EC20 ECLIPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234

DATE: December 27 th, 2006 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective December 27 th, 2006: Series Description Recommended Replacement EC20 3.3V 14 pin DIP Oscillator EB52F3 or EB52F5 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after March 31 st, 2007, with delivery to conclude by June 30th 2007. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation

MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR EC20 14 pin DIP 3.3V OS61 08/06 EC20 Series

  • RoHS Compliant (Pb-free)  HCMOS output  3.3V supply voltage  14 pin DIP package  Stability to ±5ppm  Custom lead length, gull wing options available ELECTRICAL SPECIFICATIONS EC20 OSCILLATOR 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. 1.000MHz to 20.000MHz 20.001MHz to 50.000MHz vs. Operating Temperature Range vs. Input Voltage ( V DD ±5%) vs. Load (±2pF) w/HCMOS Load w/HCMOS Load 10% to 90% of Waveform < 20.000MHz 10% to 90% of Waveform > 20.000MHz at 50% of Waveform V IH: No Connection VIH: ≥2.2VDC VIL: ≤0.8VDC Frequency Range (MHz) Operating Temperature Range Storage Temperature Range Supply Voltage (V DD) Input Current Frequency Tolerance / Stability Internal Trim (Top of Can) Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Tri-State Input Voltage Aging (at 25°C) Start Up Time Period Jitter: Absolute Period Jitter: One Sigma 1.000MHz to 50.000MHz Per Table 1 -55°C to 125°C 3.3V DC ±10% 10mA Maximum 20mA Maximum Per Table 1 ±2.0ppm Maximum ±1.0ppm Maximum ±5ppm Minimum 2.7V DC Minimum I OH = -8mA 0.5VDC Maximum I OL = +8mA 10 nSeconds Maximum 6 nSeconds Maximum 50 ±10(%) (Standard) or 50 ±5(%) (Optional) 15pF HCMOS Load Enables Output Enables Output Disables Output: High Impedance ±1ppm / year Maximum 10 mSeconds Maximum ±100pSeconds Maximum ±25pSeconds Maximum H 8.0 L 20.8 W 13.2

ECLIPTEK CORP . OSCILLATOR EC20 14 pin DIP 3.3V OS61 08/06 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE EC20 07 A R T TS - 24.000M - CL125 FREQUENCY STABILITY

2 Digit Code Per Table 1

OPERATING TEMPERATURE RANGE

1 Letter Code Per Table 1

Blank=No Internal Trim R=±5ppm Minimum (Top of Can) DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State Enable High PART NUMBERING GUIDE Line 1: ECLIPTEK Line 2: EC20 TS Output Control Function TS = Tri-State Enable High Series Designator Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Characteristic Specification Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-883, Method 2007 , Condition A Lead Integrity MIL-STD-883, Method 2004 Solderability MIL-STD-883, Method 2002 Temperature Cycling MIL-STD-883, Method 1010 Resistance to Soldering Heat MIL-STD-883, Method 210 Resistance to Solvents MIL-STD-883, Method 215 Pin 1: Tri-State Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.