EC14 ECLIPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234

DATE: September 20 th, 2006 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective September 20 th, 2006: Series Description Recommended Replacement EC14 5V 4 pad SMD Plastic Oscillator EP14 or EH14 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after March 31 st, 2007, with delivery to conclude by September 30th 2007. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation

MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR EC14 PLASTIC 5.0V OS33 08/06 EC14 Series

  • Plastic surface mount package  5.0V supply voltage  HCMOS/TTL output  Stability to ±50ppm  Available on tape and reel OSCILLATOR EC14 H 4.7 L 14.0 W 9.8 ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 1.000MHz to 66.667MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C (<30.000MHz) Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 5.0V DC ±10% Frequency Tolerance / Stability* Inclusive of Operating Temperature Range, ±100ppm Maximum or Supply Voltage, and Load ±50ppm Maximum (0°C to 70°C Only) Input Current <30.000MHz 23mA Maximum (Unloaded) 30.001MHz to 50.000MHz 35mA Maximum (Unloaded) >50.000MHz 50mA Maximum (Unloaded) Load Drive Capability <53.125MHz 10TTL Load or 50pF HCMOS Load >53.125MHz 15pF HCMOS Load Output Voltage Logic High (V OH) w/TTL Load 2.4V DC Minimum I OH = -16mA w/HCMOS Load V DD-0.5VDC Minimum I OH = -16mA Output Voltage Logic Low (VOL) w/TTL Load 0.4V DC Maximum I OL = +16mA w/HCMOS Load 0.5V DC Maximum I OL = +16mA Duty Cycle at 50% of waveform w/HCMOS Load at 1.4V DC w/TTL Load 50 ±10(%) (Standard) at 1.4V DC w/HCMOS Load or w/TTL Load 50 ±5(%) (Optional) Rise Time / Fall Time 20% to 80% of waveform w/HCMOS Load; 8 nSeconds Maximum 0.4V DC to 2.4VDC w/TTL Load Aging (at 25°C) ±5ppm / year Maximum Tri-State Input Voltage No Connection Enables Output V IH :≥2.0VDC Enables Output V IL :≤0.8VDC Disables Output: High Impedance Start Up Time 1.000MHz to 26.000MHz 4 mSeconds Maximum 26.001MHz to 66.667MHz 10 mSeconds Maximum Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.

EC14 00 SJ ET T TS - 25.000M TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum OPERATING TEMP. RANGE Blank=0°C to 70°C ET=-40°C to 85°C DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel (Standard) FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State Enable High PART NUMBERING GUIDE Pin 1: Tri-State Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage A B C D E F G H J K L TAPE M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN R S T U V QTY/REEL 2.5 MIN 10 MIN 30.4 MAX 360 MAX 24.4+2-0 1,000 REEL *Compliant to EIA 481A Characteristic Specification Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum (internal crystal only). Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR EC14 PLASTIC 5.0V OS33 08/06 MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONSENVIRONMENTAL/MECHANICAL SPECIFICATIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS Tolerances = ±0.1 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.