E5530 TEMIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
causes no phase shift. The carrier frequency is RF/2. period, while a logical “0” causes negative edge. table “Transmission Options”. Figure 5. Timing diagram for modulation options Stresses above those listed under ‘Absolute Maximum Ratings’ may cause permanent damage to the device. Functional operation of the device at these conditions is not imlied.
Rev. A3, 17-Sep-98 5 (5) Application Example I 125 kHz Coil1 (Pin 8) Coil2 (Pin 1) 2.2 nF To read amplifier e5530 390 pF4.05 mHFrom oscillator Energy Data fres/C00431 2/C0112LC/C0504/C0043125 kHz 13369 AC 740 /C0109H Input capacitance 5 pF static, 4 pF dynamic (SO8) Figure 8. Typical application circuit
Package Information
5.00 4.85 0.4 1.27 3.81 1.4 0.25 0.10 5.2 4.8 3.7 3.8 6.15 5.85 0.2 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. TEMIC Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2594, Fax number: 49 (0)7131 67 2423