ECP130 XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

The ECP130 series is designed to minimize the no load power consumption and maximize efficiency to facilitate equipment design to meet the latest environmental legislation. Approved for medical and ITE applications, this range of single output AC-DC power supplies are packaged in a low profile 1.1” height with a foot print of just 2” by 3”. The ECP130 provides up to 130 W force-cooled or 100 W convection-cooled leading to very high power densities of 19.7 W/in 3 or 15.1 W/in 3 respectively. The power supply contains two fuses and low leakage currents as required by medical applications and is safety approved to operate in a 80 °C ambient. The low profile and safety approvals covering ITE and medical standards along with conducted emissions to EN55011/22 level B allow the versatile ECP130 series to be used in a vast range of applications.

  • 100 W Convection/130 W Forced-cooled Ratings
  • 2” by 3” Footprint
  • Low 1.1” Profile
  • High Efficiency, up to 95%
  • Medical and ITE Approvals
  • High Power Density
  • Less than 0.5 W No Load Input Power
  • 3 Year Warranty Dimensions: ECP130: w w w .xppow er.com 1 Models & Ratings N otes 1. R equires 10 C FM . 2. T ypical efficiency m easured at full load and 230VAC input. 3. Add suffix ‘-S’ for input and output screw term inals e.g. EC P130PS24-S ECP130 Series AC -D C Pow er Supplies

130 Watts

O utput C urrent Efficiency (2) M odel N um ber (3) C onvection-cooled Forced-cooled (1) 13 0 W 12.0 V 8.3 3 A 10.83 A 9 3 % EC P13 0PS12 13 0 W 15.0 V 6 .6 6 A 8.6 6 A 9 3 % EC P13 0PS15 13 0 W 18.0 V 5.55 A 7 .22 A 9 3 % EC P13 0PS18 13 0 W 24.0 V 4.16 A 5.41 A 9 3 % EC P13 0PS24 13 0 W 28.0 V 3 .57 A 4.6 4 A 9 3 % EC P13 0PS28 13 0 W 3 6 .0 V 2.7 7 A 3 .6 1 A 9 3 % EC P13 0PS3 6 13 0 W 48.0 V 2.08 A 2.7 0 A 9 3 % EC P13 0PS48 Summary C haracteristic M inim um Typical M axim um U nits N otes & C onditions Input R ange 85 115/23 0 26 4 VA C Derate load from 100% at 9 0 VA C to 85% at 85 VA C N o L oad Input Pow er 0.5 W Efficiency 9 5 % 23 0 VA C (see fig.1 & 2) O perating T em perature -3 0 +80 °C See derating curve (fig.3 ) Safety A pprovals ITE IEC 6 0950, U L6 0950- 1, C SA 22.2 N o.6 0950- 1- 11 Ed 2, EN 6 0950- 1, LVD M edical IEC 6 06 01- 1 Ed 3.1 Including R isk M anagem ent, AN SI/AAM I ES6 06 01- 1 & C SA C 22.2 N o.6 06 1- 1:08, EN 6 06 01- 1

C haracteristic M inim um Typical M axim um U nits N otes & C onditions O utput Voltage 12 48 VDC See M odels and R atings table Initial Set A ccuracy ±1 % 50% load, 115/23 0 VA C O utput Voltage A djustm ent % N one M inim um L oad 0A N o m inim um load required Start U p Delay 2s 115/23 0 VA C full load. H old U p Tim e 10 15/11 m s M in at full load, 115 VA C . T ypical at 100W / 13 0W Drift ±0.02 % A fter 20 m in w arm up L ine R egulation ±0.5 % 9 0-26 4 VA C L oad R egulation ±0.5 % 0-100% load. T ransient R esponse 4% R ecovery w ithin 1% in less than 500 µs for a 50-7 5% and 7 5-50% load step O ver/U ndershoot 7% Full load R ipple & N oise 1 % pk-pk <2% from no load to 10% load, <1% above 10% load.

20 M H z bandw idth and 10 µF electrolytic capacitator in

parallel w ith 0.1 µF ceram ic capacitator. O vervoltage Protection 110 140 % Vnom , recycle input to reset O verload Protection 110 17 0 % I nom Short C ircuit Protection T rip & R estart T em perature C oefficient 0.02 % /˚C ECP130 Series w w w .xppow er.com 2 AC -D C Pow er Supplies General C haracteristic M inim um Typical M axim um U nits N otes & C onditions Efficiency 9 5 % 23 0 VA C (see fig. 1 & 2) Isolation: Input to O utput Input to G round O utput to G round

4000 VA C 2 M O PP

1500 VA C 1 M O PP

50 13 5 kH z M ain converter Pow er Density 19 .7 /15.1 W /in 3 Forced/convection-cooled M ean Tim e Betw een Failure 6 80 kH rs M IL -H DBK -217 F , N otice 2 +25 °C G B W eight 0.43 (19 5) lb(g) C haracteristic M inim um Typical M axim um U nits N otes & C onditions Input Voltage - O perating 85 115/23 0 26 4 VA C Derate output from 100% at 9 0 VA C to 85% at 85 VA C Input Frequency 47 50/6 0 6 3 H z A gency approval, 47 -6 3 H z Pow er Factor 0.8 23 0 VA C , 100% load EN 6 1000-3 -2 class A Input C urrent - Full L oad 1.3 /0.6 5 A 115/23 0 VA C Inrush C urrent 120 A 23 0 VA C cold start, 25 ºC Earth L eakage C urrent 20/40 50 µA 115/23 0 VA C /50 H z (T yp), 26 4 VA C /6 0 H z (M ax) N o load Input Pow er 0.5 W Input Protection F3 .15 A /250 V Internal fuse fitted in line and neutral.

C haracteristic M inim um Typical M axim um U nits N otes & C onditions O perating T em perature -3 0 +80 °C See derating curve, fig.3 Storage T em perature -40 +85 °C C ooling 10 C FM Forced-cooled > 100W H um idity 5 9 5 % R H N on-condensing O perating A ltitude 5000 m Shock ±3 x 3 0g shocks in each plane, total 18 shocks. 3 0g = 11m s (+/- 0.5m secs), half sine. C onform s to EN 6 006 8-2-27 Vibration Single axis 10-500 H z at 2g sw eep and endurance at resonance in all 3 planes. C onform s to EN 6 006 8-2-6 ECP130 Series w w w .xppow er.com AC -D C Pow er Supplies Efficiency Vs Load Figure 1 EC P130PS12

12 V at 130 W

24 V at 130 W

70% 75% 80% 85% 90% 95% 100% 10 20 30 40 50 60 70 80 Forced-CooledConvection-Cooled F 90 100 Load (%)

115 Vac input

230 Vac input

Forced-CooledConvection-Cooled 70% 75% 80% 85% 90% 95% 100% 10 20 30 40 50 60 70 80 90 100 Load (%)

EMC: Emissions EMC: Immunity ECP130 Series AC -D C Pow er Supplies w w w .xppow er.com 4 -30 0 +70 +80 +50 100 Ambient Temperature (º C) Output Load (%) Figure 3 Tem perature D erating C urve Phenom enon Standard Test Level C riteria N otes & C onditions C onducted EN 55011/22 C lass B R adiated EN 55011/22 C lass A C lass B w ith K ing C ore K SB R C 13 x 23 x 7 on input cable and K SB + 25 x 12 x 5 on output cable. H arm onic C urrent EN 6 1000-3 -2 C lass A Voltage Functions EN 6 1000-3 -3 Phenom enon Standard Test Level C riteria N otes & C onditions M edical Device EM C IEC 6 06 01-1-2 Ed.4.0 : 2014 as below L ow Voltage PSU EM C EN 6 1204-3 H igh severity level as below ESD EN 6 1000-4-2 ±8kV contact, ±15kV air A R adiated EN 6 1000-4-3 3A EFT EN 6 1000-4-4 3A Surge EN 6 1000-4-5 Installation class 3 A C onducted EN 6 1000-4-6 3A M agnetic Fields EN 6 1000-4-8 4A Dips and Interruptions EN 55024 (100 VA C ) Dip >9 5% (0 VA C ), 8.3 m s A Dip 3 0% (7 0 VA C ), 416 m s A Dip >9 5% (0 VA C ), 416 0 m s B EN 55024 (240 VA C ) Dip >9 5% (0 VA C ), 10.0 m s A Dip 3 0% (16 8 VA C ), 500 m s A Dip >9 5% (0 VA C ), 5000 m s B EN 60601-1-2 (100 VAC ) D ip 100% (0 VA C ), 10.0 m s A Dip 100% (0 VA C ), 20 m s A D ip 60% (40 VAC ), 100 m s B Perform ance criteria A <25 W D ip 30% (70 VAC ), 500 m s A Dip 100% (0 VA C ), 5000 m s B EN 6 06 01-1-2 (240 VA C ) D ip 100% (0 VA C ), 10.0 m s A Dip 100% (0 VA C ), 20 m s A D ip 60% (96 VAC ), 100 m s A D ip 30% ( 168 VAC ), 500 m s A Dip 100% (0 VA C ), 5000 m s B

(1.6) 0.06 (22.5) 0.89 (2.4) 0.09 (76.2) 3.00 (50.8) 2.00 (3.4) 0.13 (44.5) 57.1 (69.9) 2.75 (3.4) 0.13 CN1 CN2 C50 TR1 ECP130 Series AC -D C Pow er Supplies 5 w w w .xppow er.com Mechanical Details 1. A ll dim ensions show n in inches (m m ). T olerance: ±0.02 (0.5) 2. W eight: 0.43 lbs (19 5 g) approx. N otes Safety Approvals Safety Agency Safety Standard N otes & C onditions C B R eport IEC 6 0950- 1:2005 Inform ation Technology U L U L6 0950- 1, C SA 22.2 N o.6 0950- 1- 11 Ed 2 Inform ation Technology TU V EN 6 0950- 1 Inform ation Technology C E LVD Safety Agency Safety Standard N otes & C onditions C B R eport IEC 6 06 01- 1 Ed 3.1 Including R isk M anagem ent M edical U L AN SI/AAM I ES6 06 01- 1: & C SA C 22.2 N o.6 06 1- 1:08 M edical C E EN 6 06 01- 1 M edical Isolation Safety Standard N otes & C onditions Prim ary to Secondary 2 x M O PP (M eans of Patient Protection) IEC 6 06 01- 1 Ed 3.1 Prim ary to Earth 1 x M O PP (M eans of Patient Protection) Secondary to Earth 1 x M O PP (M eans of Patient Protection) C N 2 - O utput C onnector Pin 1 C om Pin 2 C om Pin 3 +Vout Pin 4 +Vout M ates w ith JST housing VH R -6 N and JST Series SVH -21T -P1.1 crim p term inals C N 1 - Input C onnector Pin 1 L ine Pin 2 N ot Fitted Pin 3 N eutral M ounting hole m arked w ith m ust be connected to safety earth M ates w ith JST housing VH R -4N and JST Series SVH -21T -P1.1 crim p term inals

ECP130 Series AC -D C Pow er Supplies w w w .xppow er.com 16-Nov-15 Figure 4 Estim ated Service Life vs C om ponent Tem perature In order to ensure safe operation of the PSU in the end-use equipm ent, the tem perature of the com ponents listed in the table below m ust not be exceeded. T em perature should be m onitored using therm ocouples placed on the hottest part of the com ponent (out of direct air flow ). See M echanical Details for com ponent locations. The estim ated service life of the EC P13 0 is determ ined by the cooling arrangem ents and load conditions experienced in the end application. Due to the uncertain nature of the end application this estim ated service life is based on the actual m easured tem perature of key capacitors w ith in the product w hen installed by the end application, The graph below expresses the estim ated lifetim e based on the tem perature of these key com ponents based on the average tem perature over the lifetim e of the equipm ent. Tem perature M easurem ents (At M axim um Am bient) C om ponent M ax Tem perature °C TR 1 C oil 120°C L 4 C oil 120°C C 2 105°C C 50 105°C 10000 20000 30000 40000 50000 Lifetime (Hrs) C2 + C52 Temperature (º C) C2 & C50 60000 70000 80000 105 95 85 75 65 Thermal Considerations Service Life