ECE80 XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

ECE80 Series AC -D C Pow er Supplies Summary C haracteristic M inim um Typical M axim um U nits N otes & C onditions Input Range 85 2 64 VAC D erate load from 100% at 90 VAC to 90% at 85 VAC N o Load Input Pow er <0.3 W 12 -36 V versions <0.5 W 48 V version Efficiency 86 87 88 % See note 4 above O perating T em perature -40 +7 0 °C Som e specification param eters m ay not m et below -2 5 °C . D erate linearly from 100% load at +5 0 °C to 5 0% load at 7 0 °C . EM C EN 5 5 02 2 & 32 Level B C onducted & Radiated, EN 61000-4, EN 61000-3 Safety A pprovals EN 6095 0-1, U L6095 0-1, C SA 2 2 .2 N o. 2 34 per cU L The ECE80 series of compact encapsulated AC-DC power modules are available in both PCB & chassis mount versions offering exceptional power density of >11W/in 3. Output voltages are available from 12 – 48 VDC and these “green power” modules offer high active mode efficiency and low no load power consumption. They also provide a peak load capability up to 130% of nominal power for up to 30s and a wide operating temperature range from -40 to +70°C.

  • Ultra Compact Size
  • Single Outputs from 12 to 48 V
  • Encapsulated
  • PCB, Chassis Mount and DIN Rail Versions
  • <0.3 W No Load Input Power
  • -40 to +70 °C Operation
  • Peak Load Capability
  • 3 Year Warranty

80 Watts

Dimensions: ECE80: ECE80-S: w w w .xppow er.com 1 Models & Ratings Notes 1. Peak load lasting <30 s w ith a m axim um duty cycle of 10% , average output pow er not to exceed nom inal pow er. 2. Add suffix -S to m odel num ber to denote chassis m ount w ith screw term inal type, e.g. EC E80U S12-S. code EC E80 D IN C LIP . 4 . Average of efficiencies m easured at 25 % , 5 0% , 75 % & 100% load w ith 230 VAC input. O utput Pow er O utput Voltage O utput C urrent Efficiency (4) M odel N um ber (2,3) N om inal Peak (1) 80 W 12 .0 V 6.67 A 8.67 A 88% EC E80 U S12 80 W 15 .0 V 5 .33 A 6.93 A 88% EC E80 U S15 80 W 2 4.0 V 3.33 A 4.33 A 87 % EC E80 U S2 4 80 W 36.0 V 2 .2 2 A 2 .89 A 87 % EC E80 U S36 80 W 48.0 V 1.67 A 2 .17 A 87 % EC E80 U S48

w w w .xppow er.com 2 AC -D C Pow er Supplies Input Output C haracteristic M inim um Typical M axim um U nits N otes & C onditions O utput Voltage 12 48 VD C See M odels and Ratings table Initial Set A ccuracy 1% A t 100% load M inim um Load 0A N o m inim um load required Start U p D elay 0.5 s Start U p Rise Tim e 30 m s H old U p Tim e 8.4 15 m s A t full load and 115 VAC Line Regulation ±0.5 % Load Regulation ±1 % T ransient Response 4% Recovery w ithin 1% in less than 5 00 µs for a 2 5 % load change Ripple & N oise 1/2 % pk-pk For EC E80/EC E80-S, 2 0 M H z bandw idth O vervoltage Protection 115 140 % Vnom O verload Protection 110 185 % Short C ircuit Protection T rip & restart (hiccup m ode) T em perature C oefficient 0.02 % /˚C C haracteristic M inim um Typical M axim um U nits N otes & C onditions Input Voltage - O perating 85 2 64 VAC D erate load from 100% at 90 VAC to 90% at 85 VAC Input Frequency 47 63 H z Pow er Factor EN 61000-3-2 class A com pliant Input C urrent 1.4/0.87 A rm s A t 115 /2 30 VAC N o Load Input Pow er 0.3 W 12 -36 V versions

0.5 W 48 V version

Inrush C urrent 60/12 0 A 115 /2 30 VAC cold start at 2 5 °C Earth Leakage C urrent C lass II construction no earth Input Protection Internal T3.15 A /2 5 0 VAC fuse General C haracteristic M inim um Typical M axim um U nits N otes & C onditions Efficiency 86 87 88 % See M odels & Ratings table Isolation 3000 VAC Input to O utput Sw itching Frequency 65 kH z Pow er D ensity 11.2 W /in 3 M ean Tim e Betw een Failure >300 kH rs M IL-H D BK-2 17 F , +2 5 °C G B W eight 0.66 (2 60) lb (g) EC E80 0.7 1 (2 80) lb (g) EC E80-S Environmental C haracteristic M inim um Typical M axim um U nits N otes & C onditions O perating T em perature -40 +7 0 °C Som e specification param eters m ay not m et below -2 5 °C . D erate linearly from 100% load at +5 0 °C to 5 0% load at 7 0 °C . Storage T em perature -40 +85 °C C ooling C onvection-cooled H um idity 95 % RH N on-condensing O perating A ltitude 3048 m Vibration 2 g, 10 H z to 5 00 H z, 10 m ins/cycle, 60 m ins each cycle

w w w .xppow er.com AC -D C Pow er Supplies 3 20 Dec 16 EMC: Emissions Phenom enon Standard Test Level C riteria N otes & C onditions C onducted EN 5 5 02 2 /5 5 032 C lass B Radiated EN 5 5 02 2 /5 5 032 C lass B H arm onic C urrent EN 61000-3-2 C lass A Voltage F licker EN 61000-3-3 Safety Approvals EMC: Immunity Safety Agency Safety Standard N otes & C onditions U L U L60950-1, C SA 22.2 N o.234 per cU L TU V EN 6095 0-1 C B IEC 60950-1 Phenom enon Standard Test Level C riteria N otes & C onditions ESD EN 61000-4-2 ±6 kV/±8 kV A C ontact/A ir D ischarge Radiated EN 61000-4-3 10 V/m 80% m od A EF T EN 61000-4-4 3A Surges EN 61000-4-5 2A C onducted EN 61000-4-6 3A M agnetic F ields EN 61000-4-8 3A D ips and Interruptions EN 61000-4-11 D IP: >95 % 10 m s D IP: 30% 5 00 m s IN T: >95 % 5 000 m s A A B A t 100 VAC and 2 30 VAC Mechanical Details 1. A ll dim ensions in inches (m m ). 2 . W eight: EC E80: 0.66 lbs (2 60 g) EC E80-S: 0.7 1 lbs (2 7 0 g) Notes ECE80 3.50 (89.7) 1.87 (47.5) 0.44 (11.2) ACN ACL TOP VIEW 4x ø0.14 (4x ø3.5) 0.84 (21.3) +Vo -Vo 1.50 (38.1) 0.20 (4.7) 1.12 (28.5) 0.54 (13.8) 0.24 (6.2) 0.10 (2.5) 4.45 (113.0) 1.38 (35.0) Optional DIN clip 0.58 (14.73) ECE80 Screw Terminal (-S) 0.4 (10.2) 1.10 (28.0) 4x ø 0.06 (ø1.5) 1.80 (45.7) 0.50 (12.7) 1.18 (30.0) 0.159 (4.05) 0.139 (3.54) 3.60 (91.4) +Vo -Vo ACN ACL TOP VIEW