ECH-U1H104GX9

ECH-U1H104GX9 PANASONIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use . Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. ʵ' $ ʵ Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(X) Stacked metallized PPS film as dielectric with simple mold-less construction ■Features

• Small in size (minimum size 1.6 mm ✕ 0.8 mm)
• 85 ˚C, 85 %RH, W.V.✕ 1.0 for 500 hours
• For reflow soldering
• RoHS directive compliant ■Recommended Applications
• Time-constant
• Filtering
• Oscillation and resonance ■Explanation of Part Numbers 123456789 1 0 1 1 1 2 E C H U Product code Dielectric & construction Rated voltage Capacitance X Cap. Tol. Suffix Suffix ■Specifications ■Construction ■Dimensions in mm (not to scale) ❈ Please consult us for flow soldering ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. 1C 16 VDC 1H 50 VDC 5 8 mm size ø180 mm 9 12 mm size ø330 mm ❈ Tape width 8 mm and diameter ø330 mm reel is prepared. Tape width Reel diameter Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) ʵ55 ˆ to ʴ125 ˆ

16 VDCɼ50 VDC

(50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / ˆat more than 105 ˆ) 0.00010 µF to 0.22 µF (E12) ±2 %(G), ±5 %(J) Between terminals : Rated volt. (VDC)✕150 % 60 s tanЎʽ0.6 % (20 ˆ, 1 kHz)

16 VDCɿIRʾ3000 MЊ (20 ˆ, 10 VDC, 60 s)

50 VDCɿIRʾ3000 MЊ (20 ˆ, 50 VDC, 60 s)

Soldering conditions Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface) saize code L WH e g G ±2 % J ±5 % pŒ¯ ¶ ‚ P1 ‘32 12.11.14 20:49 y[W 16

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use . Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. ʵ' $ ʵ Plastic Film Capacitors ■Rating, Dimensions & Quantity/Reel

• Capacitance tolerance : ±2 %(G), ±5 %(J) ■Taping Specification for Automatic Mounting Refer to the page of taping specifications Chip 0.00010 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Cap. (µF) ECHU1C101˘X5 1.6 0.8 0.7 K1 ECHU1C121˘X5 1.6 0.8 0.7 K1 ECHU1C151˘X5 1.6 0.8 0.7 K1 ECHU1C181˘X5 1.6 0.8 0.7 K1 ECHU1C221˘X5 1.6 0.8 0.7 K1 ECHU1C271˘X5 1.6 0.8 0.7 K1 ECHU1C331˘X5 1.6 0.8 0.7 K1 ECHU1C391˘X5 1.6 0.8 0.7 K1 ECHU1C471˘X5 1.6 0.8 0.7 K1 ECHU1C561˘X5 1.6 0.8 0.7 K1 ECHU1C681˘X5 1.6 0.8 0.7 K1 ECHU1C821˘X5 1.6 0.8 0.7 K1 ECHU1C102˘X5 1.6 0.8 0.7 K1 ECHU1C122˘X5 1.6 0.8 0.7 K1 ECHU1C152˘X5 1.6 0.8 0.7 K1 ECHU1C182˘X5 1.6 0.8 0.7 K1 ECHU1C222˘X5 1.6 0.8 0.7 K1 ECHU1C272˘X5 1.6 0.8 0.7 K1 ECHU1H101˘X5 2.0 1.25 0.9 J1 ECHU1H121˘X5 2.0 1.25 0.9 J1 ECHU1H151˘X5 2.0 1.25 0.9 J1 ECHU1H181˘X5 2.0 1.25 0.9 J1 ECHU1H221˘X5 2.0 1.25 0.9 J1 ECHU1H271˘X5 2.0 1.25 0.9 J1 ECHU1H331˘X5 2.0 1.25 0.9 J1 ECHU1H391˘X5 2.0 1.25 0.9 J1 ECHU1H471˘X5 2.0 1.25 0.9 J1 ECHU1H561˘X5 2.0 1.25 0.9 J1 ECHU1H681˘X5 2.0 1.25 0.9 J1 ECHU1H821˘X5 2.0 1.25 0.9 J1 ECHU1H102˘X5 2.0 1.25 0.9 J1 ECHU1H122˘X5 2.0 1.25 0.9 J1 ECHU1H152˘X5 2.0 1.25 0.9 J1 ECHU1H182˘X5 2.0 1.25 0.9 J1 ECHU1H222˘X5 2.0 1.25 0.9 J1 ECHU1H272˘X5 2.0 1.25 0.9 J1 ECHU1H332˘X5 3.2 1.6 0.9 H1 ECHU1H392˘X5 3.2 1.6 0.9 H1 ECHU1H472˘X5 3.2 1.6 0.9 H1 ECHU1H562˘X5 3.2 1.6 0.9 H1 ECHU1H682˘X5 3.2 1.6 0.9 H1 ECHU1H822˘X5 3.2 1.6 1.1 H2 ECHU1H103˘X5 3.2 1.6 1.1 H2 ECHU1H123˘X5 3.2 2.5 1.1 G1 ECHU1H153˘X5 3.2 2.5 1.1 G1 ECHU1H183˘X5 3.2 2.5 1.5 G2 ECHU1H223˘X5 3.2 2.5 1.5 G2 ECHU1H273˘X5 3.2 2.5 1.5 G2 ECHU1H333˘X5 3.2 2.5 2.1 G3 ECHU1H393˘X5 3.2 2.5 2.1 G3 ECHU1H473˘X9 4.8 3.3 1.5 E1 ECHU1H563˘X9 4.8 3.3 1.5 E1 ECHU1H683˘X9 4.8 3.3 1.5 E1 ECHU1H823˘X9 4.8 3.3 2.1 E2 ECHU1H104˘X9 4.8 3.3 2.1 E2 ECHU1H124˘X9 6.0 4.1 1.9 D1 ECHU1H154˘X9 6.0 4.1 1.9 D1 ECHU1H184˘X9 6.0 4.1 2.5 D3 ECHU1H224˘X9 6.0 4.1 2.8 D4 3000 2000 3000 2000 ECHU1C332˘X5 2.0 1.25 0.9 J1 ECHU1C392˘X5 2.0 1.25 0.9 J1 ECHU1C472˘X5 2.0 1.25 0.9 J1 ECHU1C562˘X5 2.0 1.25 0.9 J1 ECHU1C682˘X5 2.0 1.25 0.9 J1 ECHU1C822˘X5 2.0 1.25 1.1 J2 ECHU1C103˘X5 2.0 1.25 1.1 J2 ECHU1C123˘X5 3.2 1.6 0.9 H1 ECHU1C153˘X5 3.2 1.6 0.9 H1 ECHU1C183˘X5 3.2 1.6 0.9 H1 ECHU1C223˘X5 3.2 1.6 0.9 H1 ECHU1C273˘X5 3.2 1.6 1.1 H2 ECHU1C333˘X5 3.2 1.6 1.1 H2 ECHU1C393˘X5 3.2 1.6 1.5 H3 ECHU1C473˘X5 3.2 1.6 1.5 H3 ECHU1C563˘X5 3.2 2.5 1.5 G2 ECHU1C683˘X5 3.2 2.5 1.5 G2 ECHU1C823˘X5 3.2 2.5 2.1 G3 ECHU1C104˘X5 3.2 2.5 2.1 G3 3000 4000 2000 Rated volt. 16 VDC Part No. Dimensions (mm) LWH Size Code Q'ty Rated volt. 50 VDC Part No. Dimensions (mm) LWH Size Code Q'ty ˢ Cap. tol. code ˢ ■Recommended for Land Dimensions (mm) Size Code Land dimensions Reflow soldering ABC K1 0.6 2.0 0.7 J1,J2 0.8 2.4 1.1 H1,H2,H3 1.8 3.6 1.4 G1,G2,G3 1.8 3.6 2.3 E1,E2 3.0 5.6 3.0 D1,D3,D4 4.0 7.0 3.8 ❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. pŒ¯ ¶ ‚ P1 ‘32 12.11.14 20:49 y[W 17

(Stacked Metallized Film) 3.3nF 10nF 27nF -10 -60 -40 -20 0 20 40 60 80 100 120 140 Capacitance change(%) 3.3nF 10nF 27nF -60 -40 -20 0 20 40 60 80 100 120 140 Temperature Characteristics Frequency Characteristics Electrical Characteristics <Typical Data > 10nF 3.3nF 27nF 10nF 27nF 1.E+06 1.E+07 1.E+08 1.E+09 1.E+10 1.E+11 1.E+12 -60 -40 -20 0 20 40 60 80 100 120 140 3.3nF 10nF 27nF -10 1 10 100 1000 10000 3.3nF 10nF 27nF 1 10 100 1000 10000 3.3nF 10nF 27nF 0.1 100 1000 10000 100000 1 10 100 1000 10000 Insulation resistance(ohm) Dissipation factor(%) Capacitance change(%)Impedance(ohm) Dissipation factor(%) at 1kHz at 1kHz at DC10V Frequency(kHz)Temperature(Degree C) Frequency(kHz)Temperature(Degree C) ECHU (X) Type DC10V series Frequency(kHz)Temperature(Degree C)

(Stacked Metallized Film) Permissible Current Permissible Voltage Applicable Specifications DC Rated Voltage (V) Frequency(kHz)Frequency(kHz) ECHU (X) Type DC10V series * Please consult Panasonic if your condition exceeds the above *The current(0-P) value is calculated using nominal capacitance. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. to 27nFFrom 3.3nF -60 -40 -20 0 20 40 60 80 100 120 140 Voltage Derating by Temperature Surface Temperature of Capacitor(DegreeC) Pulse Handling Capability (dv/dt) (Max 10000cycles) Rating Voltage Capacitance Value(uF) code dV/dt (V/us) Current(0-P) (A) 0.0033 332 47 0.16 0.0039 392 44 0.17 0.0047 472 40 0.19 0.0056 562 37 0.21 0.0068 682 34 0.23 0.0082 822 31 0.25 0.01 103 28 0.28 0.012 123 26 0.31 0.015 153 24 0.36 0.018 183 22 0.40 0.022 223 20 0.44 0.027 273 18 0.49 DC 10V Effective value (Arms) 3.3nF3.9nF 4.7nF5.6nF 6.8nF8.2nF 10nF12nF 15nF 18nF 22nF 27nF 0.0 0.1 0.2 0.3 0.4 0.5 1 10 100 1000 to 27nFFrom 3.3nF 100 1 10 100 1000 Effective value (Vrms) (at sine wave)

ECHU (X) Type DC16V series Temperature Characteristics Frequency Characteristics Electrical Characteristics < Typical Data > (Stacked Metallized Film) -60 -40 -20 0 20 40 60 80 100120 140 Temperature(Degree C) at 1kHz 0.010uF 0.10uF -10 Temperature(Degree C) -60 -40 -20 0 20 40 60 80 100 120140 at 1kHz 0.010uF 0.10uF Capacitance change(%) -10 1 10 100 1000 10000 0.010uF 3300pF 0.10uF Frequency (kHz) Capacitance change(%) Dissipation factor(%) 1 10 100 1000 10000 0.010uF 3300pF 0.10uF Frequency (kHz) Dissipation factor(%) Temperature(Degree C) 1.E+06 1.E+07 1.E+08 1.E+09 1.E+10 1.E+11 1.E+12 -60 -40 -20 0 20 40 60 80 100120140 0.10uF 0.010uF at DC 10V Insuration resistance(ohm) Frequency (kHz) 0.01 0.1 100 1000 10000 10 100 1000 10000 100000 0.010uF 3300pF 0.10uF Impedance(ohm)

ECHU (X) Type DC16V series Pulse Handling Capability (dv/dt) (Max 10000cycles) Applicable Specifications (Stacked Metallized Film) dv/dt(V/us) 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 Capacitance Value(uF) 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 Code DC 16V Rating Voltage 0.28 0.31 0.35 0.38 0.42 0.48 0.52 0.58 0.65 0.72 0.81 0.89 1.02 1.09 1.22 1.34 1.50 1.64 1.90 Current(0-P) (A) * Please consult Panasonic if your condition exceeds the above spec. *The current( 0-P) value is calculated using nominal capacitance. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. Permissible Voltage 100 10 100 1000 From 3300 pF to 0.039 uF From 0.047 uF to 0.10 uF (at sine wave) Frequency (kHz) Effective value (A) Permissible Current 0.0 0.5 1.0 1.5 2.0 10 100 1000 0.10 uF 0.082 uF 0.068 uF 0.056 uF 0.047 uF 0.039 uF 0.033 uF 0.027 uF 0.022 uF 0.018 uF 0.015 uF 0.012 uF 0.010 uF 8200 pF 6800 pF 4700 pF 3900 pF 3300 pF Frequency (kHz) 5600 pF Effective value (A) Voltage Derating by Temperature -60 -40 -20 0 20 40 60 80 100120140 Surface Temperature of Capacitor(DegreeC) DC Rated Voltage (V)

0.01 0.1 100 1000 10000 100 1000 10000 100000 100pF 1000pF 0.039uF 0.1uF 0.22uF 1.E+06 1.E+07 1.E+08 1.E+09 1.E+10 1.E+11 1.E+12 -60 -40 -20 0 20 40 60 80 100 120 140 0.01uF 100pF 1000pF 0.1uF 0.22uF (Stacked Metallized Film) -10 -60 -40 -20 0 20 40 60 80 100 120 140 100pF 1000pF 0.01uF 0.1uF 0.22uF Capacitance change(%) -60 -40 -20 0 20 40 60 80 100 120 140 100pF 1000pF 0.01uF 0.1uF 0.22uF Temperature Characteristics Frequency Characteristics Electrical Characteristics <Typical Data > -10 10 100 1000 10000 0.039uF 1000pF 100pF 0.22uF 0.1uF 10 100 1000 10000 0.039uF 1000pF 100pF 0.1uF 0.22uF Insulation resistance(ohm) Dissipation factor(%) Capacitance change(%)Impedance(ohm) Dissipation factor(%) at 1kHz at 1kHz at DC50V Frequency(kHz)Temperature(Degree C) Frequency(kHz)Temperature(Degree C) ECHU (X) Type DC50V series Frequency(kHz)Temperature(Degree C)

0.0 0.2 0.4 0.6 0.8 1.0 1.2 10 100 1000 3300pF3900pF 4700pF 5600pF 6800pF 8200pF 0.01uF 0.012uF 0.015uF 0.018uF 0.022uF 0.027uF 0.033uF 0.039uF 0.00 0.02 0.04 0.06 0.08 0.10 0.12 10 100 1000 2700pF 2200pF 1800pF 1500pF 1200pF 1000pF 820pF 680pF 560pF ～100pF 0.0 0.5 1.0 1.5 2.0 10 100 0.047uF 0.056uF 0.068uF 0.082uF 0.1uF 0.12uF 0.15uF 0.18uF 0.22uF (Stacked Metallized Film) Effective value (Arms) Permissible Current Permissible Current Applicable Specifications Effective value Frequency(kHz)Frequency(kHz) ECHU (X) Type DC50V series *Please consult Panasonic if your condition exceeds the above *The current(0-P) vlue is calculated using nominal capacitance. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. Effective value (Arms) Permissible VoltagePermissible Current (at sine wave) Frequency(kHz) Effective value (Arms) Frequency(kHz)

Value(uF) code dV/dt (V/us) Current (Ao-p) 0.00010 101 1100 0.11 0.00012 121 1050 0.13 0.00015 151 940 0.14 0.00018 181 890 0.16 0.00022 221 800 0.18 0.00027 271 730 0.20 0.00033 331 690 0.23 0.00039 391 610 0.24 0.00047 471 580 0.27 0.00056 561 520 0.29 0.00068 681 480 0.33 0.00082 821 440 0.36 0.0010 102 400 0.40 0.0012 122 370 0.44 0.0015 152 340 0.51 0.0018 182 310 0.56 0.0022 222 270 0.59 0.0027 272 260 0.70 DC 50V 100 10 100 0.22uF 0.18uF 0.15uF 0.12uF0.10uF 0.082uF0.068uF 0.056uF0.047uF 100 10 100 1000 From 3300pF to 0.012uF From 0.015uF to 0.039uF (Stacked Metallized Film) Permissible Voltage Permissible Voltage Applicable Specifications Frequency(kHz)Frequency(kHz) ECHU (X) Type DC50V series *Please consult Panasonic if your condition exceeds the above *The current(0-P) value is calculated using nominal capacitance. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. Rating Voltage Capacitance Value(uF) code dV/dt (V/us) Current (Ao-p) 0.0033 332 240 0.79 0.0039 392 220 0.86 0.0047 472 200 0.94 0.0056 562 190 1.06 0.0068 682 170 1.16 0.0082 822 160 1.31 0.010 103 145 1.45 0.012 123 135 1.62 0.015 153 120 1.80 0.018 183 110 1.98 0.022 223 100 2.20 0.027 273 94 2.54 0.033 333 86 2.84 0.039 393 78 3.04 DC 50V Pulse Handling Capability (dv/dt) (Max 10000cycles) (at sine wave)(at sine wave) Pulse Handling Capability (dv/dt) (Max 10000cycles) Effective value Effective value

-60 -40 -20 0 20 40 60 80 100 120 140 From 100pF to 0.1uF From 0.12uF to 0.22uF (Stacked Metallized Film) Applicable Specifications ECHU (X) Type DC50V series *Please consult Panasonic if your condition exceeds the above *The current(0-P) value is calculated using nominal capacitance. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. Voltage Derating by Temperature Surface Temperature of Capacitor(DegreeC) Rating Voltage Capacitance Value(uF) code dV/dt (V/us) Current (Ao-p) 0.047 473 72 3.38 0.056 563 68 3.81 0.068 683 62 4.22 0.082 823 56 4.59 0.10 104 52 5.20 0.12 124 48 5.76 0.15 154 44 6.60 0.18 184 40 7.20 0.22 224 36 7.92 DC 50V Pulse Handling Capability (dv/dt) (Max 10000cycles) DC Rated Voltage (V)