ECS-T1AZ475R PANASONIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Tantalum Solid Electrolytic Capacitors/TES Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. ¾ EE31 ¾ Ta. TES TESSeries: -55 to 125°C 4 to 16 V .DC 0.47 to 15 µ F ±20 % (120Hz/20°C) n Dimensions in mm (not to scale) P (+) (-) L H w 1 n Marking P l Size Z n Case size Surface Mount T ype n Features n Specifications Category temp. range Rated W.V . Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current Moisture Resistance Endurance Capacitance change tand. DC leakage current ±10% of initial measured value < initial specified value < 125 % of initial specified value Please see the attached standard products list the following limits. After 2000 hours application of rated DC working voltage at 85°C or derated voltage at Resistance to Soldering Heat Capacitance change tand. DC leakage current ±10% of initial measured value < initial specified value, miniatured size : < 150% of initial specified value. < initial specified value 4. Other rating upon request (voltage, capacitance, tolerance) tand Low profile Height: H=1.2mm max. L±0.2 W1±0.2 W2±0.1 H max. P EIA code 2012 Size code Z 2.0 Capacitance code 4 6.3 10 16 G J A C W.V . code W.V . (V) code Polarity bar (+ side) W.V .code Cap. code (Ex.) JE : 6.3V 1.5µF Japan China Cap(µF) Standard Miniature Standard Miniature Standard Miniature Standard Miniature Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z 0.47 (474) 0.68 (684) 1.0 (105) 1.5 (155) 2.2 (225) 3.3 (335) 4.7 (475) 6.8 (685) 10 (106) 15 (156) S W A E J N S W A E Capacitance(µF) 1st code I < 0.01CV or 0.5 (µA) after 2 m inutes application of rated working voltage at 20°C (Whichever is greater) W.V . and capacitance code.N ote : 1. ( )indicates 2. When selecting W .V. refer to page 20. 3. W e recommend current sizes shown in the above table for new design, but conventional case size is available on request. The capacitor shall withstand dipping into solder for 5±1 seconds at 260±5°C After 500 hours exposure at 40 °C and 90 to 95 % R.H. without load, the capacitor shall meet 125°C, the capacitor shall meet the following limits. Rev.02/04
Tantalum Solid Electrolytic Capacitors/TES Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. ¾ EE32 ¾ n Standard Products LxWxH (mm) (pcs)(µF) (µA) L.C Case Size Specification Cap. (±20%) W.V. Part No. Min. Packaging Q'ty TapingSize Code 6.3 tan d (120Hz) (20°C) ESR (100kHz) (20°C) (W )