ECP20US03 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
20 Watts
- Low Profile, 0.73”
- Class II Construction
- PCB Mounting
- Single Outputs from 3.3 to 48 V
- Dual Outputs from 12 to 24 V
- <0.3 W No Load Input Power
- Peak Load Capability ECP20 Series Input Input Voltage • 85-264 VAC Input Frequency • 47-63 Hz Input Current • 0.5 A max at 115 VAC Inrush Current • 40 A max at 230 VAC Power Factor • Conforms to EN61000-3-2, Class A No Load Input Power • <0.3 W Output Output Voltage • See table Initial Set Accuracy• ±1% at 60% load Minimum Load • No minimum load required Start Up Delay • 1.3 s max Start Up Rise Time • 15 ms typical Hold Up Time • 10 ms min at full load & 115 VAC Line Regulation • ±0.5% max Load Regulation • ±1.0% max Transient Response • 4% max deviation, recovering to less than 1% within 500us for 50% step load change at 1 A/µs Ripple & Noise • 3.3 & 5 V versions: 50 mV, 1% for others measured with 20 MHz BW Overvoltage Protection• 110-140% of nominal output voltage Overload Protection • 150-180% of full load current Short Circuit Protection• Trip and restart (Hiccup mode) Temperature • 0.02%/°C max Coefficient xppower.com General Efficiency • See tables Isolation • 3000 VAC Input to Output Switching Frequency • 65 kHz typical Environmental Operating Temperature• 0 °C to +70 °C, derate from 100% load at 50 °C to 50% load at 70 °C Cooling • Natural convection Operating Humidity • 5% to 95% RH, non condensing Storage Temperature • -40 °C to +85 °C Shock • 30g, half sine, 6 axis Vibration • 5-50 Hz, 2g 15 mins/sweep, 30 mins for each of 3 axes EMC & Safety Emissions • EN55022, level B conducted & radiated Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, ±4 kV indirect contact, Perf Criteria A Radiated Immunity • EN61000-4-3, 3 V/m, Perf Criteria A EFT / Burst • EN61000-4-4, level 2 Perf Criteria A Surge • EN61000-4-5, level 2 Perf Criteria A Conducted Immunity • EN61000-4-6, 3 V Perf Criteria A Dips & Interruptions• EN61000-4-11, 70% UT 10ms, 40% UT 100ms, <5% UT 5000ms, Perf Criteria A, B, B Safety Approvals • EN60950, cUL60950, IEC60950-1
0.79 (20) 0.157 (4.0) 0.1 (2.5) 1.57 (40) 2.64 (67) 2.44 (62) 0.492 (12.50)2 0.45 (11.50) 0.45 (11.50) 0.15 (3.80) 0.12 (3) 0.55 (14) 0.06 (1.60) 0.10 (2.60) ø 0.080 (ø2.00) ø 0.040 (ø1.00) Mechanical Details Models and Ratings Output Power Output 1 Output 2 Efficiency Model Number (2) Voltage Current Peak (1) Voltage Current Peak (1) 13.2 W 3.3 VDC 4.0 A 5.20 A 75% ECP20US03 20 W 5.0 VDC 4.0 A 5.20 A 80% ECP20US05 20 W 9.0 VDC 2.23 A 2.90 A 82% ECP20US09 20 W 12.0 VDC 1.67 A 2.17 A 84% ECP20US12 20 W 15.0 VDC 1.34 A 1.74 A 84% ECP20US15 20 W 24.0 VDC 0.84 A 1.09 A 85% ECP20US24 20 W 30.0 VDC 0.67 A 0.87 A 86% ECP20US30 20 W 48.0 VDC 0.42 A 0.55 A 87% ECP20US48 1. All measurements are in inches (mm). 2. Weight: 40g approx. Notes 1. Peak load lasting <30 s with a maxiumum duty cycle of 10%, average output power not to exceed nominal. Notes Pin ECP20US ECP20UD