ECS100

ECS100 XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

• IT & Medical Safety Approvals
• <0.5 W Standby Power
• High Power Density 10 W/in
• 80/100 W Convection & Force-cooled Ratings
• Class I & Class II Installations
• Industry Standard 2.0” x 4.0” x 1.25” Format
• Class B Radiated Emissions (‘-B’ Models)
• Low Earth Leakage Current
• 3 Year Warranty The ECS100 Series has been designed to minimise the no load power consumption (<0.5 W) and maximise efficiency in order to facilitate equipment design to the latest environmental legislation. Approved for Class I and Class II applications, the ECS100 range of single output AC-DC, 100 W power supplies feature high power supplies meet EN55022 Level B emissions with low earth leakage currents of 100 µA at 115 VAC or 215 µA at 230 VAC. Making these switchers ideal for industrial, IT and medical applications. The ECS100 series has single output versions from 12 V to 48 VDC, adjustable by ±10%. They are dual-fused for compliance with IEC60601-1 and efficiency is 88% typical, so minimal excess heat is generated. The ECS100 require only 10 CFM of cooling to delivers a full 100 W of power up to +50 °C and operates at up to +70 °C with derating or equallly supply 80 W when convection- cooled up to +50 ˚C with operation to +70 ˚C with derating.

xppow er.com Input C haracteristics C haracteristic M inim um Typical M axim um U nits N otes & C onditions Input Voltage - O perating 80 115/230 264 VAC D erate output pow er < 90 VAC . See fig. 1 Input Frequency 47 50/60 400 Hz Agency approval 47 -63 Hz P ow er Factor >0.5 230 VAC , 100% load E N61000-3-2 class A com pliant Input C urrent - No Load 0.02/0.04 A 115/230 VAC Input C urrent - Full Load 1.5/0.9 A 115/230 VAC Inrush C urrent 40 A 230 VAC cold start, 25 ºC No Load Input P ow er 0.3/0.4 0.5 W 115/230 VAC E arth Leakage C urrent 100/215 230 µA 115/230 VAC /50 Hz (Typ.), 264 VAC /60 Hz (M ax.) 0.5/1.1 m A 115/230 VAC /400 Hz Input P rotection T3.15A/250 V internal fuse in both line and neutral O utput C haracteristics C haracteristic M inim um Typical M axim um U nits N otes & C onditions O utput Voltage - V1 12 48 VD C See M odels and R atings table Initial Set Accuracy ±1 % 50% load, 115/230 VAC O utput Voltage Adjustm ent ±10 % Via potentiom eter. See m ech. details (page 9) M inim um Load 0A Start U p D elay 1s 230 VAC full load (see fig.2) Hold U p Tim e 16 m s 115 VAC full load (see fig.3) D rift ±0.2 % After 20 m in w arm up Line R egulation ±0.5 % 90-264 VAC Load R egulation ±1 % 0-100% load. Transient R esponse - V1 4% R ecovery w ithin 1% in less than 500 µs for a 50-7 5% and 7 5-50% load step O ver/U ndershoot - V1 5% See fig.4 R ipple & Noise 1 % pk-pk 20 M Hz bandw idth (see fig.5 & 6) O vervoltage P rotection 115 140 % Vnom D C . O verload P rotection 110 150 % I nom Auto reset (see fig.7 ) Short C ircuit P rotection C ontinuous, trip & restart (hiccup m ode) Tem perature C oefficient 0.05 % /˚C O vertem perature P rotection °C Not fitted M odels and R atings - C onvection-cooled N otes: 1 . For C lass B radiated em issions m odels, add suffix -B to m odel num ber. For covered versions, add suffix ‘-C ’ to m odel num ber or order part no. EC M 4 0/60 C O VER for standalone cover. D erate output pow er by 2 0% w ith cover. The cover is not suitable for C lass II installations. O utput Pow er O utput Voltage V1 M ax O utput C urrent M odel N um ber (1) Forced C ooled (10 C FM ) C onvection C ooled 100 W 80 W 12.0 VD C 8.3 A E C S100U S12 100 W 80 W 15.0 VD C 6.7 A E C S100U S15 100 W 80 W 18.0 VD C 5.5 A E C S100U S18 100 W 80 W 24.0 VD C 4.2 A E C S100U S24 100 W 80 W 28.0 VD C 3.6 A E C S100U S28 100 W 80 W 48.0 VD C 2.1 A E C S100U S48

xppow er.com Xxxxxxxxxx G eneral Specifications C haracteristic M inim um Typical M axim um U nits N otes & C onditions E fficiency 88 % Full load (see fig.8 & 9 ) Isolation: Input to O utput Input to G round O utput to G round

4000 VAC

1500 VAC

500 VD C

Sw itching Frequency 65 kHz P ow er D ensity 10 W /in 3 M ean Tim e Betw een Failure 834 kHrs M IL-HD BK -217 F , Notice 2 +25 °C G B

1245 Telecordia SR -332 +25 ºC

W eight 0.4 (17 5) lb (g) Efficiency Versus Load 81.00% 82.00% 83.00% 84.00% 85.00% 86.00% 87.00% 88.00% 89.00% 0 2 0 4 0 6 0 8 0 1 0 0 Efficiency Output Load Wattage (W) E 83.00% 84.00% 85.00% 86.00% 87.00% 88.00% 89.00% 90.00% 91.00% 0 2 0 4 0 6 0 8 0 1 0 0 Efficiency (%) Output Load Wattage (W) E y at 230V AC Input Figure 8 EC S10 0 U S12 at 2 30 VA C Figure 9 EC S10 0 U S2 4 at 2 30 VA C

xppow er.com Xxxxxxxxxx Environm ental C haracteristic M inim um Typical M axim um U nits N otes & C onditions O perating Tem perature -20 +7 0 ºC D erate linearly from +50 ºC at 2.5% /ºC to 50% at 7 0 ºC . (See fig.10 & Therm al C onsiderations) Storage Tem perature -40 +85 ºC C ooling 10 C FM >80 W output pow er. See fig.10 & Therm al C onsiderations Hum idity 5 95 % R H Non-condensing O perating Altitude 3000 m Shock 3 x 30 g/11 m s shocks in both +ve & -ve directions along the 3 orthogonal axis, total 18 shocks. Vibration Three axis 5-500 Hz at 2 g x 10 sw eeps Electrom agnetic C om patibility - Im m unity Phenom enon Standard Test Level C riteria N otes & C onditions Low Voltage P SU E M C E N61204-3 High severity level as below Harm onic C urrent E N61000-3-2 C lass A ESD Im m unity EN 61 000-4 -2 ±6 kV C ontact ±1 5 kV Air D ischarge A R adiated E N61000-4-3 3A E FT E N61000-4-4 3A Surges E N61000-4-5 Installation class 3 A C onducted E N61000-4-6 3A D ips and Interruptions E N61000-4-11 D ip: 30% 10 m s A D ip: 60% 100 m s B D ip: 100% 5000 m s B E N60601-1-2 D ip: 30% 500 m s A D ip: 60% 100 m s A Load derating w ith 115 VAC input (typically 50% derate dependant on m odel & load) D ip: 100% 10 m s A Int.: >95% 5000 m s B Figure 10 D erating C urve +70 100 -20 +50 +40 +60 Ambient Temperature (ºC) Output Power (W) Force-cooled >10 CFM Convection-cooled Convection-cooled with cover

xppow er.com Electrom agnetic C om patibility - Em issions Phenom enon Standard Test Level C riteria N otes & C onditions C onducted E N55011/22 C lass B See fig. 11 R adiated E N55011/22 C lass A C lass B E C S100-B M odels Voltage Fluctuations E N61000-3-3 Safety A gency A pprovals Figure 11 Typical conducted noise plot (C lass I) Typical EM C Plot Safety A gency Safety Standard C ategory C B R eport U L U S/137 28/U L IE C 60950-1:2005 E d 2 Inform ation Technology U L U L File # 139109 U L60950-1 (2007 ), C SA 22.2 No.60950-1-07 E d 2 Inform ation Technology TU V TU V C ertificate # B 09 04 57 396 059, E N60950-1:2006 Inform ation Technology C E LVD Safety A gency Safety Standard C ategory C B R eport IE C 60601-1 E d 3 Including R isk M anagem ent M edical U L U L File # E 146893, ANSI/AAM I E S 60601-1:2005 & C SA C 22.2 No. 60601-1:08 M edical TU V E N60601-1:2006 M edical Equipm ent Protection C lass Safety Standard N otes & C onditions C lass I & C lass II IE C 60950-1:2005 E d 2 & IE C 60601-1 E d 3 See safety agency conditions of acceptability for details M eans of Protection C ategory P rim ary to Secondary 2 x M O P P (M eans of P atient P rotection) IE C 60601-1 E d 3 P rim ary to E arth 1 x M O P P (M eans of P atient P rotection) Secondary to E arth 1 x M O P P (M eans of P atient P rotection)

‘-B ’ M odel xppow er.com N otes 1. All dim ensions in inches (m m ). 2. W eight: 0.4 lbs (17 5 g) (O pen Fram e) 4.00 (101.6) 0.125 (3.18) 1.00 (25. 4) 0.125 (3.18) 0.20 (5.1)

0.25 Faston

4 X ø.156 (3.96) Mounting Holes ø.312 (7.92) Clearance top and bottom 1.01 (25.7) Voltage Adj. 1.750 (44.45) 3.750 (95.25) I 0.20 (5.1) 2.00 +0.06/-0.00 (50. 8 +1.5/-0.00) 1.25 (31.8) 0.14 (3.5) SMD Component Height 4.50 (114.3) 3.75 (95.25) 0.37 (9.52) 1.75 (44.45) 1.01 (25. 7) 0.125 (3.18) 0.20 (5. 1) 0.10 (2.5)

0.25 Faston Ground Tab

4 X ø.156 (3.96) Mounting Holes ø.312 (7.92) Clearance top and bottom 0.20 (5.1) 2.00 +0.06/-0.00 (50. 8 +1.5/-0.00) 1.25 (31.8) 0.14 (3.5) SMD Component Height 1.00 (25. 4) J1 m ates w ith M olex Housing P N 09-50-1031, J2 m ates w ith M olex Housing P N 09-50-1041 and both w ith M olex Series 5194 C rim p Term inals In put C onnector J1 M olex PN 0 9-65-2 0 38 P in 1 Line P in 2 Neutral 0.25” Faston E arth O utput C onnector J2 M olex PN 0 9-65-2 0 48 P in 1 +V1 P in 2 +V1 P in 3 RTN P in 4 RTN

In order to ensure safe operation of the PSU in the most adverse conditions permitted in the end-use equipment, the temperature of the components listed in the table below must not be exceeded. See drawing on page 9 for component locations. Temperature should be monitored using K type thermocouples placed on the hottest part of the component (out of any direct air flow). Tem perature M easurem ents (A m bient ≤ 50 ºC ) C om ponent M ax Tem perature ºC T1 110 ºC C 5 100 ºC C 4 100 ºC Q 1 110 ºC xppow er.com C overed Versions -C (not available for -B m odels) Input Connector Output Connector 0.25 (0.6) Gr ound Faston T erminal 4.49 (114.0) 2.52 (64.0) 1.54 (39.0) 2 x M3 x 0.5 THD 0.16 (4.0) Max Scr ew Penetration 0.807 (20.50) 4.055 (103.00) 0.22 (5.5) 0.79 (20.0) 4 x M3 x 0.5 THD 0.16 (4.0) Max Scr ew Penetration 4.055 (103.00) 0.984 (25.00) 0.22 (5.5) N otes 1. All dim ensions in inches (m m ). 2. W eight: 0.4 lbs (17 5 g) (O pen Fram e) J1 m ates w ith M olex Housing P N 09-50-1031, J2 m ates w ith M olex Housing P N 09-50-1041 and both w ith M olex Series 5194 C rim p Term inals In put C onnector J1 M olex PN 0 9-65-2 0 38 P in 1 Line P in 2 Neutral 0.25” Faston E arth O utput C onnector J2 M olex PN 0 9-65-2 0 48 P in 1 +V1 P in 2 +V1 P in 3 RTN P in 4 RTN