ECH8601M_12 SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Low ON-resistance • Built-in gate protection resistor
  • 2.5V drive • Best suited for LiB charging and discharging switch
  • Common-drain type • Halogen free compliance
  • Protection diode in Specifi cations Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage V DSS 24 V Gate-to-Source Voltage V GSS ±12 V Drain Current (DC) I D 8A Drain Current (Pulse) I DP PW≤10μs, duty cycle≤1% 60 A Allowable Power Dissipation P D When mounted on ceramic substrate (1000mm ×0.8mm) 1unit 1.5 W Total Dissipation P T When mounted on ceramic substrate (1000mm ×0.8mm) 1.6 W Channel Temperature Tch 150 °C Storage Temperature Tstg - -55 to +150 °C Package Dimensions unit : mm (typ.) 7011A-003

50112 TKIM/72308PE TIIM TC-00001533

General-Purpose Switching Device

Applications

http://semicon.sanyo.com/en/network Product & Package Information

  • Package : ECH8
  • JEITA, JEDEC : -
  • Minimum Packing Quantity : 3,000 pcs./reel Packing Type : TL Marking Electrical Connection 8765 1234 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain 6 : Drain 7 : Drain 8 : Drain SANYO : ECH8 1 4 0.15 0 to 0.02 0.250.25 2.8 2.3 0.65 2.9 0.3 0.90.07 Top View Bottom View TL ECH8601M-TL-H TL Lot No.

No. A1174-2/7 Electrical Characteristics at Ta=25°C Parameter Symbol Conditions Ratings Unit min. typ. max. Drain-to-Source Breakdown Voltage V (BR)DSS ID=1mA, VGS=0V 24 V Zero-Gate Voltage Drain Current I DSS V DS=20V, VGS=0V 1 μA Gate-to-Source Leakage Current I GSS VGS=±8V, VDS=0V ±10 μA Cutoff Voltage V GS(off) V DS=10V, ID=1mA 0.5 1.3 V Forward Transfer Admittance | yfs | VDS=10V, ID=4A 3.1 5.3 S Static Drain-to-Source On-State Resistance RDS(on)1 I D=4A, VGS=4.5V 13.5 17 23 m Ω RDS(on)2 I D=4A, VGS=4.0V 14 18 24 m Ω RDS(on)3 I D=4A, VGS=3.1V 14.5 20 30 m Ω RDS(on)4 I D=2A, VGS=2.5V 16 24 35 m Ω Turn-ON Delay Time td(on) See specifi ed Test Circuit. 300 ns Rise Time tr 1000 ns Turn-OFF Delay Time td(off) 3000 ns Fall Time tf 1800 ns Total Gate Charge Qg VDS=10V, VGS=4.5V, ID=8A 7.5 nC Gate-to-Source Charge Qgs 1.5 nC Gate-to-Drain “Miller” Charge Qgd 2.0 nC Diode Forward Voltage VSD IS=8A, VGS=0V 0.8 1.2 V Switching Time Test Circuit

Ordering Information

Device Package Shipping memo ECH8601M-TL-H ECH8 3,000pcs./reel Pb-Free and Halogen Free PW=10μs D.C.≤1% P. G 50Ω Rg Rg=1kΩ G S D ID=4A RL=2.5Ω VDD=10V VOUT ECH8601M VIN VIN

No. A1174-3/7 Gate-to-Source V oltage, VGS -- V ID -- VGS Drain Current, ID -- A IT13573 VDS=10V --25 Ta=75 Drain-to-Source V oltage, VDS -- V ID -- VDS Drain Current, ID -- A IT13805 VGS=1.5V Gate-to-Source V oltage, VGS -- V RDS(on) -- VGS Drain Current, ID -- A Diode Forward V oltage, VSD -- V Source Current, IS -- A IS -- VSD Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 0.1 1.0 1.0 1075327 532 75°C Ta= --25 IT13575 VDS=10V IT13576 0.001 0.01 0.1 1.0 VGS=0V Ta=75 --25 81 0 Ta=25°CID=2A IT13574 25°C Drain Current, ID -- A SW Time -- ID Switching Time, SW Time -- ns Total Gate Charge, Qg -- nC VGS -- Qg Gate-to-Source V oltage, VGS -- V Ambient Temperature, Ta -- °C RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 0.1 1.0 23 5 7 23 5 7 10 1000 100 td(on) IT13857 td(off) tf VDD=10V VGS=4.5V tr 012345 8 76 4.0 4.5 2.5 3.5 3.0 1.5 2.0 0.5 1.0 VDS=10V ID=8A IT13858 IT13856 --60 --40 --20 0 20 40 60 80 100 140 120 160 VGS =3.1V , I D=4.0A VGS =2.5V , I D=2.0A VGS=4.5V , I D=4.0A VGS=4.0V , ID=4.0A Forward Transfer Admittance, | yfs | -- S | yfs | -- ID

No. A1174-4/7 Ambient Temperature, Ta -- °C PD -- Ta Allowable Power Dissipation, PD -- W 20 40 0.6 1.0 1.4 1.5 1.8 0.4 0.2 0.8 1.2 1.6 60 80 100 120 140 160 IT13722 Total Dissipation 1unit When mounted on ceramic substrate (1000mm2✕0.8mm) A S O Drain-to-Source V oltage, VDS -- V Drain Current, ID -- A IT13721 0.1 1.0 0.01 0.01 0.1 5723 2 1.05732 105733 25 Operation in this area is limited by RDS(on). 100 μs 100ms DC operation 10ms 1ms

100 IDP=60A

ID=8A PW≤10μs Ta=25°C Single pulse When mounted on ceramic substrate (1000mm 2✕0.8mm) 1unit

No. A1174-5/7 Embossed Taping Specifi cation ECH8601M-TL-H

No. A1174-6/7 Outline Drawing Land Pattern Example ECH8601M-TL-H Mass (g) Unit 0.02 * For reference mm Unit: mm 0.4 0.6 2.8 0.65

PS No. A1174-7/7 This catalog provides information as of April, 2012. Specifi cations and information herein are subject to change without notice. Note on usage : Since the ECH8601M is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer 's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer 's products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.