ECH-U1H224GC9 PANASONIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use . Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. ʵ' $ ʵ Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(C) Stacked metallized PPS film as dielectric with simple mold-less construction ■Features

  • Small in size
  • Low loss and excellent frequency characteristics
  • For reflow soldering
  • RoHS directive compliant ■Recommended Applications
  • Time-constant
  • Filtering
  • Oscillation and resonance
  • Resonance circuit for LCD backlight inverter unit ■Explanation of Numbers 123456789 1 0 1 1 E C H U 1 Product code Dielectric & construction Rated voltage Capacitance C Cap. Tol. Suffix Suffix 1 100 VDC 9 12 mm V 16 mm Tape width ■Specifications ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. Category temp. range (Including temperature-rise on unit surface) ʵ55 ˆ to ʴ105 ˆ

100 VDC

0.010 µF to 0.22 µF(E12) ±2 %(G),±5 %(J) Between terminals : Rated volt. (VDC)✕150 % 60 s tanЎʽ0.6 % (20 ˆ, 1 kHz) IRʾ3000 ̢Њ(20 ˆ, 100 VDC, 60 s) Reflow soldering : 260 ˚C max. and 95 s max. at more than 220 ˚C (Temp. at cap. Surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions G ±2 % J ±5 % pŒ¯ ¶ ‚ P1 ‘32 12.11.14 20:49 y[W 18

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use . Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. ʵ' $ ʵ Plastic Film Capacitors ■ Construction ■Dimensions in mm (not to scale) ■Recommended for Land Dimensions (mm) ■Taping Specification for Automatic Mounting Refer to the page of taping specifications. ■ Rating, Dimensions & Quantity/Reel

  • Capacitance tolerance: ±2 %(G), ±5 %(J) sizecode E1 4.8 3.3 1.4 E2 4.8 3.3 2.0 E3a 4.8 3.3 2.4 E3 4.8 3.3 2.8 D1 6.0 4.1 1.8 D2 6.0 4.1 2.0 D3 6.0 4.1 2.4 D4 6.0 4.1 2.8 D5 6.0 4.1 3.2 Z 7.1 5.0 ❈ Y 7.1 6.3 ❈ ❈Refer to the column “ Rating,Dimensions&Quantity” LWH 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 ECHU1103˘C9 ECHU1123˘C9 ECHU1153˘C9 ECHU1183˘C9 ECHU1223˘C9 ECHU1273˘C9 ECHU1333˘C9 ECHU1393˘C9 ECHU1473˘C9 ECHU1563˘C9 ECHU1683˘C9 ECHU1823˘C9 ECHU1104˘C9 ECHU1124˘C9 ECHU1154˘CV ECHU1184˘CV ECHU1224˘CV 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 7.1 7.1 7.1 7.1 7.1 7.1 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 5.0 6.3 6.3 6.3 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 2.8 3.0 3.4 3.4 4.0 4.8 E3a Z Z Z Y Y Y 3000 2000 3000 2000 1500 1000 Cap.(µF) Rated volt. 100 VDC Part No. Dimensions (mm) LWH Size Code Q'ty ˢ Cap. tol. code Size code Land dimensions Reflow soldering E1,E2,E3a,E3 2.6 6.6 3.0 Z 4.5 9.0 4.6 Y 4.5 9.0 5.7 ABC ❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Chip pŒ¯ ¶ ‚ P1 ‘32 12.11.14 20:49 y[W 19