ECP XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
20 Watts
- Low Profile,0.73”
- Class IICo nstruction
- PCB Mo unting
- SingleOu tputsfrom 3.3to 48 V
- Du alOu tputsfrom 12 to 24 V
- <0.3W No Load InputPower
- 3 YearWa rranty ECP Series Input InputVoltage • 85-264 VAC (120-370VDC) InputFrequency • 47-63 Hz InputCurrent • 0.5A max at115 VAC InrushCurrent • 40 A max at230 VAC, coldstart25 °C EarthLeakage Current • ClassIIconstruction,no earth Power Factor • Conforms toEN61000-3-2, ClassA No Load InputPower • <0.3 W InputProtection • T1A /250 VAC fuseinline Output Output Voltage • See table InitialSet Accuracy • ±1% at60% load Minimum Load • 10% on dualoutputmodels only StartUp Delay • 1.3 s max StartUp RiseTime • 15 ms typical Hold Up Time • 10 ms min atfullload& 115 VAC LineRegulation • ±0.5% max Load Regulation • ±1.0% max (singleoutputmodels) ±2.0% max (dualoutputmodels) Cross Regulation • Dual outputmodels:3% on one outputwhen theotherisvariedfrom 10%-100% load TransientResponse • 4% max deviation,recoveringtolessthan 1% within500µs for50% stepload change at1 A/µs Ripple& Noise • 3.3& 5 V versions:50 mV, 1% forothers measured with20 MHz bandwidth OvervoltageProtection • 110-140% ofnominaloutputvoltage OverloadProtection • 150-180% offullloadcurrent ShortCircuitProtection • Tripand restart(hiccupmode) Peak Load • See table Temperature • ±0.02% /°C max Coefficient xppow er.com Ge neral Efficiency • See tables Isolation • 3000 VAC InputtoOutput SwitchingFrequency • 100 kHz typical Power Density • 6.80 W/in 3 MTBF • >400 kHrs toMIL-HDBK-217F at25 °C,GB Environm ental OperatingTemperature • -10 °C to+70°C,deratefrom 100% load at50 °C to50% loadat70°C Cooling • Naturalconvection OperatingHumidity • 5% to90% RH, non-condensing StorageTemperature • -40 °C to+90°C Shock • 30 g,halfsine,6 axes Vibration • 5 to50 Hz, accelerated7.35m/s each x,y,z axes Altitude • 3000 m EMC & Safety Emissions • EN55022, levelB conducted & radiated Harmonic Currents • EN61000-3-2, classA VoltageFlicker • EN61000-3-3 ESD Immunity • EN61000-4-2, ±4 kV couplingplate discharge,PerfCriteriaA RadiatedImmunity • EN61000-4-3, level2,PerfCriteriaA EFT / Burst • EN61000-4-4, level2 PerfCriteriaA Surge • EN61000-4-5, installationclass3, PerfCriteriaA Conducted Immunity • EN61000-4-6, level2,PerfCriteriaA Magnetic Field • EN61000-4-8, 1 A/m, PerfCriteriaA Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, PerfCriteriaA, B, B SafetyApprovals • EN60950-1, cUL60950, IEC60950-1
0.79 (20) 0.157 (4.0) 0.1 (2.5) 1.57 (40) 2.64 (67) MaximumComponent depth: 0.10 (2.60) 2.44(62) 0.492 (12.50) 0.45 (11.50) 0.45 (11.50) 0.15 (3.80) 0.12 (3) 0.55 (14) 0.06(1.60) ø 0.080(ø2.00) ø 0.040(ø1.00) Mec hanicalDetails M odels and Ratings Output Power Output 1 Output 2 Efficiency (2) Model Number Voltage Current Peak (1) Voltage Current Peak (1) 13.2 W 3.3VDC 4.0 A 5.20A 75% ECP20US03 20 W 5.0VDC 4.0 A 5.20A 80% ECP20US05 20 W 9.0VDC 2.23A 2.90A 82% ECP20US09 20 W 12.0 VDC 1.67 A 2.17A 84% ECP20US12 20 W 15.0 VDC 1.34 A 1.74 A 84% ECP20US15 20 W 24.0 VDC 0.84 A 1.09 A 85% ECP20US24 20 W 30.0VDC 0.67A 0.87A 86% ECP20US30 20 W 48.0 VDC 0.42 A 0.55 A 87% ECP20US48 1. Alldim ensions arein inches (mm). 2.We ight:0.105 lbs(4 5 g) 3.Tolerance:±0.02(±0.05) Notes 1.Pe ak load lasting <30 s w ith a maxim um duty cycleof 10%, average outputpower notto exceed nominal. 2.Efficiency is m easured at230 VAC Input,25 °C and fullload. Notes Pin EC P20U S EC P20U D