ECS65-130-SERIES XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

1.Safetyapprovalscoverfrequency 47-63 Hz. AC -D C Specification 65/ 100/13 0 Watts

  • IT& Me dicalSafetyApprovals
  • 65/80 /10 0 W - Convection-cooledRatings
  • Class I& ClassIIConstruction
  • IndustryStandard2” x4” Package
  • <0.5 W N o Load InputPower
  • Low Leakage Current
  • 3 YearWa rranty ECS Series Input InputVoltage • 80-264 VAC (275VAC ECS65) (120-370VDC),derateoutputpower <90 VAC, see deratingcurves InputFrequency • 47-400 Hz (1) InputCurrent • 65 W:1.0/0.6A typicalat115/230VAC 100 W:1.5/0.9A typicalat115/230VAC, 130 W:1.9/1.1A typicalat115/230VAC fullload InrushCurrent • 40 A max at230 VAC, coldstartat25 ˚C Power Factor • EN61000-3-2,classA No Load InputPower • <0.5W EarthLeakage Current • 65/130W:260 µA at264 VAC/60 Hz max

100 W:230 µA at264 VAC/60 Hz max

InputProtection • InternalT3.15/T5A/250 V fuseinlineand neutral Ou tput Output Voltage • 12-48 VDC (seetables) Output VoltageTrim • ±10% InitialSet Accuracy • ±1% Minimum Load • No minimum loadrequired StartUp Delay • 1 s typical StartUp RiseTime • 50 ms Hold Up Time • 16 ms min at115 VAC Drift • ±0.2%after20 min warm up LineRegulation • ±0.5%max Load Regulation • ±1% Over/Undershoot • 5% typical TransientResponse • 4% max.deviation,recoverytowithin 1% in500 µs fora 50-75-50% load change Ripple& Noise • 1% pk-pk,20 MHz bandwidth OvervoltageProtection • 115-140% Vnom, recycleinputtoreset OverloadProtection • 110-160% ShortCircuitProtection • Continuoustripand restart(hiccupmode) Temperature • 0.05% /˚C Coefficient xppow er.com Gen eral Efficiency • Up to90% model dependent Isolation • 4000 VAC Input toOutput,2 x MOPP,

1500 VAC Input toGround,1 x MOPP,

500 VDC Output toGround,1 x MOPP

SwitchingFrequency • 65 KHz typical Power Density • 65 W:7.7 W/in 3,100 W:10 W/in 3,

130 W:13 W/in 3

MTBF • 65 W:850 kHrs,100 W:834 kHrs,

130 W:715 kHrs toMIL-HDBK-217F

at25 ˚C,GB Environme ntal OperatingTemperature • -20˚C (-40˚C,ECS130) to+70 ˚C derate linearlyfrom +50 ˚C at2.5%/˚Cto50% loadat+70 ˚C. Cooling • Convection& fancooledrating s(seetables) OperatingHumidity • 95% RH, non-condensing StorageTemperature • -40 ˚C to+85 ˚C OperatingAltitude • 3000 m Shock • 30 g pk,halfsine,6 axes Vibration • 2 g rms,5 Hz to500 Hz, 3 axes EMC & Safety Low VoltagePSU EMC • EN61204-3,highseveritylevel Emissions • EN55011/22 levelB conducted EN55011/22 levelA radiated,levelB Suffix‘-B’models Harmonic Currents • EN61000-3-2,classA VoltageFlicker • EN61000-3-3 RadiatedImmunity • EN61000-4-3,level3 Perf CriteriaA EFT/Burst • EN61000-4-4,level3 Perf CriteriaA Surge • EN61000-4-5,installationclass3 Perf CriteriaA Conducted Immunity • EN61000-4-6,level3 Perf CriteriaA Dips & Interruptions • EN61000-4-11,30% 10 ms,60% 100 ms, 100% 5000 ms,Perf CriteriaA, B,B, EN60601-1-2,30% 500 ms,60% 100 ms, 100% 10 ms,100% 5000 ms,Perf Criteria A, A, A, B -230 VAC. Consultlongform datasheetfor115 V operation. SafetyApprovals • IEC60950-1 CB report,CSA 22.2 No.60950-1,UL60950-1, TUV EN60950-1 IEC60601-1 CB report,CSA 22.2 No.60601-1,ANSI/AMMI ES60601-1, TUV 60601-1,includingriskmanagement Equipment Protection • ClassI &II (ECS65Non ‘-B’models, Class Clas s I only)

0.20 (5.1) 1.05 (26.7) 0.14(3.5) SMDComponent Height 2.00 (50.8) 0.95 (24.1) 0.125 (3.18) 1.75 (44.45) J1 0.96(24.5) 0.20(5.1) 4.00 (101.6)

0.25 Faston GroundTab

4 X ø.156 (3.96)MountingHoles ø.312(7.92) Clearance top and bottom ECS6 5 M odelsand Ratings Mec hanicalDetails DeratingC urve - ECS65 Mode ls Notes 1.A lldim ensions ininches (mm). 2.W eight:0.386 lbs (17 5 g) J1 m ates w ith M olex H ousing PN 09-50-1031,J2 mates with Molex H ousing PN 09 -50-1041 and both withMolex Series 5194 Crim p Terminals Notes InputC onnectorJ1 Molex PN 09-65- 2038 Pin 1 L ine Pin 2 Ne utral 0.25” Faston Earth OutputC onnectorJ2 Molex PN 09-65 -2048 P in 1 +V1 P in 2 +V1 P in 3 R TN P in 4 R TN 1. For C lass B radiated emissions models, add suffix-B to mo delnum ber.For covered versions,add suffix‘-C’to mo delnumber or orderpartno. ECM4 0/60 COVER K ITforstandalone cover. D erateoutputpower by 20% withcover. The coverisnot suitableforClassIIinstallations. O utputPow er O utputVoltage O utputC urrent M odelNu mb er (1) 65 W 12.0VDC 5.4A ECS 65U S12 65 W 15.0VDC 4 .3A ECS 65U S15 65 W 18.5VDC 3.4A ECS 65U S18 65 W 24 .0VDC 2.7A ECS 65U S24 65 W 28.0VDC 2.3A ECS 65U S28 65 W 4 8.0VDC 1.4A ECS 65U S4 8 100 80 90 85 275 Input Voltage (VAC) Output Power (%) 100 -40 -20 50 40 60 Ambient T emperature ( ºC) With Cover Open Frame Some Specification Parameters may not be met Output Power (%)

4.00 (101.6) 4.50 (114.3) 3.75 (95.25) 0.37 (9.52) 1.75 (44.45) 1.01 (25.7) 0.125 (3.18) 0.20 (5.1) 0.10 (2.5) 0.125 (3.18) 2.00 (50.8) 1.00 (25.4) 0.125 (3.18) 0.20 (5.1)

0.25 Faston

4 X ø. 156 (3.96) Mounting Holes ø. 312 (7.92) Clearance top and bottom

0.25 Faston Ground Tab

4 X ø .156 (3.96) Mounting Holes ø. 312 (7.92) Clearance top and bottom 1.01 (25.7) Voltage Adj. 1.750 (44.45) 3.750 (95.25) 0.20 (5.1) 0.20 (5.1) 2.00 (50.8) 1.25 (31.8) 0.14 (3.5) SMD Component Height 1.25 (31.8) 0.14 (3.5) SMD Component Height 1.00 (25.4) ECS 100 M odelsand Ratings Mec hanicalDetails DeratingC urve - ECS100 M odels Notes 1.A lldimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); 2.W eight:0.386 lbs(17 5 g) J1 m ateswithMo lex H ousing P N 09 -50-1031,J2 ma tes with Mo lex H ousing PN 09 -50-104 1 and both withMo lex Series 519 4 Crimp Term inals Notes InputC onnectorJ1 Molex PN 09-65 -203 8 P in 1 L ine P in 2 N eutral 0.25” Faston Earth Ou tputC onnectorJ2 M olex PN 09- 65 -2048 P in 1 +V1 P in 2 +V1 P in 3 R TN P in 4 R TN 1. ForC lass B radiated em issions m odels,add suffix-B to mo delnum ber. For covered versions,add suffix‘-C’to model num ber or orderpartno. ECM4 0/60 COVER K IT forstandalone cover. D erateoutputpower by 20% withcover. The cover is not suitableforClassIIinstallations.‘-C’not available for‘-B’ mo dels. O utputPowe r Ou tputVoltage OutputC urrent Mod elNu mbe r (1) Forced Coo led(10 CF M) C onvection-c ooled 100 W 80 W 12.0VDC 8.3 A ECS 100U S12 100 W 80 W 15.0VDC 6.7 A ECS 100U S15 100 W 80 W 18.0VDC 5.5 A ECS 100U S18 100 W 80 W 24 .0VDC 4 .2 A ECS 100U S24 100 W 80 W 28.0VDC 3.6 A ECS 100U S28 100 W 80 W 4 8.0VDC 2.1 A ECS 100U S4 8 +70 100 -20 +50 +40 +60 Ambient Temperature (º C) Output Power (W) 100 80 90 85 264 Input Voltage (VAC) Output Power (%) Force-cooled >10 CFM Convection-cooled Convection-cooled with cover ‘-B’ Model

ECS13 0 M odelsand Ratings SMD COMPONENT HEIGHT 4X □ .156 (3.96) MOUNTING HOLES □ .312 (7.92) CLEARANCE TOP AND BOTTOM 3.750 (95.25) 4.00 (101.6) 0.15 (3.8) 0.125 (3.17) 0.20 (5.1) 0.20 (5.1) .25 FASTON GROUND TAB J1 1.75 (44.45) 0.12 (3.18) 2.00 (50.8) Voltage Adjust 1.28 (32.5) N L Mec hanicalDetails DeratingC urve - ECS130 M odels Notes 1.A lldimensions in inches (mm). 2.W eight:0.386 lbs (175 g) J1 mates withMo lexHo using PN 09-50-1031,J2 mates w ithMo lexHousing PN 09-50-1041 and bothw ithMolex Series 519 4 C rimp Terminals Notes InputC onnectorJ1 M olex PN 09-65 -203 8 Pin 1 L ine Pin 2 Ne utral 0.25” Faston Earth Ou tputC onnector J2 M olex PN 09-65 -2048 P in1 +V1 P in2 +V1 P in3 R TN P in4 R TN 1. Forcovered versions, add suffix ‘-C’ to m odelnum ber or orderpartno. ECM40/60 COVER KIT forstandalonecover, see deratingcurve. The coverisnotsuitable forC lassIIinstallations.‘-C’. O utputPowe r O utputVoltage O utputC urrent M odelNu mbe r (1) Forced C ooled (10 C FM) Conv ection-c ooled 130 W 100 W 12.0VDC 10.9A ECS 130U S12 130 W 100 W 15.0VDC 8.7A ECS 130U S15 130 W 100 W 18.0VDC 7 .3A ECS 130U S18 130 W 100 W 24 .0VDC 5.4A ECS 130U S24 130 W 100 W 28.0VDC 4 .7A ECS 130U S28 130 W 100 W 4 8.0VDC 2.7A ECS 130U S4 8 Ambient Temperature (º C) Output Power (W) 100 110 120 130 80 100 90 264 Input Voltage (VAC) Output Power (W) Forced-cooled >10 CFM Convection-cooled Convection-cooled with cover 100 110 120 130 -40 0-20 60 50 70 Forced-cooled >10 CFM Convection-cooled Convection-cooled with cover Some specification parame ters may not be met

Therma lC onsiderations - AllMod els Covered Version(notavailableforECS100-B Models) Notes 1.A lldim ensions in inches (mm). 2.W eight:0.8lbs(360 g) In ordertoensuresafeand reliableoperation ofthePS U inthemo stadverseconditionspermittedintheend-useequipment,thetempe ratureofthecomponents listed in thetablebelow must notbe exceeded.See mechanicaldraw ingforcomponent locations.Temper atureshouldbe mo nitored using K typethermocouples placed on thehottestpartofthe compo nent(outofany directairflow). Tem perature Me asureme nts(Amb ient≤ 50 °C) Co mp onent Ma x Temp erature °C T1 110 °C C5 100 °C C4 100 °C Q1 110 °C Input Connector Output Connector 0.25 (0.6) Ground Faston Terminal 4.49 (114.0) 2.52 (64.0) 1.54 (39.0) 2 x M3 x 0.5 THD 0.16 (4.0) Max Screw Penetration 0.807 (20.50) 4.055 (103.00) 0.22 (5.5) 0.79 (20.0) 4 x M3 x 0.5 THD 0.16 (4.0) Max Screw Penetration 4.055 (103.00) 0.984 (25.00) 0.22 (5.5) AC -D C ECS 65/ 100/ 130 Mec hanicalDetails 30- M ay-14