DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA – EEE-2 – ;"& Capacitance (μF) Rated Voltage Mark Series identification Lot number Negative polarity marking (–) A±0.2 W ( ) Reference size L 0D±0.5 H B±0.2 (I) K (P) (I) 0.3 max. Pressure Relief (010 and larger) ■ Features

  • Endurance: 10000 h at 105 °C
  • Low ESR and High ripple current (70 % over, Lower ESR than Current V-FP)
  • High voltage (to 80 V)
  • Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency)
  • AEC-Q200 qualifi ed✽
  • RoHS directive compliant Surface Mount Type Series: ZA Type: V High temperature Lead-Free refl ow ■ Specifi cations Category Temp. Range –55 °C to +105 °C Rated W.V.Range 25 V.DC to 80 V.DC Nominal Cap.Range 10 μF to 330 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) tan d Please see the attached Standard Products list Endurance The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at + 105 °C for 10000 hours. After stabilizing at room temperature(+15 to 35 °C), the capacitor shall not exceed the specifi ed limits. (The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.) Capacitance change ±30 % of initial measured value tan d < 200 % of initial specifi ed value E. S. R. < 200 % of initial specifi ed value DC leakage current < initial specifi ed value ESR after Endurance (Ω/100 kHz) (–40 °C) Size Code CD D 8 FG Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) Resistance to Soldering Heat After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specifi ed value DC leakage current < initial specifi ed value ■ Di men sions in mm (not to scale)■ Marking Example:25 V 33 μF Marking color : BLACK Rated Voltage Mark Frequency (Hz) 120 1 k 10 k 100 k to Correction factor 0.10 0.30 0.60 1.00 ■ Frequency correction factor for ripple current Size code D L A, B H I W P K + 0.15 + 0.15 + 0.15E 25 V V 35 V H 50 V J 63 V K 80 V (Unit : mm) ✽ This product qualify for AEC-Q200, but it has some deviations. 02 Mar. 2014

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA – EEE-3 – ■ Standard Productsɹɹɹɹɹɹɹ

  • Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”. Endurance : 105 °C 10000 h W.V. Cap. (±20 %) Case size Specifi cation Part No. (RoHS:compliant) Refl ow Min. Packaging Q'ty Dia. Length Size Code Ripple Current (100 kHz) (+105 °C) E.S.R. (100 kHz) (+20 °C) tan d (120 Hz) (+20 °C) Taping (V) (μF) (mm) (mm) (mA r.m.s.) (mΩ)( p c s ) 33 5 5.8 C 900 80 0.14 EEHZA1E330R (5) 1000 56 6.3 5.8 D 1300 50 0.14 EEHZA1E560P (5) 1000 100 6.3 7 .7 D8 2000 30 0. 14 EEHZA1E101XP (5) 900 220 8 10.2 F 2300 27 0.14 EEHZA1E221P (6) 500 330 10 10.2 G 2500 20 0.14 EEHZA1E331P (6) 500 22 5 5.8 C 900 100 0.12 EEHZA1V220R (5) 1000 27 6.3 5.8 D 1300 60 0.12 EEHZA1V270P (5) 1000 47 6.3 5.8 D 1300 60 0.12 EEHZA1V470P (5) 1000 68 6.3 7 .7 D8 2000 35 0. 12 EEHZA1V680XP (5) 900 150 8 10.2 F 2300 27 0.12 EEHZA1V151P (6) 500 270 10 10.2 G 2500 20 0.12 EEHZA1V271P (6) 500 10 5 5.8 C 750 120 0.10 EEHZA1H100R (5) 1000 22 6.3 5.8 D 1100 80 0.10 EEHZA1H220P (5) 1000 33 6.3 7 .7 D8 1600 40 0.10 EEHZA1H330XP (5) 900 68 8 10.2 F 1800 30 0.10 EEHZA1H680P (6) 500 100 10 10.2 G 2000 28 0.10 EEHZA1H101P (6) 500 10 6.3 5.8 D 1000 120 0.08 EEHZA1J100P (5) 1000 22 6.3 7.7 D8 1500 80 0.08 EEHZA1J220XP (5) 900 33 8 10.2 F 1700 40 0.08 EEHZA1J330P (6) 500 56 10 10.2 G 1800 30 0.08 EEHZA1J560P (6) 500 80 22 8 10.2 F 1550 45 0.08 EEHZA1K220P (6) 500 33 10 10.2 G 1700 36 0.08 EEHZA1K330P (6) 500 02 Mar. 2014