ED050SC3 AZDISPLAYS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
Datasheet sections
- 1 Application
- 2 Features
- 3 Mechanical Specifications
- 4 Mechanical Drawing of EPD module
- 5 Input/Output Terminals
- 6 Electrical Characteristics
- 7 Power on Sequence
- 8 Optical Characteristics 1
- 9 Handling, Safety and Environment Requirements
- 10 Reliability test
- 11 Bar Code Definition
- 12 Border Definition
- 13 Block Diagram
- 14 Packing
The information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o., Ltd.P AG E :1 V ers ion: 2.0 T E CHNICA L SPE CIFICA T ION MODE L NO. : E D050SC3 T he content of this information is subject to be changed without notice. Please contact PV I or its agent for further information Customers Confirmation Customer Date B y PV Is Confirmation Confirmed B y Prepared B y FOR MORE INFORMATION: AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA, 92656
Http://www.AZDISPLAYS.com
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2
Revision History
Rev. Issued Date R evised Contents 1.0 August.15. 2008 New 2.0 October.7. 2008 Add Page 7 6- 2) Absolute maximum rating Page 16 11.Bar Code definition Page 17 1 2.Border definition Modify Page 4 3. Mechanical Specifications Page 7 6-3) Panel DC characteristics Page 9 7.Power on sequence Page 14 9. Handling, Safety and Environment Requirements Del Preliminary specification Page 15 10. Reliability test 14.Stylus Tapping Top R:0.4mm Load: 300gf Speed: 5 times/sec Total 13,500times change to Top R:0.8mm Load: 300gf Speed: 2 times/sec Total 13,500times Del Page 13 Note 8-1
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 1. Application The display is a TFT active matrix electrophoretic display, with associated interface and control logic, and a reference system design. The 5” active area contains 800x600 pixels, and has full 1~4 bit display capabilities An integrated circuit containing interface, timing and control logic is supplied with each panel. 2. Features /head2right High contrast TFT electrophoretic /head2right 800x600 display /head2right High reflectance /head2right Ultra wide viewing angle /head2right Ultra low power consumption /head2right Pure reflective mode /head2right Bi-stable /head2right Commercial temperature range /head2right Landscape, portrait mode /head2right Antiglare hard-coated front-surface 3. Mechanical Specifications Parameter Specifications Unit R emark Screen Size 5 Inch Display Resolution 800 (H) ͪ600(V) Pixel Active Area 101.6 (H)ͪ76.2 (V) mm Pixel Pitch 0.127(H)x0.127(V) mm Pixel Configuration Rectangle Outline Dimension 114.6(H) ͪ89.6(V) ͪ1.18(D) (panel area height) 114.6(H) ͪ89.6(V) ͪ2.0(D) (FPC area height with capacitor) mm Panel height is measured without released film Module Weight 24̈́2 g
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 4. Mechanical Drawing of EPD Module
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 5. Input/Output Terminals 5-1)Pinout List Pin # Signal Description
1 VNE G Negative power supply source driver
2 NC NO Connection
3 VPOS Positive power supply source driver
4 NC NO Connection
5 VSS Ground
6 NC NO Connection
7 VDD Digital power supply drivers
8 XCL Cloc k source driver
9 XLE Latch enable source driver
10 XOE Output enable source driver
11 XSH R Shift direction source driver
12 XSTL2 Start pulse source driver
13 D0 Data signal source driver
14 D1 Data signal source driver
15 D2 Data signal source driver
16 D3 Data signal source driver
17 D4 Data signal source driver
18 D5 Data signal source driver
19 D6 Data signal source driver
20 D7 Data signal source driver
21 NC NO Connection
22 VCOM Common connection
23 NC NO Connection
24 V GG Positive power supply gate driver
25 NC NO Connection
26 VEE Negative power supply gate driver
27 NC NO Connection
28 MODE2 Output mode selection gate driver
29 MODE1 Output mode selection gate driver
30 X RL Shift direction gate driver
31 SPV Start pulse 1st gate driver
32 CKV Cloc k 1st gate driver
33 BO RDER Border connection
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 6.Electrical Characteristics 6-1) Panel interface description This panel is driven by ASIC PVI-6001A or “Apollo” display controller ASIC. See control product specification for details. 6-2) Absolute maximum rating 6-3) Panel DC characteristics Parameter Symbol Conditions Min Typ Max Unit Signal ground V SS - 0 - V VDD 3.0 3.3 3.6 V Logic Voltage supply IVDD V DD=3.3V - 0.5 1 mA VEE -21 -20 -19 V Gate Negative supply IEE V EE =-20V - 5 15 mA VGG 21 22 23 V Gate Positive supply IGG V GG = 22V - 1.4 4.2 mA VNEG -15.4 -15 -14.6 V Source Negative supply INEG V NEG = -15V - 22 44 mA VPOS 14.6 15 15.4 V Source Positive supply IPOS V POS = 15V - 24 48 mA VPOS = 15V 14.6 15 15.4 V Border supply VBorder VNEG = -15V -15.4 -15 -14.6 V Asymmetry source V Asym V POS+VNEG -800 0 800 mV VCOM -2.5 Adjusted -1.0 V Common voltage ICOM - 0.25 - mA Maximum power panel P MAX - - 1850 mW Standby power panel P STBY - - 0.4 mW Typical power panel P TYP - 850 - mW Operating temperature 0 - 50 к Storage temperature -25 - 70 к Maximum image update time at 25к - 1000 - ms Parameter Symbol Rating Unit Logic Supply Voltage VDD -0.3 to +7 V Positive Supply Voltage V POS -0.3 to +18 V Negative Supply Voltage V NEG +0.3 to -18 V Max .Drive Voltage Range VPOS - VNEG 36 V Supply Voltage VGG -0.3 to +45 V Supply Voltage VEE - 25.0 to +0.3 V Supply Range VGG-VEE -0.3 to +45 V Operating Temp. Range TOT R 0 to +50 к Storage Temperature TSTG - 25 to +70 к
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 - The maximum power and maximum currents are specified for the worse case power consumption. This occurs when 2 horizontal inverted stripped images are displayed - The typical power is the consumed power when “typical images” are displayed. - The standby power is the consumed power wh en the panel controller is in standby mode. - The listed electrical /optical characteristics are only guaranteed under the controller & waveform provided by PVI - Vcom is recommended to be set in the range of assigned value ̈́ 0.1V 6-4 )Panel AC characteristics VDD=3.0V to 3.6V, unless otherwise specified. Parameter Symbol Min. Typ. Max. Unit App Pin Clock frequency fc kv - - 200 kHz Minimum “L” clock pulse width twL 0.5 - - us Clock rise time trc kv - - 100 ns Clock fall time tfc kv - - 100 ns CKV Data setup time tSU 100 - - ns Data hold time tH 100 - - ns CKV, SPV Pulse rise time trspv - - 100 ns Pulse fall time tfspv - - 100 ns SPV Clock CL cycle time tcy 50 - DC ns D0 .. D7, SPH setup time tsu 8 - - ns D0 .. D7, SPH hold time th 1 - - ns LE on delay time tLEdly 40 - - ns LE high-level pulse width tLEw 40 - - ns LE off delay time tLEoff 40 - - ns Below table CLOCK & DATA TIMING LE CL tLE tLEdly tLEoff tOUT OUT1 ~ OUT400
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 OUTPUT LATCH CONTROL SIGNALS CL D0~D7 tcy tsu th SPH tstls tstlh 10% 10% 10% 10% 90% 90% C K V S P V tfckv twl trckv tus trspvtfspv th 6-5) Power Consumption Parameter Symbol Conditions TYP Max Unit R emark Maximum panel power consumption during update. - - - 1850 mW Power consumption in standby mode - - - 0.4 mW Typical panel power - - 850 - mW
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 7.Power on Sequence 1. VSS /barb2right VDD /barb2right VNEG /barb2right VPOS (Source driver) 2. VEE /barb2right VGG(Gate driver) ϠPower on sequence’s timing chart as blew : VSS VDD VPOS VGG VEE V NEG Logic signal input T1:100 µs( min) T2: 0 µs(min) T3: 1000 µs (min ) T6 T7 T4: 0 µs (min) T5: 0 µs (min) T6: 0 µs (min) T7: 0 µs (min) T1 T2 T3 T4
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 ϠIt is expanded as blew. VDD VPOS VNEG VEE VGG Logic signal input Sequence Sequence Sequence Sequence Sequence Sequence
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 8. Optical characteristics 8-1)Specifications Measurements are made with that the illumination is under an angle of 30 degrees, the detection is perpendicular unless otherwise specified. T = 2 5 oC SYMBOL PARAMETER CONDITIONS MIN TYP. MAX UNIT Note R Reflectance White 30 35 - % - Gn N th Grey Level - - DS+(WS-DS)ͪn/(m-1) - L* - CR Contrast Ratio - 6 - - - Tupdate Update time 2~4-bit mode 1-bit mode 1000 540 - ms ms - WS: White state , DS: Dar k state, Gray state from Dark to White :DSΕG1ΕG2…ΕGn…ΕGm-2ΕWS m:4 Ε8Ε16 when 2 Ε3Ε4 bits mode 8-2)Definition of contrast ratio The contrast ratio (CR) is the ratio between the reflectance in a full white area (Rl) and the reflectance in a dark area (Rd): CR = Rl/Rd
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 8-3)Reflection Ratio The reflection ratio is expressed as: R = Reflectance Factor white board x ( L center / Lwhite board ) Lcenter is the luminance measured at center in a white area (R=G=B=1). Lwhite board is the luminance of a standard white board. Both are measured with equivalent illumination source. The viewing angle shall be no more than 2 degrees. α = declination / θ = azimuth
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 9.HANDLING, SAFETY AND ENVIROMENTAL REQUIREMENTS WARNING The display glass may break when it is dropped or bumped on a hard surface. Handle with care. Should the display break, do not touch the electrophoretic material. In case of contact with electrophoretic material, wash with water and soap. CAUTION The display module should not be exposed to harmful gases, such as acid and alkali gases, which corrode electronic components. Disassembling the display module can cause permanent damage and invalidate the warranty agreements. Observe general precautions that are common to handling delicate electronic components. The glass can break and front surfaces can easily be damaged. Moreover the display is sensitive to static electricity and other rough environmental conditions. Data sheet status Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advi sory and does not form part of the specification.
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 10. Reliability test ʳ TEST CONDITION MET HOD REMARK
1 High-Temperature
At the end of the test, electric, mechanical, and optical specifications shall be satisfied.
2 Low-Temperature
Operation T = 0°C for 240 hrs IEC 60 068-2-2Ab At the end of the test, electric, mechanical, and optical specifications shall be satisfied.
3 High-Temperature
T = +70°C, RH=23% for 240 hrs IEC 60 068-2-2Bp At the end of the test, electric, mechanical, and optical specifications shall be satisfied.
4 Low-Temperature
Storage T = -25°C for 240 hrs IEC 60 068-2-1Ab At the end of the test, electric, mechanical, and optical specifications shall be satisfied.
5 High-Temperature,
At the end of the test, electric, mechanical, specifications shall be satisfied. ʳ
6 High Temperature,
T = +50к, RH=80% for 240hrs IEC 60 068-2-3CA At the end of the test, electric, mechanical, specifications shall be satisfied. ʳ
7 Temperature Cycle 1 cycle:[-25к 30min] Ш[+70к 30
min] :100 cycles IEC 60 068-2-14 At the end of the test, electric, mechanical, specifications shall be satisfied. ʳ 8 UV exposure Resistance 765 W/m2 for 168hrs,40к IEC60 068-2-5Sa Optical characteristics shall be satisfied.
9 Package Vibration
1.04G, Frequency: 10~500Hz Direction: X,Y,Z Duration: 1 hours in each direction Full packed for shipment At the end of the test, electric, mechanical, and optical specifications shall be satisfied. Drop from height of 122 cm on concrete surface. Drop sequence: 1 corner, 3 edges, 6 faces One drop for each. Full packed for shipment At the end of the test, electric, mechanical, and optical specifications shall be satisfied.
11 Electrostatic Effect
(non-operating) (Machine model)+/- 250V 0 Ө, 200pF IEC 62179, IEC 62180 At the end of the test, electric, mechanical, specifications shall be satisfied. ʳʳ
12 Altitude test
Operation 700hPa ( = 3000m )48Hr At the end of the test, electric, mechanical, specifications shall be satisfied. ʳʳ
13 Altitude test
Storage 260hPa ( = 10000m )48Hr ʳ At the end of the test, electric, mechanical, specifications shall be satisfied. ʳʳ
14 Stylus Tapping
POLYACETAL Pen: Top R:0.8mm Load: 300gf Speed: 2 times/sec Total 13,500times, Pass criteria – no glass breakage or damage to microcapsules. Actual EMC level to be measured on customer application
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 11. Bar Code definition E0Y 0 0 4 0 1 1 I 7 4 00361 A T 1 2 3 4 2 5 6 2 7 2 8 1 ΚEPD model code: ED050SC3:E0Y 2 ΚInternal control codes: 3 ΚFPL reversion code V100:3,V110:4 4 ΚFPL batch code: 5 ΚYear: 6 ΚMonth: 7 ΚSerial number 8 ΚMFG code: TOC:T, PVI:P
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 12. Border definition 13.Block Diagram ˣ˴́˸˿
33 PIN Input
ʻ˚˴̇˸ʼ
The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 14.Packing