ECL30UD01

ECL15UD01-S XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

• Ultra Compact Size
• Single, Dual & Triple Outputs
• Open Frame PCB & Chassis Mount
• Encapsulated PCB & Chassis Mount
• <0.3 W No Load Input Power
• Peak Load Capability
• 3 Year Warranty ECL Series Input Input Voltage • 85-264 VAC (120-370 VDC) Input Frequency • 47-63 Hz Input Current • ECL05: 0.1 A rms, ECL10: 0.2 A rms ECL15: 0.3 A rms, ECL25: 0.4 A rms ECL30: 0.8 A rms at 230 VAC Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC, cold start at 25 °C Earth Leakage Current• Class II construction no earth Power Factor • EN61000-3-2, class A No Load Input Power • <0.3 W Input Protection • ECL05/10: Internal T1 A/250 VAC fuse ECL15/25/30: Internal T2 A/250 VAC fuse Output Output Voltage • See tables Output Voltage Trim • ±5% on output 1 only, on multiple output versions, V2 & V3 will track by same percentage, (not ‘-E’ or ‘-S’ versions) Initial Set Accuracy • ±1% for output 1, ±1% for output 2 of UD01 & UD02 versions, ±5% for output 2 & output 3 of other versions Minimum Load • Single output versions: none, Multi output versions: UD01 & UD02: 10% V1 & V2 UD03: 10% V1, 20% V2 UT02 & UT03: 10% V1, 20% V2 & V3 to meet regulation specifications Start Up Delay • 3 s max Start Up Rise Time • 14 ms max Hold Up Time • 16 ms typical for single output versions, 12 ms typical for multiple output versions, at full load & 115 VAC Line Regulation • ±0.5% max for single output versions and output 1 of multiple output versions, ±0.9% max for output 2 & output 3 of multiple output versions Load Regulation • 1% max for single output versions, for multiple output versions (see note 5) Cross Regulation • Multi output versions only (see note 5) Transient Response • 4% max deviation, recovery to within 1% in 500 µs for a 25% load change Ripple & Noise • Single output versions: 3.3-5 V versions: 50 mV pk-pk, 12-15 V versions: 120 mV pk-pk, 24-48 V versions: 200 mV pk-pk, Multiple output versions: 1% pk-pk on any output, 20 MHz bandwidth Overvoltage Protection• 115-140% Vnom Overload Protection • Single output versions: ECL05/10/15: 120-150%, ECL25: 120-170% of total power Multiple output versions: 140-200% of total power Short Circuit Protection• Trip and restart (hiccup mode) Temperature • 0.05%/°C Coefficient xppower.com General Efficiency • See tables Isolation • 3000 VAC Input to Output Switching Frequency • 70 kHz typical Power Density • ECL05: 2.25 W/In 3 (PCB Mount version) ECL10: 5.50 W/In 3 (PCB Mount version) ECL15: 5.30 W/In 3 (PCB Mount version) ECL25: 5.90 W/In 3 (PCB Mount version) ECL30: 7.10 W/In 3 (PCB Mount version) MTBF • ECL05/10: >450 kHrs, ECL15/25/30: >400 kHrs, to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature• -20 °C to +70 °C, derate linearly from 100% at +50 °C to 50% at +70 °C Cooling • Convection-cooled Operating Humidity • 95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3000 m Vibration • 2 g, 10 Hz to 500 Hz, 10 mins/cycle, 60 mins each cycle EMC & Safety Emissions • EN55022, level B conducted & radiated Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Radiated Immunity • EN61000-4-3, 10 V/m 80% mod Perf Criteria A EFT/Burst • EN61000-4-4, level 3, Perf Criteria A Surge • EN61000-4-5, installation class 3, Perf Criteria A Conducted Immunity • EN61000-4-6, 10 Vrms Perf Criteria A Magnetic Fields • EN61000-4-8, 10 A/m, Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% for 10 ms, 60% for 100 ms, 100% for 5000 ms Perf Criteria A, B, B Safety Approvals • IEC60950-1, EN60950-1, UL60950-1, CSA22.2 No. 234 per cUL

0.15 (3.8) 1.00 (25.4) 0.80 (20.3) 0.17 (4.4) 0.73 (18.5) 0.90 (22.9) 0.40 (10.1) 0.10 (2.5) 0.10 (2.5) 1.80 (45.7) 1.80 (45.7) ø 0.07 (ø1.8) ø 0.04 (ø1.0) 2.00 (50.8) 0.10 (2.5) +Vo -Vo V Adj. ACN ACL V Adj. 2.56 (65.0) 2.28 (58.0) 4-ø0.126 (ø3.20) 0.14 (3.5) 0.73 (18.5) 0.85 (21.6) 0.15 (4.0) 0.68 (17.4) 1.00 (25.4) +Vo -VoACN ACL 4 x ø 0.04 (ø1.0) 1.07 (27.2) 0.13 (3.4) 0.13 (3.40) 0.91 (23.0) 0.39 (10.0) 2.06 (52.4) +Vo-Vo ACL ACN TOP VIEW Mechanical Details Models and Ratings Output Power Output Voltage Output Current Efficiency Model Number (2) Nominal Peak(1) 4.3 W 3.3 VDC 1.30 A 1.69 A 72% ECL05US03 †^ 5.0 W 5.0 VDC 1.00 A 1.30 A 75% ECL05US05 †^ 5.0 W 9.0 VDC 0.55 A 0.71 A 78% ECL05US09 †^ 5.0 W 12.0 VDC 0.41 A 0.54 A 78% ECL05US12 †^ 5.0 W 15.0 VDC 0.33 A 0.44 A 80% ECL05US15 †^ 5.0 W 24.0 VDC 0.21 A 0.27 A 82% ECL05US24 †^ 5.0 W 48.0 VDC 0.10 A 0.13 A 82% ECL05US48 †^ 8.6 W 3.3 VDC 2.60 A 3.38 A 72% ECL10US03 †^ 10.0 W 5.0 VDC 2.00 A 2.60 A 75% ECL10US05 †^ 10.0 W 9.0 VDC 1.10 A 1.43 A 78% ECL10US09 †^ 10.0 W 12.0 VDC 0.83 A 1.08 A 78% ECL10US12 †^ 10.0 W 15.0 VDC 0.67 A 0.87 A 80% ECL10US15 †^ 10.0 W 24.0 VDC 0.42 A 0.55 A 82% ECL10US24 †^ 10.0 W 48.0 VDC 0.21 A 0.27 A 82% ECL10US48 †^ Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal. 2. Add suffix to model number to define type: add ‘-P’ for PCB mount, add ‘-T’ for chassis mount, add ‘-E’ for encapsulated. 1. All dimensions in inches (mm). 2. Weight: ECL05/10 P Version: 0.057 lbs (26 g) ECL05/10 T Version: 0.057 lbs (26 g) ECL05/10 E Version: 0.13 lbs (60 g) Mating Connectors (-T version only) Input Connector: JST PHR-3 Output Connector: JST PHR-2 Crimps: SPH-002T-P0.5S Cable harness with 300 mm wire available, order part no. ECL10 LOOM KIT Notes Open Frame - Chassis Mount (-T) Encapsulated (-E)Open Frame - PCB Mount (-P) † Available from Farnell & element14. ^ Available from Newark.

0.15 (3.8) 1.21 (30.7) 0.69 (17.5) 0.17 (4.4) 0.36 (9.1) 0.79 (20.1) 0.15 (3.9) 2.13 (54.1) 2.44 (62.0) 0.06 (1.6) -Vo +Vo V Adj. ACN ACL ø 0.07 (ø1.8) ø 0.04 (ø1.0) 0.78 (20.0) max 1.04 (26.4) 0.39 (10.0) 0.27 (6.8) 0.09 (2.5) 3.30 (84.0) 2.54 (64.5) 4x ø 0.14 (4x ø 3.5) 1.36 (34.5) 1.00 (25.4) ACN ACL -Vo +Vo 0.44 (11.1) 2.95 (75.0) TOP VIEW 0.69 (17.5) 0.50 (12.6) 1.31 (33.3) 0.79 (20.1) 0.11 (2.9) 2.13 (54.1) 0.21 (5.4) 2.56 (65.0) -Vo +Vo ACL ACN TOP VIEW V Adj. 3.10 (78.7) 2.80 (71.1) 4-0.12 (3.2) 0.15 (3.8) 0.78 (20.0) max 0.91 (23.1) 0.15 (3.8) 0.95 (24.1) 1.25 (31.7) -Vo +Vo ACN ACL 0.96 (24.4) 0.39 (10.0) 4x ø 0.04 (ø1.0) Optional DIN clip Mechanical Details Models and Ratings Output Power Output Voltage Output Current Efficiency Model Number (2,3) Nominal Peak(1) 10 W 3.3 VDC 3.00 A 3.90 A 75% ECL15US03 †^ 15 W 5.0 VDC 3.00 A 3.90 A 78% ECL15US05 †^ 15 W 9.0 VDC 1.67 A 2.17 A 80% ECL15US09 †^ 15 W 12.0 VDC 1.25 A 1.62 A 80% ECL15US12 †^ 15 W 15.0 VDC 1.00 A 1.30 A 80% ECL15US15 †^ 15 W 24.0 VDC 0.63 A 0.82 A 82% ECL15US24 †^ 15 W 48.0 VDC 0.32 A 0.41 A 82% ECL15US48 †^ 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal. 2. Add suffix to model number to define type: add ‘-P’ for PCB mount, add ‘-T’ for chassis mount, add ‘-E’ for encapsulated, add ‘-S’ for screw terminals. 3. A screw terminal version (-S) is available with DIN clip attached, add suffix ‘D’, e.g. ECL15US24-SD, DIN rail mounting kit is available as a separate item, order code ECL15 DIN CLIP. 4. For medically-approved 15 W power supplies contact sales or see www.xppower.com for details of CU15-M series and VCP15 series. 1. All dimensions in inches (mm). 2. Weight: ECL15 P Version: 0.07 lbs (35 g) T Version: 0.07 lbs (35 g) E Version: 0.20 lbs (90 g) S Version: 0.24 lbs (110 g) Mating Connectors (-T version only) Input Connector: JST PHR-3 Output Connector: JST PHR-4 Crimps: SPH-002T-P0.5S Cable harness with 300 mm wire available, order part no. ECL15 LOOM KIT Notes AC-DC Open Frame - Chassis Mount (-T) Screw Terminal (-S) Encapsulated (-E)Open Frame - PCB Mount (-P) † Available from Farnell & element14. ^ Available from Newark.

0.29 (7.4) 0.29 (7.4) 0.15 (3.8) 0.17 (4.4) 0.96 (17.5) 0.25 (6.3) 0.25 (6.3) 2.44 (62.0) 1.20 (30.7) 2.13 (54.1) 0.06 (1.6) 0.155 (3.9) 0.07 (1.8) 0.79 (20.0) max 7-ø0.04 (ø1.0) 7-ø0.07 (ø1.8) 0.15 (3.81) 0.15 (3.8) 0.95 (24.1) 1.25 (31.8) 0.79 (20.0)Max 0.91 (23.1) 2.80 (71.1) 3.10 (78.7) 4-ø0.13 (ø3.20) ACN Pin5 Pin4 Pin3 Pin2 Pin1 ACL NP 2.56 (65.0) 0.54 (13.7) 0.25 (6.3) 1.31 (33.5) 0.39 (10.0) 0.96 (24.4) 0.54 (13.7) 0.69 (17.5) 0.12 (3.1) 0.25 (6.3) 4-ø0.04 (ø1.0) 0.21 (5.4) 2.13 (54.1) ACN ACL Pin1 Pin4 Pin2 Pin3 Pin5 Top View 0.44 (11.2) Optional DIN clip 1.18 (30.0) 1.36 (34.5) 0.18 (4.6) 0.18 (4.5) 2.56 (65.1) 1.04 (26.4) 2.95 (75.0) 3.31 (84.0) 2-ø0.14 (ø3.5) Pin5 Pin4 Pin3 Pin2 Pin1 ACN ACL Top View Mechanical Details Open Frame - PCB Mount (-P) Open Frame - Chassis Mount (-T) Encapsulated (-E) Screw Terminal (-S) Models and Ratings Output Power Output 1 Output 2 Output 3 Efficiency Model Number (3,4)Voltage Current(2) Voltage Current(2) Voltage Current(2) 15 W +12.0 V 0.65 A -12.0 V 0.650 A 82% ECL15UD01 †^ 15 W +15.0 V 0.50 A -15.0 V 0.500 A 82% ECL15UD02 †^ 15 W 5.0 V(1) 1.50 A 12.0 V(1) 0.625 A 81% ECL15UD03 † Pin UD01/02 UD03 UT02/03

1 V2 NP V3

2 NP V2 RTN COM

3 COM V2 V2

4 V1 V1 V1

5 NP V1 RTN V1 RTN

1 V2 NC V3

2 COM V2 RTN COM

4 COM V1 V1

5 V1 V1 RTN V1 RTN

4 COM +V1 V1

1. Isolated output 2. Peak load of 130% lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal. 3. Add suffix to model number to define type: add ‘-P’ for PCB mount, add ‘-T’ for chassis mount, add ‘-E’ for encapsulated, add ‘-S’ for screw terminals. 4. A screw terminal version (-S) is available with DIN clip attached, add suffix ‘D’ e.g. ECL15UT02-SD, DIN rail mounting kit is available as a separate item, order code ECL15 DIN CLIP. 5. UD01/UD02: Load regulation <3%, 10-100% load. Cross regulation <3%, one output fixed, the other varied from 10-100% load UD03: Load regulation <1% V1, <10% V2 Cross regulation <10% V2, V1 varied from 10-100% load UT02/UT03: Load regulation <1% V1, <10% V2 & V3 Cross regulation <10% V2 & V3, V2 & V3 at 50% load & V1 varied from 20-100% load 1. All dimensions in inches (mm). 3. Weight: ECL15 UD/UT: P Version: 0.09 lbs (40 g) T Version: 0.09 lbs (40 g) E Version: 0.21 lbs(95 g) S Version: 0.26 lbs (120 g) Mating Connectors (-T version only) Input Connector: JST PHR-3 Output Connector: JST XHP-5 Notes AC-DC NP = No pin. NC = No connection. NC = No connection. NP = No pin.

V Adj. 3.46 (87.9) 3.20 (81.3) 4- 0.15 (3.81) 0.13 (3.3) 0.88 (22.4) MAX 1.00 (25.4) 0.13 (3.3) 1.10 (27.9) 1.36 (34.6) -Vo +Vo ACN ACL 3.01 (76.4) 4x ø0.14 (4x ø3.5) 1.57 (40.0) 0.84 (21.3) 0.44 (11.2) ACN ACL -Vo +Vo 1.20 (30.5) 3.43 (87.0) TOP VIEW 1.12 (28.5) 0.39 (10.0) 0.27 (6.8) 0.10 (2.5) 3.78 (96.0) Optional DIN clip 0.15 (3.8) 1.36 (34.6) 1.18 (30.0) 0.17 (4.4) ø0.07 (ø 1.8) ø0.04 (ø1.0) 0.88 (22.3) MAX 0.09 (2.3) 0.59 (15.0) 0.05 (1.4) 2.85 (72.4) 2.96 (75.2) 0.09 (2.3) -Vo +Vo ACN ACL 1.10 (27.9) 0.39 (10.0) 4x ø 0.04 (ø1.0) 1.50 (38.1) 0.59 (15.0) 1.18 (30.0) 0.16 (4.1) 2.85 (72.4) 0.13 (3.2) 3.10 (78.7) -Vo +VoACL ACN TOP VIEW V Adj. Mechanical Details Models and Ratings Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal. 2. Add suffix to model number to define type: add ‘-P’ for PCB mount, add ‘-T’ for chassis mount, add ‘-E’ for encapsulated, add ‘-S’ for screw terminals. 3. A screw terminal version (-S) is available with DIN clip attached, add suffix ‘D’, e.g. ECL25US24-SD, DIN rail mounting kit is available as a separate item, order code ECL25/30 DIN CLIP. 1. All dimensions in inches (mm). 2. Weight: ECL25: P Version: 0.14 lbs (66 g) T Version: 0.14 lbs (66 g) E Version: 0.33 lbs (150 g) S Version: 0.37 lbs (170 g) Mating Connectors (-T version only) Input Connector: JST XHP-3 Output Connector: JST XHP-6 Crimps: SXH-002T-P0.6 Cable harness with 300 mm wire available, order part no. ECL25 LOOM KIT Notes AC-DC Open Frame - PCB Mount (-P) Open Frame - Chassis Mount (-T) Encapsulated (-E) Screw Terminal (-S) Output Power Output Voltage Output Current Efficiency Model Number (2,3) Nominal Peak(1) 20 W 3.3 VDC 6.00 A 7.80 A 75% ECL25US03 †^ 25 W 5.0 VDC 5.00 A 6.50 A 78% ECL25US05 †^ 25 W 9.0 VDC 2.80 A 3.64 A 80% ECL25US09 †^ 25 W 12.0 VDC 2.10 A 2.73 A 80% ECL25US12 †^ 25 W 15.0 VDC 1.67 A 2.17 A 80% ECL25US15 †^ 25 W 24.0 VDC 1.04 A 1.35 A 82% ECL25US24 †^ 25 W 48.0 VDC 0.52 A 0.68 A 82% ECL25US48 †^ † Available from Farnell & element14. ^ Available from Newark. .

Output Power Output 1 Output 2 Output 3 Efficiency Model Number (3,4) Voltage Current(2) Voltage Current(2) Voltage Current(2) 30 W +12.0 V 1.3 A -12.0 V 1.30 A 84% ECL30UD01 †^ 30 W +15.0 V 1.0 A -15.0 V 1.00 A 83% ECL30UD02 †^ 30 W 5.0 V(1) 3.0 A 12.0 V(1) 1.30 A 81% ECL30UD03 †^ 1. Isolated output 2. Peak load of 130% lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal. 3. Add suffix to model number to define type: add ‘-P’ for PCB mount, add ‘-T’ for chassis mount, add ‘-E’ for encapsulated, add ‘-S’ for screw terminals. 4. A screw terminal version (-S) is available with DIN clip attached, add suffix ‘D’ e.g. ECL30UT02-SD, DIN rail mounting kit is available as a separate item, order code ECL25/30 DIN CLIP. 5. UD01/UD02: Load regulation <3%, 10-100% load. Cross regulation <3%, one output fixed, the other varied from 10-100% load UD03: Load regulation <1% V1, <10% V2 Cross regulation <10% V2, V1 varied from 10-100% load UT02/UT03: Load regulation <1% V1, <10% V2 & V3 Cross regulation <10% V2 & V3, V2 & V3 at 50% load & V1 varied from 20-100% load ACN Pin4 Pin5 Pin1 Pin2 VR Pin3 ACL 2.96 (75.2) 2.85 (72.4) 0.05 (1.4) 0.09 (2.3) 0.09 (2.3) 0.29 (7.5) 0.29 (7.5) 0.29 (7.5) 0.29 (7.5) ø 0.04 (ø1.0) 0.88 (22.3) Max 1.05 (26.7) ø 0.07(ø1.8) 0.15 (3.8) 0.17 (4.4) 1.36 (34.6) 1.18 (29.9) Pin2 VR Pin1 NP ACL ACN Pin5 Pin4 Pin3 0.13 (3.3) 1.10 (27.9) 1.36 (34.6) 0.12 (3.0) 0.88 (22.4) Max 1.00 (25.4) 4-ø0.15 (ø3.8) 3.20 (81.3) 3.46 (87.9) 0.13 (3.3) Pin3 ACN ACL Pin2 Pin5 Pin1 Pin4 Top View 0.29 (7.5) 0.29 (7.5) 0.59 (14.9) 0.59 (14.9) 1.50 (38.1) 0.39 (10.0) 1.10 (28.0) C0.04 (1.0) 7-ø0.04 (ø1.00) 0.12 (3.2) 0.16 (4.1) 1.18 (29.9) 2.85 (72.4) 3.10 (78.7) ACL Pin1 Pin2 Pin3 Pin4 Pin5 ACN Top View 0.44 (11.2) 0.18 (4.5) 0.10 (4.5) 3.03 (77.0) 3.43 (87.0) 3.78 (96.0) 0.10 (4.5) 0.10 (2.5) 0.27 (6.8) 1.12 (28.5) 1.21 (30.7) 1.39 (35.2) 1.57 (40.0) Optional DIN clip Open Frame - PCB Mount (-P) Open Frame - Chassis Mount (-T) Encapsulated (-E) Screw Terminal (-S) Pin UD01/02 UD03 UT02/03

1 NP V1 RTN -V1

2 NP V1 +V1

3 V2 NP V3

4 COM V2 RTN COM

5 V1 V2 V2

1 V2 V1 RTN -V1

2 COM V1 +V1

3 COM NC V3

Mating Connectors (-T version only) Input Connector: JST XHP-3 Output Connector: JST XHP-5 1. All dimensions in inches (mm). 3. Weight: ECL30 UD/UT: P Version: 0.13 lbs (60 g) T Version: 0.13 lbs (60 g) E Version: 0.34 lbs (155 g) S Version: 0.39 lbs (175 g) Notes NP = No pin. NC = No connection. NC = No connection. NP = No pin.