ECP60UD01 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
60 Watts
- Low ProfileDesign
- Co mp actSize,4 ” x 2”
- IT& Me dicalApprovals
- Single,Du aland TripleOutput
- <0.5W No Load InputPower
- Peak Load Cap ability
- 3 YearWa rranty ECP Series Input InputVoltage • 85-264 VAC,deratefrom 100% loadat
90 VAC to90% loadat85 VAC
InputFrequency • 47-63 Hz InputCurrent • 0.85A max at115 VAC InrushCurrent • 100 A max at230 VAC,coldstartat25 °C Power Factor • EN61000-3-2,classA No Load InputPower • <0.5 W EarthLeakage Current • <250 µA at264 VAC,60 Hz InputProtection • InternalT2 A/250 V fuseinboth lineand neutral Output Output Voltage • See table Output VoltageTrim • ±10% on V1 only,output2 on multioutput models willtrackby thesame percentage Minimum Load • 10% minimum loadrequiredon all outputsofmultioutputmodels StartUp Delay • 1.3s max StartUp RiseTime • 15 ms typical Hold Up Time • 16 ms min atfullloadat115 VAC TotalRegulation • Output1:2% from 0% loadto100% load Output2: 5% from20% loadto100% load Output3:5% from10% loadto100% load Remote Sense • FittedtoUS05 version,compensates for
0.5 V drop
TransientResponse • 4% max deviation,recoveringtolessthan 1% within500 µs for50% stepload change at1 A/µs Ripple& Noise • 1% pk-pk (2% forUS05 version), measured with20 MHz bandwidth OvervoltageProtection • 115-140% ofnominaloutputvoltage on V1 only,recycleinputtoreset OverloadProtection • 120-160% ofnominalpower ShortCircuitProtection • Tripand restart(hiccupmode) Temperature • ±0.02% /°C max Coefficient xppow er.com Ge neral Efficiency • 88%typicalat230 VAC and fullload Isolation • 4000 VAC InputtoOutput
1500 VAC InputtoGround
500 VDC OutputtoGround
SwitchingFrequency • 30-130kHz variable MTBF • >400 kHrstoMIL-HDBK-217F at25 °C,GB Environm ental OperatingTemperature • -20 °C to+70 °C,deratefrom 100% load at50 °C to50% loadat70 °C Cooling • Naturalconvection OperatingHumidity • 5% to95% RH,non condensing OperatingAltitude • 3000 m max StorageTemperature • -40°C to+85 °C Shock • 30 g pk,halfsine,6 axes Vibration • 2 g rms,5 Hz to500 Hz,3 axes EMC & Safety Emissions • EN55011/22, levelB conducted & levelA radiated Harmonic Currents • EN61000-3-2,classA VoltageFlicker • EN61000-3-3 ESD Immunity • EN61000-4-2,±4 kV indirectcontact, PerfCriteriaA RadiatedImmunity • EN61000-4-3,3 V/m,PerfCriteriaA EFT / Burst • EN61000-4-4,level3 PerfCriteriaA Surge • EN61000-4-5,installationclass3, PerfCriteriaA Conducted Immunity • EN61000-4-6,3 V PerfCriteriaA Dips & Interruptions • EN61000-4-11,30% 10 ms,60% 100 ms, 100% 5000 ms,PerfCriteriaA,B,B EN60601-1-2,30% 500 ms,60% 100 ms, 100% 10 ms,100% 5000 ms, PerfCriteriaA,A,A,B SafetyApprovals • EN60950-1,cUL60950-1,IEC60950-1, EN60601-1,ANSI/AAMI ES60601-1, CSA22.2 No.60601-1IncludingRisk Management,IEC60601-1
O utput1 O utput2 O utput3 M odelN umbe r Voltage C urrent Peak (1) Voltage C urrent Peak (1 ) Voltage C urrent 5 5 W +5.0 VDC 11.0 A 14.3A EC P60US 05 1.Alldim ensions arein inches (mm). 2. We ight:0.34lbs (15 5 g)approx. 3.Tolerance:±0.02 (±0.5 )unless stated 1. Pe ak load lasting <30 s w ith a maxim um duty cycleof 10%, average output power no tto exceed nominal. Notes Notes CN 1 -InputC onnector Pin 1 N eutral Pin 2 N otFitted Pin 3 Line CN 2 O utputC onnector UD/ UT U S05 Pin1 V3 RTN Pin2 RTN RTN Pin3 RTN RTN Pin4 V1 +5 V Pin5 V1 +5 V Pin6 V2 +5 V Mo unting holes ma rked with mus tbe connectedtosafetyearth Mates withJS T housing VH R-6N and JS T Series SVH -21T-P1.1crimp terminals C N3 Sense Co nnector Pin 1 -Sense Pin 2 +Sense Fitted toECP 60U S05 only.Ma tes withM olex Ho using 2 2 -01-1022 and 275 9 crimp terminals Mates w ithJS T housing VHR-3N and JS T Series SVH-2 1T-P1.1crimpterminals
1 CN3
4.00 (101.6) 1.04 (26.3) 1.20 (30.4) 2.00 (50.8) 1.75 (44.4) 1.75 (44.4) CN2 CN1 Voltage Adj. 3.75 (95.2) UD/UT US05 Mounting holes need to be isolat ed from ground -10 -20 0 10 20 30 40 50 60 70 100 Ambient Temperature (ºC) Output Power (%)