EC33 ECLIPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234

DATE: September 20 th, 2006 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective September 20 th, 2006: Series Description Recommended Replacement EC33 2.5V 4 pad SMD Plastic Oscillator EC27 or EC37 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after March 31 st, 2007, with delivery to conclude by September 30th 2007. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation

MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR EC33 PLASTIC 2.5V OS93 08/06 EC33 Series

  • Plastic surface mount package  2.5V supply voltage  HCMOS output  Stability to ±50ppm  Available on tape and reel OSCILLATOR EC33 NOTES ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 1.544MHz to 32.768MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 2.5V DC ±5% Aging (at 25°C) ±5ppm / year Maximum Input Current ≤24.000MHz 10mA Maximum >24.000MHz 20mA Maximum Frequency Tolerance / Stability* Inclusive of Operating Temperature Range, ±1 00ppm Maximum or Supply Voltage, and Load ±50ppm Maximum (0°C to 70°C only) Output Voltage Logic High (V OH) 90% of V DD Minimum IOH = -4mA Output Voltage Logic Low (VOL) 10% of V DD Maximum IOL = +4mA Rise Time / Fall Time ≤24.000MHz 20% to 80% of Waveform 6 nSec Maximum >24.000MHz 20% to 80% of Waveform 4 nSec Maximum Duty Cycle at 50% of Waveform 50 ±10(%) (Standard) or 50 ±5(%) (Optional) Load Drive Capability 15pF HCMOS Load Maximum Tri-State Input Voltage No Connection Enables Output V IH :≥90% of VDD Enables Output V IL :≤10% of VDD Disables Output: High Impedance Start Up Time 10 mSeconds Maximum Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. H 4.7 L 14.0 W 9.8

EC33 00 SJ ET T TS - 25.000M TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum OPERATING TEMP. RANGE Blank=0°C to 70°C ET=-40°C to 85°C DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel (Standard) FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State Enable High PART NUMBERING GUIDE A B C D E F F G H J K L TAPE MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR EC33 PLASTIC 2.5V OS93 08/06 MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONSENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum (internal crystal only). Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Pin 1: Tri-State Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS Tolerances = ±0.1 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. REEL *Compliant to EIA 481A M

1.5 MIN

N

50 MIN

O

20.2 MIN

P 13±.2 Q

40 MIN

S

10 MIN

R

2.5 MIN

T

30.4 MAX

U

360 MAX

V 24.4+2-0 QTY/REEL 1000