E3623RGB HARVATEK | Alldatasheet
Document overview
- Manufacturer or author: Meicer
- PDF pages: 15
Technical content
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 1/15 Harvatek Surface Mount CHIP LED Data Sheet E3623RGB-10D-0002H4
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 2/15
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 3/15 DISCLAIMER HARVATEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. HARVATEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY HARVATEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of HARVATEK or HARVATEK INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 4/15 Product Specifications Specification Material Quantity Iv R : Max:120mcd;min:80 mcd G : Max:450 mcd;min:310 mcd B : Max:90mcd;min:40 mcd R/G/B@10mA/ Ts= 25O C;Tolerance ±10% WD R : Max:635nm;min:615nm G : Max:535nm;min:515nm B : Max:475nm;min:455nm R/G/B@10mA/ Ts= 25O C;Tolerance ± 0.5nm Vf R : Max:2.40V;min:1.60V G : Max:3.30V;min:2.70V B : Max:3.80V;min:2.80V R/G/B@10mA/ Ts= 25O C;Tolerance ± 0.05V Ir/Vr R:0~1uA@ VR=5V G: >500uA @ VR=0.8V B:<100uA@ VR=5V Resin Diffused Epoxy Carrier tape EIA 481-1A specs Conductive black tape 4000pcs/reel Reel EIA 481-1A specs Conductive black Label HT standard Paper Packing bag 250x230mm Aluminum laminated bag/ no-zipper One reel per bag Carton HT standard Paper Non-specified
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 5/15 Others: Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same bin combinations of Iv, λD and Vf. Each reel has a label identifying its specification; the immediate box consists of a product label as well. Note :This is shipped test conditions ※Remarks: This product should be operated in forward bias. If a reverse voltage is continuously applied to the product, such operation can cause migration resulting in LED damage. ATTENTION: Electrostatic Discharge (ESD) protection The symbol to the left denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP , GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly. If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process. Label Specifications
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 6/15 ■Harvatek P/N: E 362 3 RGB- 10D- 0002 H4 ■ Lot No.: Product Dice Current Taping PCB+Zener 3: Tri 10mA 1. Taping style 2. Q’ty Package Color Series Number 1.6(L)x1.5(W)x0.5(H) mm RGB: Full color X001~XZZZ
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 7/15 Bin code ▓ Luminous Intensity (Iv) E3623RGB @10 mA bin code IV Red Green Blue FA1 80 120 FB1 310 450 FC2 40 90 Note: It maintains a tolerance of ±10% on IV ▓ Dominant Wavelength (WD) E3623RGB @10 mA bin code WD Red Green Blue R1 615 635 G1 515 535 B11 455 465 B12 465 475 Note: It maintains a tolerance of ±0.5nm on WD ▓ Forward Voltage (Vf) E3623RGB @10 mA bin code Vf Red Green Blue Note: It maintains a tolerance of ±0.05V on Vf
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 8/15 Product Features Electro-Optical Characteristics (TSoldering, 25 oC) Part number Emitting Forward Wavelength V(mcd) IF(mA) Viewing Angle 2θ1/2 Color Voltage(VF) (nm) typ. typ. max. λD λp Δλ min. typ. E3623RGB-10 Ultra Bright Red 1.9 2.4 621 630 16 80 100 140 Green 2.9 3.3 528 521 32 310 360 Blue 3.2 3.8 468 463 21 40 65 Unit: mm Tolerance: +/-0.05 Outline Dim. Soldering Pattern Soldering terminals may shift in the x, y direction. Absolute Maximum Ratings (TSoldering 25 oC) Series PD (mW) IF (mA) IFP (mA)* TOP (oC) TST (oC) Color Power Dissipation Forward Current Pulse Forward Current Operating Temperature Storage Temperature Red 30 10 30 -40~+85 -40~+100 Green 35 10 30 -40~+85 -40~+100 Blue 33 10 30 -40~+85 -40~+100 * Condition for IFP is pulse of 1/10 duty and 0.1msec width
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 9/15 Characteristics of E3623RGB Relative Intensity vs. Forward Wavelength Forward Voltage vs. Forward Current Forward Current vs. Soldering Temperature Relative Intensity vs. Forward Current Directive Characteristics
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 10/15 Precaution for Use 1. The chips should not be used directly in any type of fluid such as water, oil, organic solvent, etc. 2. When the LEDs are illuminating, the maximum ambient temperature should be first considered before operation. 3. LEDs must b e stored in a clean environment. A sealed container with a nitrogen atmosphere is necessary if the storage period is over 3 months after shipping. 4. The LEDs must be used within 4 weeks after unpacked. Unused products must be repacked in an anti-electrostatic package, folded to close any opening and then stored in a dry and cool space. 5. The appearance and specifications of the products may be modified for improvement without further notice. 6. The LEDs are sensitive to the static electricity and surge. It is strongly recommended to use a grounded wrist band and anti -electrostatic glove when handling the LEDs. If a voltage over the absolute maximum rating is applied to LEDs, it will damage LEDs. Damaged LEDs will show some abnormal characteristics such as remarkabl e increase of leak current, lower turn-on voltage and getting unlit at low current.
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 11/15 Packaging Tape Dimension Dim. A Dim. B Dim. C Q’ty/Reel Unit: mm
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 12/15 Reel Dimension Packing 5 boxes per carton is available depending on shipment quantity.
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 13/15 Dry Pack All SMD optical devices are MOISTURE SENSITIVE. Avoid exposure to moisture at all times during transportation or storage. Every reel is packaged in a moisture protected anti-static bag. Each bag is properly sealed prior to shipment. A humidity indicator will be included in the moisture protected anti-static bag prior to shipment. The packaging sequence is as follows: Baking Baking before soldering is recommended when the package has been unsealed for 4 weeks. The conditions are as followings: 1. 60±3℃×(12~24hrs)and<5%RH, taped reel type. 2. 100±3℃×(45min~1hr), bulk type. 3. 130±3℃×(15min~30min), bulk type. Precautions 1. Avoid exposure to moisture at all times during transportation or storage. 2. Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products. 3. It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid applying a reverse voltage beyond the specified limit. 4. Avoid operation beyond the limits as specified by the absolute maximum ratings. 5. Avoid direct contact with the surface through which the LED emits light. 6. If possible, assemble the unit in a clean room or dust-free environment.
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 14/15 Reflow Soldering Recommend soldering paste specifications: 1. Operating temp.: Above 220 OC ,60sec 2. Peak temp.:260 OCMax.,10sec Max. 3. Reflow soldering should not be done more than two times. 4. Never attempt next process until the component is cooled down to room temperature after reflow. 5. The recommended reflow soldering profile (measured on the surface of the LED terminal) is as following: 6. Lead-free Solder Profile. Reworking Rework should be completed within 5 seconds under 260 OC. The iron tip must not come in contact with the copper foil. Twin-head type is preferred. Cleaning Following are cleaning procedures after soldering: An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended. Temperature x Time should be 50oC x 30sec. or <30oC x 3min Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter Curing: 100 OC max, <3min
Official Product HT Part No. E3623RGB-10D-0002H4 Specifications are subject to changes for improvement without advance notice. Proprietary data, drawings, company confidential all rights reserved. 07/04/2017 Version 1.3 Page 15/15 Cautions of Pick and Place Avoid stress on the resin at elevated temperature. Avoid rubbing or scraping the resin by any object. Electric-static may cause damage to the component. Please ensure that the equipment is properly grounded. Use of an ionizer fan is recommended. Revise History Rev. Descriptions Date Page 1.0 - 10/06/2016 -