ECE05-10-SERIES XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • Ultra Compact Size
  • Single Outputs from 3.3 to 48 V
  • Encapsulated PCB Mount
  • <0.3 W No Load Input Power
  • Peak Load Capability
  • No External Components Required
  • 3 Year Warranty ECE Series Input Input Voltage • 85-264 VAC (120-370 VDC) derate load from 100% at 90 VAC to 90% at 85 VAC Input Frequency • 47-63 Hz Input Current • ECE05: 0.1 A rms at 230 VAC ECE10: 0.2 A rms at 230 VAC Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC, cold start at 25 °C Power Factor • EN61000-3-2 Class A Earth Leakage Current • Class II construction no earth No Load Input Power • <0.3 W Input Protection • Internal T1 A/250 VAC fuse Output Output Voltage • See tables Initial Set Accuracy • ±1% Minimum Load • No minimum load required Start Up Delay • 2 s max Start Up Rise Time • 25 ms max Hold Up Time • 8 ms/40 ms typical at full load and 115/230 VAC Line Regulation • ±0.5% max Load Regulation • ±1% max Transient Response • 4% max deviation, recovery to within 1% in 500 µs for a 25% load change Ripple & Noise • 3.3-5 V versions: 60 mV pk-pk, all other models 1% pk-pk max 20 MHz bandwidth Overvoltage Protection• 125-190%, 195-216% ECE10US03 Overload Protection • 125-190% Short Circuit Protection• Trip and restart (hiccup mode) Temperature • 0.05%/°C Coefficient xppower.com General Efficiency • See tables Isolation • 4000 VAC Input to Output Switching Frequency • 130 kHz typical Power Density • ECE05: 8.3 W/In3 ECE10: 11.1 W/In3 MTBF • >450 kHrs to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature• -25 °C to +70 °C, derate linearly from 100% at +50 °C to 50% at +70 °C Cooling • Convection-cooled Operating Humidity • 95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3048 m, 10,000 ft Vibration • 2 g, 10 Hz to 500 Hz, 10 mins/cycle, 60 mins each cycle EMC & Safety Emissions • EN55022, level B conducted & radiated* Harmonic Currents • EN61000-3-2, EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Radiated Immunity • EN61000-4-3, 10 V/m 80% mod Perf Criteria A EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Surge • EN61000-4-5, installation Class 3, Perf Criteria A Conducted Immunity • EN61000-4-6, 10 Vrms Perf Criteria A Magnetic Fields • EN61000-4-8, 10 A/m Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% for 10 ms, 60% for 100 ms, 100% for 5000 ms Perf Criteria A, B, B Safety Approvals • EN60950-1, UL60950-1, CSA22.2 No. 234 per cUL Notes * If output is connected to GND, please contact applications engineering for further information.

1.00 (25.4) 0.817 (20.76)0.10 (2.7) 1.00 (25.4) 0.15 (3.9) 0.85 (21.59) 0.123 (3.13) 0.60 (15.24) 0.2 (5.08) 0.02 (ø0.5) 0.072 (1.84) 0.40 (10.16) Bottom View 1.00 (25.4) 0.10 (2.54) 0.10 (2.54) 0.50 (12.7) 1.5 (38.1) 1.3 (33.02) 0.2 (5.08) ø0.04 (ø1.0) 0.1 (2.54) ø0.07 (ø1.8) ø0.04 (ø1.0) 0.059 (1.5) max 0.173 (4.4)0.15 (3.8) 0.03 (0.8) 1.4 (35.56) 1.3 (33.02)0.065 (1.65) 0.50 (12.7) 0.75 (19.05) 0.93 (23.7) 0.469 (11.9) max 0.065 (1.65) 0.94 (23.9) 0.817 (20.76) 0.07 (1.95) 0.94 (23.9) 0.84 (21.5) 0.15 (3.9) 0.85 (21.59) 0.45 (11.43) 0.05 (1.27) 0.47 (12.0) max 0.04 (1.0) 0.04 (1.0) 0.61 (15.5) Mechanical Details ECE05 ECE05-P ECE10 ECE10-P Models and Ratings Output Power Output Voltage Output Current Efficiency(3) Model Number (2) Nominal Peak(1) 5.0 W 3.3 VDC 1.51 A 1.96 A 74% ECE05US03 5.0 W 5.0 VDC 1.00 A 1.30 A 80% ECE05US05 5.0 W 9.0 VDC 0.55 A 0.71 A 82% ECE05US09 5.0 W 12.0 VDC 0.41 A 0.53 A 82% ECE05US12 5.0 W 15.0 VDC 0.33 A 0.43 A 84% ECE05US15 5.0 W 24.0 VDC 0.21 A 0.27 A 83% ECE05US24 5.0 W 48.0 VDC 0.10 A 0.13 A 85% ECE05US48 8.6 W 3.3 VDC 2.60 A 3.38 A 77% ECE10US03 10.0 W 5.0 VDC 2.00 A 2.60 A 80% ECE10US05 10.0 W 9.0 VDC 1.11 A 1.44 A 82% ECE10US09 10.0 W 12.0 VDC 0.83 A 1.08 A 83% ECE10US12 10.0 W 15.0 VDC 0.66 A 0.86 A 82% ECE10US15 10.0 W 24.0 VDC 0.41 A 0.53 A 83% ECE10US24 10.0 W 48.0 VDC 0.21 A 0.27 A 83% ECE10US48 Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal power. 2. Add suffix-P to model number to denote open frame version. Available for OEM quantities. 3. Efficiencies measured at 100% load with 115 VAC input. 1. All dimensions in inches (mm). 2. Weight: ECE05: 0.035 lbs (16 g) ECE10: 0.053 lbs (24 g) ECE05-P: 0.022 lbs (10 g) ECE10-P: 0.031 lbs (14 g) 4. ECE05: The solder pads for pins 1 & 2 should have a maximum diameter of 1.3mm to ensure that the creepage requirements of IEC60950 are met. Notes Pin Function

1 ACN

2 ACL

5 +VoutSee note. 4 See note. 4