EE94-513G5-S

EE94-51XG5-S CONNOR-WINFIELD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

5xxG5-series is a fixed frequency 10 pad surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and tight frequency stability. Operating at 3.3V supply voltage, the EE94- 5xxG5-series provides option for LVPECL differential outputs and/or an enable / disable function. EE94-543G5 - 155.52MHz LVPECL CLOCK SERIES CENTER FREQUENCY

FEATURES

DESCRIPTION

ORDERING INFORMATION

3.3V OPERATION OVERALL FREQUENCY TOLERANCE: EE94-51xG5 - ±25PPM EE94-52xG5 - ±50PPM EE94-53xG5 - ±100PPM EE94-54xG5 - ±20PPM TEMPERATURE RANGE: 0 to 70 LVPECL DIFFERENTIAL OUTPUTS ENABLE/DISABLE FUNCTION LOW JITTER <1pS RMS SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS 5/6 COMPLIANT SURFACE MOUNT 3.3V LVPECL CLOCK EE94-51xG5-Series EE94-52xG5-Series EE94-53xG5-Series EE94-54xG5-Series Ec230 07/27/06 ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 125 Supply Voltage (Vcc) -0.5 7.0 Vdc MODEL SPECIFICATIONS: TABLE 2.0 MODEL EE94-51*G5 * Added pin connection option number. See table 8 Center Frequency (Fo) 167 MHz Total Frequency Tolerance -25 ppm MODEL EE94-52*G5 * Added pin connection option number. See table 8 Center Frequency (Fo) 200 MHz Total Frequency Tolerance -50 ppm MODEL EE94-53*G5 * Added pin connection option number. See table 8 Center Frequency (Fo) 200 MHz Total Frequency Tolerance -100 100 ppm MODEL EE94-54*G5 * Added pin connection option number. See table 8 Center Frequency (Fo) 167 MHz Total Frequency Tolerance -20 ppm OPERATING SPECIFICATIONS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Operating Temperature Range Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) mA Jitter (BW=10Hz to 20MHz) pS RMS Jitter (BW=12kHz to 20MHz) pS RMS SSB Phase Noise at 100Hz offset -60 dBc/Hz SSB Phase Noise at 1KHz offset -100 dBc/Hz SSB Phase Noise at 10KHz offset -130 dBc/Hz SSB Phase Noise at 100KHz offset -140 dBc/Hz ENABLE / DISABLE INPUT CHARACTERISTICS Disable Input Voltage (High) (Vih) 2.275 Vdc Enable Input Voltage (Low) (Vil) 1.68 Vdc LVPECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD Ohms Voltage (High) (Voh) 2.275 Vdc (Low) (Vol) 1.68 Vdc Duty Cycle Rise / Fall Time 20% to 80% ns PROCESS RECOMMENDATIONS TABLE 6.0 Soldering Process See solder profile page 2. PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed, leadless ceramic package. CW 0629 EE94-543G5 155.52M CW 0629 EE94-543G5 155.52M THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS

“1” LEVEL “0” LEVEL Solder Profile Test Circuit Options Chart (Replace the x with an option number) Dimensional Tolerance: ±.005” (.127mm) Pin Connections Option Pin Q Q Notes Inclusive of calibration tolerance @ 25°C, frequency vs. temperature, frequency vs. change in supply voltage, frequency vs. load variations, shock and vibration and 10 years aging. When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. Duty Cycle measured at 1.977V TABLE 7.0 Pin Connection N/C Option Pin N/C Ground (Vee) N/C Option Pin Q Output N/C + Supply (Vcc) N/C TABLE 8.0 Option Number Option Description: Pin 2 and Pin 6: No Connection Pin 6 Complementary Output, Pin 2 No Connection Pin 2 Enable / Disable Function, Pin 6 No Connection (Note: When oscillator is disabled the output, pin 7 is in a high state (Voh). Pin 2 Complementary Output, Pin 6 No Connection Pin 2 Enable / Disable Function, Pin 6 Complementary Output (Note: When oscillator is disabled the output pin 7 is in a high state (Voh) and pin 6 is in a low state(Vol). Package Outline THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS CW 0629 EE94-543G5 155.52M CW 0629 EE94-543G5 155.52M 100°C 150°C 225°C 25°C 183°C 360 Sec. Max. 60-120s Max. 60-150s Max. Time Temperature 225°C tp Ramp-Down Rate 6°C/second max. 10-30s Ramp-Up Rate 3°C/second max. from 150°C to 225°C.