5.08 0.15 100 1800 35 45 EETED2D182LJ 5.48 0.15 100 2200 35 50 EETED2D222LJ 5.89 0.15 100 220 270 22 30 EETED2Q271HJ 2.03 0.15 200 330 22 30 EETED2Q331HJ 2.23 0.15 200 25 25 EETED2Q331JJ 2.23 0.15 200 390 22 35 EETED2Q391HJ 2.44 0.15 200 25 30 EETED2Q391JJ 2.44 0.15 200 470 22 40 EETED2Q471HJ 2.64 0.15 200 25 30 EETED2Q471JJ 2.64 0.15 200 30 25 EETED2Q471KJ 2.64 0.15 200 560 22 45 EETED2Q561HJ 3.05 0.15 200 25 35 EETED2Q561JJ 3.05 0.15 200 30 30 EETED2Q561KJ 3.05 0.15 200 680 25 40 EETED2Q681JJ 3.45 0.15 200 30 30 EETED2Q681KJ 3.45 0.15 200 35 25 EETED2Q681LJ 3.45 0.15 200 820 25 45 EETED2Q821JJ 3.76 0.15 200 30 35 EETED2Q821KJ 3.76 0.15 100 35 30 EETED2Q821LJ 3.76 0.15 200 1000 30 40 EETED2Q102KJ 4.06 0.15 100 35 35 EETED2Q102LJ 4.06 0.15 100 1200 30 45 EETED2Q122KJ 4.47 0.15 100 35 40 EETED2Q122LJ 4.47 0.15 100 1500 35 45 EETED2Q152LJ 5.08 0.15 100 1800 35 50 EETED2Q182LJ 5.48 0.15 100 Endurance : 105 °C 3000 h Terminal Pitch : 10 mm ✽ When capacitors of φ35/L115445L and φ35/L115450L are mount ed on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives in clud ing halogenated compositions.) Jul. 2008

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ ED ■ Standard Prod ucts W.V. Cap. (120 Hz) (±20 %) Case size Part No. Specifi cation Min. Packaging Q'ty Dia. Length PET sleeve Terminal Length 4.0 mm (Without Top Plate) Ripple Current (50 kHz) (+105 °C) tan δ (120 Hz) (+20 °C) max. (V. DC) (µF) ( mm) (mm) (A r.m.s.) (pcs) 250 220 22 30 EETED2E221HJ 1.83 0.15 200 270 22 30 EETED2E271HJ 2.03 0.15 200 25 25 EETED2E271JJ 2.03 0.15 200 330 22 35 EETED2E331HJ 2.23 0.15 200 25 30 EETED2E331JJ 2.23 0.15 200 390 22 40 EETED2E391HJ 2.44 0.15 200 25 30 EETED2E391JJ 2.44 0.15 200 30 25 EETED2E391KJ 2.44 0.15 200 470 22 45 EETED2E471HJ 2.64 0.15 200 25 35 EETED2E471JJ 2.64 0.15 200 30 30 EETED2E471KJ 2.64 0.15 200 560 25 40 EETED2E561JJ 3.05 0.15 200 30 30 EETED2E561KJ 3.05 0.15 200 35 25 EETED2E561LJ 3.05 0.15 200 680 25 45 EETED2E681JJ 3.45 0.15 200 30 35 EETED2E681KJ 3.45 0.15 100 35 30 EETED2E681LJ 3.45 0.15 200 820 30 40 EETED2E821KJ 3.76 0.15 100 35 35 EETED2E821LJ 3.76 0.15 100 1000 30 50 EETED2E102KJ 4.06 0.15 100 35 40 EETED2E102LJ 4.06 0.15 100 1200 35 45 EETED2E122LJ 4.47 0.15 100 1500 35 50 EETED2E152LJ 5.08 0.15 100 400 82 22 25 EETED2G820HJ 1.14 0.15 200 100 22 30 EETED2G101HJ 1.30 0.15 200 25 25 EETED2G101JJ 1.30 0.15 200 120 22 35 EETED2G121HJ 1.46 0.15 200 25 30 EETED2G121JJ 1.46 0.15 200 150 22 40 EETED2G151HJ 1.53 0.15 200 25 30 EETED2G151JJ 1.53 0.15 200 30 25 EETED2G151KJ 1.53 0.15 200 180 22 45 EETED2G181HJ 1.60 0.15 200 25 35 EETED2G181JJ 1.60 0.15 200 30 30 EETED2G181KJ 1.60 0.15 200 220 22 50 EETED2G221HJ 2.03 0.15 200 25 40 EETED2G221JJ 2.03 0.15 200 30 30 EETED2G221KJ 2.03 0.15 200 35 25 EETED2G221LJ 2.03 0.15 200 270 25 45 EETED2G271JJ 2.23 0.15 200 30 35 EETED2G271KJ 2.23 0.15 100 35 30 EETED2G271LJ 2.23 0.15 200 330 30 40 EETED2G331KJ 2.44 0.15 100 35 30 EETED2G331LJ 2.44 0.15 200 390 30 45 EETED2G391KJ 2.64 0.15 100 35 35 EETED2G391LJ 2.64 0.15 100 470 35 40 EETED2G471LJ 2.84 0.15 100 560 35 45 EETED2G561LJ 3.05 0.15 100 Endurance : 105 °C 3000 h Terminal Pitch : 10 mm ✽ When capacitors of φ35/L115445L and φ35/L115450L are mount ed on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives in clud ing halogenated compositions.) Jul. 2008

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Aluminum Electrolytic Capacitors/ ED ■ Standard Prod ucts W.V. Cap. (120 Hz) (±20 %) Case size Part No. Specifi cation Min. Packaging Q'ty Dia. Length PET sleeve Terminal Length 4.0 mm (Without Top Plate) Ripple Current (50 kHz) (+105 °C) tan δ (120 Hz) (+20 °C) max. (V. DC) (µF) ( mm) (mm) (A r.m.s.) (pcs) 420 68 22 25 EETED2S680HJ 1.08 0.15 200 82 22 30 EETED2S820HJ 1.14 0.15 200 25 25 EETED2S820JJ 1.14 0.15 200 100 22 30 EETED2S101HJ 1.30 0.15 200 25 25 EETED2S101JJ 1.30 0.15 200 120 22 35 EETED2S121HJ 1.46 0.15 200 25 30 EETED2S121JJ 1.46 0.15 200 150 22 40 EETED2S151HJ 1.53 0.15 200 25 35 EETED2S151JJ 1.53 0.15 200 30 25 EETED2S151KJ 1.53 0.15 200 180 22 45 EETED2S181HJ 1.60 0.15 200 25 40 EETED2S181JJ 1.60 0.15 200 30 30 EETED2S181KJ 1.60 0.15 200 35 25 EETED2S181LJ 1.60 0.15 200 220 25 45 EETED2S221JJ 2.03 0.15 200 30 35 EETED2S221KJ 2.03 0.15 100 35 30 EETED2S221LJ 2.03 0.15 200 270 25 50 EETED2S271JJ 2.40 0.15 200 30 40 EETED2S271KJ 2.40 0.15 100 35 30 EETED2S271LJ 2.40 0.15 200 330 30 45 EETED2S331KJ 2.54 0.15 100 35 35 EETED2S331LJ 2.54 0.15 100 390 30 50 EETED2S391KJ 2.73 0.15 100 35 40 EETED2S391LJ 2.73 0.15 100 470 35 45 EETED2S471LJ 3.18 0.15 100 450 56 22 25 EETED2W560HJ 0.95 0.15 200 68 22 30 EETED2W680HJ 1.08 0.15 200 25 25 EETED2W680JJ 1.08 0.15 200 82 22 30 EETED2W820HJ 1.14 0.15 200 25 25 EETED2W820JJ 1.14 0.15 200 100 22 35 EETED2W101HJ 1.30 0.15 200 25 30 EETED2W101JJ 1.30 0.15 200 120 22 40 EETED2W121HJ 1.46 0.15 200 25 35 EETED2W121JJ 1.46 0.15 200 30 25 EETED2W121KJ 1.46 0.15 200 150 22 45 EETED2W151HJ 1.53 0.15 200 25 40 EETED2W151JJ 1.53 0.15 200 30 30 EETED2W151KJ 1.53 0.15 200 35 25 EETED2W151LJ 1.53 0.15 200 180 22 50 EETED2W181HJ 1.60 0.15 200 25 40 EETED2W181JJ 1.60 0.15 200 30 30 EETED2W181KJ 1.60 0.15 200 35 25 EETED2W181LJ 1.60 0.15 200 220 25 45 EETED2W221JJ 2.03 0.15 200 30 35 EETED2W221KJ 2.03 0.15 100 35 30 EETED2W221LJ 2.03 0.15 200 270 30 40 EETED2W271KJ 2.45 0.15 100 35 35 EETED2W271LJ 2.45 0.15 100 330 30 50 EETED2W331KJ 2.64 0.15 100 35 40 EETED2W331LJ 2.64 0.15 100 390 35 40 EETED2W391LJ 2.82 0.15 100 470 35 50 EETED2W471LJ 3.53 0.15 100 Endurance : 105 °C 3000 h Terminal Pitch : 10 mm ✽ When capacitors of φ35/L115445L and φ35/L115450L are mount ed on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives in clud ing halogenated compositions.) Jul. 2008