ECL05US05

ECL05 XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

• Ultra C om pact Size
• Single, Dual & Triple O utputs
• O pen Fram e PC B & C hassis M ount
• Encapsulated PC B & C hassis M ount
• <0.3 W N o Load Input Pow er
• Peak Load C apability
• 3 Year W arranty ECL Series Input Input Voltage • 85-264 VAC (120-37 0 VD C) Input Frequency • 4 7 -63 H z Input C urrent • ECL05: 0.1 A rm s, ECL10: 0.2 A rm s ECL15: 0.3 A rm s, ECL25: 0.4 A rm s ECL30: 0.8 A rm s at 230 VAC Inrush C urrent • 20 A at 115 VAC, 4 0 A at 230 VAC, cold start at 25 °C Earth Leakage C urrent • Class II construction no earth Pow er Factor • EN 61000-3-2, class A N o Load Input Pow er • <0.3 W Input Protection • ECL05/10: Internal T1 A/250 VAC fuse ECL15/25/30: Internal T2 A/250 VAC fuse Output O utput Voltage • See tables O utput Voltage Trim • ±5% on output 1 only, on m ultiple output versions, V2 & V3 w ill track by sam e percentage, (not ‘-E’ or ‘-S’ versions) Initial Set Accuracy • ±1% for output 1, ±1% for output 2 of U D 01 & U D 02 versions, ±5% for output 2 & output 3 of other versions M inim um Load • Single output versions: none, M ulti output versions: U D 01 & U D 02: 10% V1 & V2 U D 03: 10% V1, 20% V2 U T02 & U T03: 10% V1, 20% V2 & V3 to m eet regulation specifications Start U p D elay • 3 s m ax Start U p R ise Tim e • 14 m s m ax H old U p Tim e • 16 m s typical for single output versions, 12 m s typical for m ultiple output versions, at full load & 115 VAC Line R egulation • ±0.5% m ax for single output versions and output 1 of m ultiple output versions, ±0.9 % m ax for output 2 & output 3 of m ultiple output versions Load R egulation • 1% m ax for single output versions, for m ultiple output versions (see note 5) C ross R egulation • M ulti output versions only (see note 5) Transient R esponse • 4 % m ax deviation, recovery to w ithin 1% in 500 µs for a 25% load change R ipple & N oise • Single output versions: 3.3-5 V versions: 50 m V pk-pk, 12-15 V versions: 120 m V pk-pk, 24 -4 8 V versions: 200 m V pk-pk, M ultiple output versions: 1% pk-pk on any output, 20 M H z bandw idth O vervoltage Protection • 115-14 0% Vnom , 19 5-216% Vnom ECL05/10/15/25 w ith 3.3 V O verload Protection • Single output versions: ECL05/10/15: 120-150% , ECL25: 120-17 0% of total pow er M ultiple output versions: 14 0-200% of total pow er Short C ircuit Protection • T rip and restart (hiccup m ode) Tem perature • 0.05% /°C C oefficient xppow er.com General Efficiency • See tables Isolation • 3000 VAC Input to O utput Sw itching Frequency • 7 0 kH z typical Pow er D ensity • ECL05: 2.25 W /In 3 (PCB M ount version) ECL10: 5.50 W /In 3 (PCB M ount version) ECL15: 5.30 W /In 3 (PCB M ount version) ECL25: 5.9 0 W /In 3 (PCB M ount version) ECL30: 7 .10 W /In 3 (PCB M ount version) M TB F • ECL05/10: > 4 50 kH rs, ECL15/25/30: > 4 00 kH rs, to M IL-H D B K-217 F at 25 °C, G B Environmental O perating Tem perature • -20 °C to +7 0 °C, derate linearly from 100% at +50 °C to 50% at +7 0 °C C ooling • Convection-cooled O perating H um idity • 9 5% R H , non-condensing Storage Tem perature • -4 0 °C to +85 °C O perating Altitude • 3000 m Vibration • 2 g, 10 H z to 500 H z, 10 m ins/cycle, 60 m ins each cycle EMC & Safety Em issions • EN 55022, level B conducted & radiated H arm onic C urrents • EN 61000-3-2, class A Voltage Flicker • EN 61000-3-3 ESD Im m unity • EN 61000-4 -2, level 3 Perf Criteria A R adiated Im m unity • EN 61000-4 -3, 10 V/m 80% m od Perf Criteria A EFT/B urst • EN 61000-4 -4 , level 3, Perf Criteria A Surge • EN 61000-4 -5, installation class 3, Perf Criteria A C onducted Im m unity • EN 61000-4 -6, 10 Vrm s Perf Criteria A M agnetic Fields • EN 61000-4 -8, 10 A/m , Perf Criteria A D ips & Interruptions • EN 61000-4 -11, 30% for 10 m s, 60% for 100 m s, 100% for 5000 m s Perf Criteria A, B , B Safety Approvals • IEC609 50-1, EN 609 50-1, U L609 50-1, CSA22.2 N o. 234 per cU L

0.15 (3.8) 1.00 (25.4) 0.80 (20.3) 0.17 (4.4) 0.73 (18.5) 0.90 (22.9) 0.40 (10.1) 0.075 (1.91) 0.075 (1.91) 1.80 (45.7) ø 0.07 (ø1.8) ø 0.04 (ø1.0) 1.95 (49.5) 0.10 (2.5) +Vo -Vo V Adj. ACN ACL V Adj. 2.56 (65.0) 2.28 (58.0) 4-ø0.126 (ø3.20) 0.14 (3.5) 0.73 (18.5) 0.85 (21.6) 0.15 (4.0) 0.68 (17.4) 1.00 (25.4) +Vo -Vo ACN ACL 4 x ø 0.04 (ø1.0) 1.07 (27.2) 0.13 (3.4) 0.13 (3.40) 0.91 (23.0) 0.39 (10.0) 2.06 (52.4) +Vo -Vo ACL ACN E TOP VIEW Mechanical Details Models and Ratings O utput Pow er O utput Voltage O utput C urrent Efficiency M odel N um ber (2) N om inal Peak (1 ) 4 .3 W 3.3 VD C 1.30 A 1.69 A 7 2% ECL05U S03 5.0 W 5.0 VD C 1.00 A 1.30 A 7 5% ECL05U S05 5.0 W 9 .0 VD C 0.55 A 0.7 1 A 7 8% ECL05U S09 5.0 W 12.0 VD C 0.4 1 A 0.54 A 7 8% ECL05U S12 5.0 W 15.0 VD C 0.33 A 0.4 4 A 80% ECL05U S15 5.0 W 24 .0 VD C 0.21 A 0.27 A 82% ECL05U S24 5.0 W 4 8.0 VD C 0.10 A 0.13 A 82% ECL05U S4 8 8.6 W 3.3 VD C 2.60 A 3.38 A 7 2% ECL10U S03 10.0 W 5.0 VD C 2.00 A 2.60 A 7 5% ECL10U S05 10.0 W 9 .0 VD C 1.10 A 1.4 3 A 7 8% ECL10U S09 10.0 W 12.0 VD C 0.83 A 1.08 A 7 8% ECL10U S12 10.0 W 15.0 VD C 0.67 A 0.87 A 80% ECL10U S15 10.0 W 24 .0 VD C 0.4 2 A 0.55 A 82% ECL10U S24 10.0 W 4 8.0 VD C 0.21 A 0.27 A 82% ECL10U S4 8 Notes 1. Peak load lasting <30 s w ith a m axim um duty cycle of 10 % , average output pow er not to exceed nom inal. 2 . Add suffix to m odel num ber to define type: add ‘-P’ for PC B m ount, add ‘-T’ for chassis m ount, add ‘-E’ for encapsulated. 1. All dim ensions in inches (m m ). 2. W eight: ECL05/10 P Version: 0.057 lbs (26 g) ECL05/10 T Version: 0.057 lbs (26 g) ECL05/10 E Version: 0.13 lbs (60 g) M ating C onnectors (-T version only) Input Connector: JST PH R -3 O utput Connector: JST PH R -2 Crim ps: SPH -002T -P0.5S Cable harness w ith 300 m m w ire available, order part no. ECL10 LO O M KIT Notes Open Frame - Chassis Mount (-T) Encapsulated (-E) Open Frame - PCB Mount (-P)

0.15 (3.8) 1.21 (30.7) 0.69 (17.5) 0.17 (4.4) 0.36 (9.1) 0.79 (20.1) 0.15 (3.9) 2.13 (54.1) 2.44 (62.0) 0.06 (1.6) -Vo +Vo V Adj. ACN ACL ø 0.07 (ø1.8) ø 0.04 (ø1.0) 0.78 (20.0) max 1.04 (26.4) 0.39 (10.0) 0.27 (6.8) 0.09 (2.5) 3.30 (84.0) 2.54 (64.5) 4x ø 0.14 (4x ø 3.5) 1.36 (34.5) 1.00 (25.4) ACN ACL -Vo +Vo 0.44 (11.1) 2.95 (75.0) TOP VIEW 0.69 (17.5) 0.50 (12.6) 1.31 (33.3) 0.79 (20.1) 0.11 (2.9) 2.13 (54.1) 0.21 (5.4) 2.56 (65.0) -Vo +Vo ACL ACN TOP VIEW V Adj. 3.10 (78.7) 2.80 (71.1) 4-0.12 (3.2) 0.15 (3.8) 0.78 (20.0) max 0.91 (23.1) 0.15 (3.8) 0.95 (24.1) 1.25 (31.7) -Vo +Vo ACN ACL 0.96 (24.4) 0.39 (10.0) 4x ø 0.04 (ø1.0) Optional DIN clip Mechanical Details Models and Ratings O utput Pow er O utput Voltage O utput C urrent Efficiency M odel N um ber (2,3) N om inal Peak (1 ) 10 W 3.3 VD C 3.00 A 3.9 0 A 7 5% ECL15U S03 15 W 5.0 VD C 3.00 A 3.9 0 A 7 8% ECL15U S05 15 W 9 .0 VD C 1.67 A 2.17 A 80% ECL15U S09 15 W 12.0 VD C 1.25 A 1.62 A 80% ECL15U S12 15 W 15.0 VD C 1.00 A 1.30 A 80% ECL15U S15 15 W 24 .0 VD C 0.63 A 0.82 A 82% ECL15U S24 15 W 4 8.0 VD C 0.32 A 0.4 1 A 82% ECL15U S4 8 1. Peak load lasting <30 s w ith a m axim um duty cycle of 10 % , average output pow er not to exceed nom inal. 2 . Add suffix to m odel num ber to define type: add ‘-P’ for PC B m ount, add ‘-T’ for chassis m ount, add ‘-E’ for encapsulated, add ‘-S’ for screw term inals. 3. A screw term inal version (-S) is available w ith D IN clip attached, add suffix ‘D ’, e.g. EC L15U S2 4-SD , D IN rail m ounting kit is available as a separate item , order code EC L15 D IN C LIP . 4. For m edically-approved 15 W pow er supplies contact sales or see w w w.xppow er.com for details of C U 15-M series and VC P15 series. 1. All dim ensions in inches (m m ). 2. W eight: ECL15 P Version: 0.07 lbs (35 g) T Version: 0.07 lbs (35 g) E Version: 0.20 lbs (9 0 g) S Version: 0.24 lbs (110 g) M ating C onnectors (-T version only) Input Connector: JST PH R -3 O utput Connector: JST PH R -4 Crim ps: SPH -002T -P0.5S Cable harness w ith 300 m m w ire available, order part no. ECL15 LO O M KIT Notes AC-DC Open Frame - Chassis Mount (-T) Screw Terminal (-S) Encapsulated (-E) Open Frame - PCB Mount (-P)

0.29 (7.4) 0.29 (7.4) 0.15 (3.8) 0.17 (4.4) 0.96 (17.5) 0.25 (6.3) 0.25 (6.3) 2.44 (62.0) 1.20 (30.7) 2.13 (54.1) 0.06 (1.6) 0.155 (3.9) 0.07 (1.8) 0.79 (20.0) max 7-ø0.04 (ø1.0) 7-ø0.07 (ø1.8) 0.15 (3.81) 0.15 (3.8) 0.95 (24.1) 1.25 (31.8) 0.79 (20.0)Max 0.91 (23.1) 2.80 (71.1) 3.10 (78.7) 4-ø0.13 (ø3.20) ACN Pin5 Pin4 Pin3 Pin2 Pin1 ACL NP 2.56 (65.0) 0.54 (13.7) 0.25 (6.3) 1.31 (33.5) 0.39 (10.0) 0.96 (24.4) 0.54 (13.7) 0.69 (17.5) 0.12 (3.1) 0.25 (6.3) 4-ø0.04 (ø1.0) 0.21 (5.4) 2.13 (54.1) ACN ACL Pin1 Pin4 Pin2 Pin3 Pin5 Top View 0.44 (11.2) Optional DIN clip 1.18 (30.0) 1.36 (34.5) 0.18 (4.6) 0.18 (4.5) 2.56 (65.1) 2.95 (75.0) 3.31 (84.0) 2-ø0.14 (ø3.5) Pin5 Pin4 Pin3 Pin2 Pin1 ACN ACL Top View Mechanical Details Open Frame - PCB Mount (-P) Open Frame - Chassis Mount (-T) Encapsulated (-E) Screw Terminal (-S) Models and Ratings O utput Pow er O utput 1 O utput 2 O utput 3 Efficiency M odel N um ber (3,4) Voltage C urrent (2) Voltage C urrent (2) Voltage C urrent (2) 15 W +12.0 V 0.65 A -12.0 V 0.650 A 82% ECL15U D 01 15 W +15.0 V 0.50 A -15.0 V 0.500 A 82% ECL15U D 02 15 W 5.0 V (1 ) 1.50 A 12.0 V (1 ) 0.625 A 81% ECL15U D 03 Pin U D 01 /02 U D 03 U T02/03

1 V2 N P V3

2 N P V2 RTN CO M

3 CO M V2 V2

4 V1 V1 V1

5 N P V1 RTN V1 RTN

Pin U D 01 /02 U D 03 U T02/03

1 V2 N C V3

2 CO M V2 RTN CO M

4 CO M V1 V1

5 V1 V1 RTN V1 RTN

Pin U D 01 /02 U D 03 U T02/03 Pin U D 01 /02 U D 03 U T02/03

4 CO M +V1 V1

1. Isolated output 2 . Peak load of 130 % lasting <30 s w ith a m axim um duty cycle of 10 % , average output pow er not to exceed nom inal. 3. Add suffix to m odel num ber to define type: add ‘-P’ for PC B m ount, add ‘-T’ for chassis m ount, add ‘-E’ for encapsulated, add ‘-S’ for screw term inals. 4. A screw term inal version (-S) is available w ith D IN clip attached, add suffix ‘D ’ e.g. EC L15U T0 2 -SD , D IN rail m ounting kit is available as a separate item , order code EC L15 D IN C LIP . 5. U D 0 1/U D 0 2 : Load regulation <3% , 10 -10 0 % load. C ross regulation <3% , one output fixed, the other varied from 10 -10 0 % load U D 0 3: Load regulation <1% V1, <10 % V2 C ross regulation <10 % V2 , V1 varied from 10 -10 0 % load U T0 2 /U T0 3: Load regulation <1% V1, <10 % V2 & V3 C ross regulation <10 % V2 & V3, V2 & V3 at 50 % load & V1 varied from 2 0 -10 0 % load 1. All dim ensions in inches (m m ). 3. W eight: ECL15 U D /U T: P Version: 0.09 lbs (4 0 g) T Version: 0.09 lbs (4 0 g) E Version: 0.21 lbs(9 5 g) S Version: 0.26 lbs (120 g) M ating C onnectors (-T version only) Input Connector: JST PH R -3 O utput Connector: JST XH P-5 Notes AC-DC N P = N o pin. N C = N o connection. N C = N o connection. N P = N o pin.

V Adj. 3.46 (87.9) 3.20 (81.3) 4- 0.15 (3.81) 0.13 (3.3) 0.88 (22.4) MAX 1.00 (25.4) 0.13 (3.3) 1.10 (27.9) 1.36 (34.6) -Vo +Vo ACN ACL 3.01 (76.4) 4x ø0.14 (4x ø3.5) 1.57 (40.0) 0.84 (21.3) 0.44 (11.2) ACN ACL -Vo +Vo 1.20 (30.5) 3.43 (87.0) TOP VIEW 1.12 (28.5) 0.39 (10.0) 0.27 (6.8) 0.10 (2.5) 3.78 (96.0) Optional DIN clip 0.15 (3.8) 1.36 (34.6) 1.18 (30.0) 0.17 (4.4) ø0.07 (ø 1.8) ø0.04 (ø1.0) 0.88 (22.3) MAX 0.09 (2.3) 0.59 (15.0) 0.05 (1.4) 2.85 (72.4) 2.96 (75.2) 0.09 (2.3) -Vo +Vo ACN ACL 1.10 (27.9) 0.39 (10.0) 4x ø 0.04 (ø1.0) 1.50 (38.1) 0.59 (15.0) 1.18 (30.0) 0.16 (4.1) 2.85 (72.4) 0.13 (3.2) 3.10 (78.7) -Vo +Vo ACL ACN TOP VIEW V Adj. Mechanical Details Models and Ratings Notes 1. Peak load lasting <30 s w ith a m axim um duty cycle of 10 % , average output pow er not to exceed nom inal. 2 . Add suffix to m odel num ber to define type: add ‘-P’ for PC B m ount, add ‘-T’ for chassis m ount, add ‘-E’ for encapsulated, add ‘-S’ for screw term inals. 3. A screw term inal version (-S) is available w ith D IN clip attached, add suffix ‘D ’, e.g. EC L2 5U S2 4-SD , D IN rail m ounting kit is available as a separate item , order code EC L2 5/30 D IN C LIP . 1. All dim ensions in inches (m m ). 2. W eight: ECL25: P Version: 0.14 lbs (66 g) T Version: 0.14 lbs (66 g) E Version: 0.33 lbs (150 g) S Version: 0.37 lbs (17 0 g) M ating C onnectors (-T version only) Input Connector: JST XH P-3 O utput Connector: JST XH P-6 Crim ps: SXH -002T -P0.6 Cable harness w ith 300 m m w ire available, order part no. ECL25 LO O M KIT Notes AC-DC Open Frame - PCB Mount (-P) Open Frame - Chassis Mount (-T) Encapsulated (-E) Screw Terminal (-S) O utput Pow er O utput Voltage O utput C urrent Efficiency M odel N um ber (2,3) N om inal Peak (1 ) 20 W 3.3 VD C 6.00 A 7 .80 A 7 5% ECL25U S03 25 W 5.0 VD C 5.00 A 6.50 A 7 8% ECL25U S05 25 W 9 .0 VD C 2.80 A 3.64 A 80% ECL25U S09 25 W 12.0 VD C 2.10 A 2.7 3 A 80% ECL25U S12 25 W 15.0 VD C 1.67 A 2.17 A 80% ECL25U S15 25 W 24 .0 VD C 1.04 A 1.35 A 82% ECL25U S24 25 W 4 8.0 VD C 0.52 A 0.68 A 82% ECL25U S4 8

O utput Pow er O utput 1 O utput 2 O utput 3 Efficiency M odel N um ber (3,4) Voltage C urrent (2) Voltage C urrent (2) Voltage C urrent (2) 30 W +12.0 V 1.3 A -12.0 V 1.30 A 84 % ECL30U D 01 30 W +15.0 V 1.0 A -15.0 V 1.00 A 83% ECL30U D 02 30 W 5.0 V (1 ) 3.0 A 12.0 V (1 ) 1.30 A 81% ECL30U D 03 1. Isolated output 2 . Peak load of 130 % lasting <30 s w ith a m axim um duty cycle of 10 % , average output pow er not to exceed nom inal. 3. Add suffix to m odel num ber to define type: add ‘-P’ for PC B m ount, add ‘-T’ for chassis m ount, add ‘-E’ for encapsulated, add ‘-S’ for screw term inals. 4. A screw term inal version (-S) is available w ith D IN clip attached, add suffix ‘D ’ e.g. EC L30 U T0 2 -SD , D IN rail m ounting kit is available as a separate item , order code EC L2 5/30 D IN C LIP . 5. U D 0 1/U D 0 2 : Load regulation <3% , 10 -10 0 % load. C ross regulation <3% , one output fixed, the other varied from 10 -10 0 % load U D 0 3: Load regulation <1% V1, <10 % V2 C ross regulation <10 % V2 , V1 varied from 10 -10 0 % load U T0 2 /U T0 3: Load regulation <1% V1, <10 % V2 & V3 C ross regulation <10 % V2 & V3, V2 & V3 at 50 % load & V1 varied from 2 0 -10 0 % load ACN Pin4 Pin5 Pin1 Pin2 VR Pin3 ACL 2.96 (75.2) 2.85 (72.4) 0.05 (1.4) 0.09 (2.3) 0.09 (2.3) 0.29 (7.5) 0.29 (7.5) 0.29 (7.5) 0.29 (7.5) ø 0.04 (ø1.0) 0.88 (22.3) Max 1.05 (26.7) ø 0.07(ø1.8) 0.15 (3.8) 0.17 (4.4) 1.36 (34.6) 1.18 (29.9) Pin2 VR Pin1 NP ACL ACN Pin5 Pin4 Pin3 0.13 (3.3) 1.10 (27.9) 1.36 (34.6) 0.12 (3.0) 0.88 (22.4) Max 1.00 (25.4) 4-ø0.15 (ø3.8) 3.20 (81.3) 3.46 (87.9) 0.13 (3.3) Pin3 ACN ACL Pin2 Pin5 Pin1 Pin4 Top View 0.29 (7.5) 0.29 (7.5) 1.50 (38.1) 0.39 (10.0) 1.10 (28.0) C0.04 (1.0) 7-ø0.04 (ø1.00) 0.12 (3.2) 0.16 (4.1) 1.18 (29.9) 2.85 (72.4) 3.10 (78.7) ACL Pin1 Pin2 Pin3 Pin4 Pin5 ACN Top View 0.44 (11.2) 0.18 (4.5) 0.10 (4.5) 3.03 (77.0) 3.43 (87.0) 3.78 (96.0) 0.10 (4.5) 0.19 (4.8) 0.10 (2.5) 0.27 (6.8) 1.12 (28.5) 1.21 (30.7) 1.39 (35.2) 1.57 (40.0) Optional DIN clip Open Frame - PCB Mount (-P) Open Frame - Chassis Mount (-T) Encapsulated (-E) Screw Terminal (-S) Pin U D 01 /02 U D 03 U T02/03

1 N P V1 RTN -V1

2 N P V1 +V1

3 V2 N P V3

4 CO M V2 RTN CO M

5 V1 V2 V2

Pin U D 01 /02 U D 03 U T02/03

1 V2 V1 RTN -V1

2 CO M V1 +V1

3 CO M N C V3

Pin U D 01 /02 U D 03 U T02/03 Pin U D 01 /02 U D 03 U T02/03 M ating C onnectors (-T version only) Input Connector: JST XH P-3 O utput Connector: JST XH P-5 1. All dim ensions in inches (m m ). 3. W eight: ECL30 U D /U T: P Version: 0.13 lbs (60 g) T Version: 0.13 lbs (60 g) E Version: 0.34 lbs (155 g) S Version: 0.39 lbs (17 5 g) Notes N P = N o pin. N C = N o connection. N C = N o connection. N P = N o pin.