E3U ECLIPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234

DATE: January 28 th, 2008 TO: All Sales Personnel FROM: Isaac Gonzalez RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective January 28 th, 2008: Series Description Recommended Replacement E3U RoHS Compliant (Pb-free) Resistance Welded HC-49/UST Crystal E2S In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after July 28 th, 2008, with delivery to conclude by October 28th, 2008. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation

  • RoHS Compliant (Pb-Free)  HC-49/UST package  AT or BT cut available  Resistance weld seal  Tight tolerance/stability  Insulator tab, and custom lead length options available CRYSTAL E3U ELECTRICAL SPECIFICATIONS MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP . CRYSTAL E3U HC-49/UST CR45 03/04 EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT NOTES Frequency Range 3.579545MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 7 .999MHz 8.000MHz to 8.999MHz 9.000MHz to 9.999MHz 10.000MHz to 14.999MHz ESR (Ω)

60 Max

50 Max

40 Max

150 Max

100 Max

ESR (Ω)

200 Max

120 Max

90 Max

80 Max

70 Max

15.000MHz to 15.999MHz 16.000MHz to 23.999MHz 24.000MHz to 29.4912MHz 24.000MHz to 40.000MHz 28.6363MHz to 29.999MHz 30.000MHz to 50.000MHz Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / BT Third Overtone / AT Third Overtone / AT 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. H 3.68 L 11.18 W 4.70 Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25°C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (C Drive Level Dependancy (DLD2) Spurious Response 3.579545MHz to 50.000MHz ±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm (AT cut only), ±15ppm / ±30ppm (AT cut only), ±15ppm / ±20ppm (AT cut only), or ±10ppm / ±15ppm (AT cut only) 0°C to 70°C (Standard), -20°C to 70°C (AT cut only), or -40°C to 85°C (AT cut only) ±5ppm / year Maximum -40°C to 85°C 7pF Maximum

500 Megaohms Minimum at 100V

18pF (Standard), Custom C L ≥10pF, or Series Resonant 20% of Maximum ESR Limit (from 1µWatt to 1000µWatts) >3dB from Fo to Fo +5000ppm

ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONSENVIRONMENTAL/MECHANICAL SPECIFICATIONS MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP . CRYSTAL E3U HC-49/UST CR45 03/04 E3U A A 18 - 30.000M - I2 AVAILABLE OPTIONS Blank=None (Std) CD=Custom Lead Length (3.810 ±0.500mm) CE=Custom Lead Length (4.445 ±0.500mm) I2=Insulator Tab FREQUENCY LOAD CAPACITANCE S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT A=Fundamental / AT B=Third Overtone / AT D=Fundamental / BT Line 1: E XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. NOTES Pin 1: Input/Output Pin 2: Case Ground Pin 3: Input/Output FREQUENCY TOLERANCE / STABILITY A=±50ppm at 25°C, ±100ppm from 0°C to 70°C B=±50ppm at 25°C, ±100ppm from -20°C to 70°C C=±50ppm at 25°C, ±100ppm from -40°C to 85°C D=±30ppm at 25°C, ±50ppm from 0°C to 70°C E=±30ppm at 25°C, ±50ppm from -20°C to 70°C F=±30ppm at 25°C, ±50ppm from -40°C to 85°C G=±15ppm at 25°C, ±30ppm from 0°C to 70°C H=±15ppm at 25°C, ±30ppm from -20°C to 70°C J=±15ppm at 25°C, ±30ppm from -40°C to 85°C K=±15ppm at 25°C, ±20ppm from 0°C to 70°C L=±15ppm at 25°C, ±20ppm from -20°C to 70°C M=±15ppm at 25°C, ±20ppm from -40°C to 85°C N=±10ppm at 25°C, ±15ppm from 0°C to 70°C P=±10ppm at 25°C, ±15ppm from -20°C to 70°C PARAMETER SPECIFICATION Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Lead Integrity MIL-STD-883, Method 2004 Lead Termination Sn 2µm - 6µm Mechanical Shock MIL-STD-202, Method 213, Condition C Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2002 Temperature Cycling MIL-STD-883, Method 1010 Vibration MIL-STD-883, Method 2007 , Condition A * Frequency Tolerance/Stability options M, N, and P are only available with frequencies greater than 10.000MHz