EC3SM1 ECLIPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234

DATE: June 23 rd, 2006 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective July 1 st, 2006: Series Description Recommended Replacement EC3SM1 Four pad SMD Crystal EC3SM EC4SM1 Four pad SMD Crystal EC4SM In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 31 st, 2006, with delivery to conclude by December 31st 2006. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation

  • Four pad surface mount package
  • AT or BT cut available
  • Resistance weld seal
  • Tight tolerance/stability
  • Interchangeable with plastic surface mount crystals
  • Tape and reel available CRYSTAL EC3SM1 H 5.18 L 12.50 W 4.95 ELECTRICAL SPECIFICATIONS MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP . CRYSTAL EC3SM1 EPOXY BASE CR34 06/06 EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT NOTES Mode / Cut Fundamental / AT Fundamental / BT Nominal Frequency 4.000MHz 7 .3728MHz 20.000MHz ESR (Ω)

40 Max

ESR (Ω)

200 Max

120 Max

50 Max

Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25°C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (C Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Nominal Frequency 30.000MHz 30.000MHz 4.000MHz, 7 .3728MHz, 20.000MHz, and 30.000MHz ±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm (AT cut only), ±15ppm / ±30ppm (AT cut only), or ±15ppm / ±20ppm (AT cut only) 0°C to 70°C (Standard), -20°C to 70°C (AT cut only), or -40°C to 85°C (AT cut only) ±5ppm / year Maximum -40°C to 85°C 7pF Maximum

500 Megaohms Minimum at 100V

18pF (Standard), Custom C L ≥10pF, or Series Resonant 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.

ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONSENVIRONMENTAL/MECHANICAL SPECIFICATIONS MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP . CRYSTAL EC3SM1 EPOXY BASE CR34 06/06 EC3SM1 - B - 20 - 30.000M TR PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT B=Fundamental / BT SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Tolerances = ±0.2 M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN R S T U V QTY/REEL 2.5 MIN 10 MIN 30.4 MAX 360 MAX 24.4+2-0 1,000 REEL A B C D E F G H J K L TAPE *Compliant to EIA-481A Line 1: E XX.XXX Frequency in MHz (5 Digits Maximum + Decimal) 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PARAMETER SPECIFICATION Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-883, Method 2007 , Condition A Solderability MIL-STD-883, Method 2002 Temperature Cycling MIL-STD-883, Method 1010 Resistance to Soldering Heat MIL-STD-883, Method 210 Resistance to Solvents MIL-STD-883, Method 215 FREQUENCY TOLERANCE / STABILITY Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C A=±50ppm at 25°C, ±100ppm from -20°C to 70°C B=±50ppm at 25°C, ±100ppm from -40°C to 85°C C=±30ppm at 25°C, ±50ppm from 0°C to 70°C D=±30ppm at 25°C, ±50ppm from -20°C to 70°C E=±30ppm at 25°C, ±50ppm from -40°C to 85°C F=±15ppm at 25°C, ±30ppm from 0°C to 70°C G=±15ppm at 25°C, ±30ppm from -20°C to 70°C J=±15ppm at 25°C, ±20ppm from 0°C to 70°C Coplanarity: 0.152 Maximum