ECE85A LSTD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Silicone Elastomer with Silver Glass USA: +1.866.928.8181 Europe: +49.0.8031.2460.0 Asia: +86.755.2714.1166 www.lairdtech.com EMI-DS-ECE85A 041715 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.
FEATURES
- Utilizes both conductive andnon- conductive materials
- Provides stronger environmental shielding to the outside of gaskets due to pure silicone
- Retains strong EMI protection
- Cost-effective solution
- Able to extrude in various sizes and profiles MARKETS
- DataCom
- Medical SILVER GLASS FILLED SILICONE ELASTOMER ECE85A is a Silver-coated Glass filled silicone elastomer. This material can be Molded, Extruded, or formed into sheets and then Die Cut. See our catalog for standard shapes that might be available to test, or provide information about your needs for a custom profile. SPECIFICATIONS TARGET SPECIFICATION Color Tan Elastomer Silicone Filler Silver Glass Hardness 75 ± 7 Shore A Volume Resistivity 0.004 ohm-cm, maximum Density Density 2.0 ± 0.25 g/cm3 Tensile Strength 200 psi, minimum Elongation Min 60% Tear Strength 30 ppi, minimum Temperature Range -45°C to 160°C