E32D1 ECLIPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR E32D1 CERAMIC 3.3V OS3Y 01/09 E32D1 Series OSCILLATOR E32D1 ELECTRICAL SPECIFICATIONS 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.

  • RoHS Compliant (Pb-Free)  PECL Output Oscillators  3.3V supply voltage  Ceramic 6-pad SMD Package  Stability to ±25ppm  Tri-State Output  Complementary Output  Available on Tape and Reel H 2.0 L 7.0 W 5.0 0°C to 70°C -40°C to 85°C -55°C to 125°C 3.3V DC ±5% 100mA Maximum ±50ppm or ±25ppm Maximum V CC-1.025VDC Minimum VCC-1.620VDC Maximum 1.5 nSeconds Maximum 50 ±10(%) 50 ±5(%)

50 Ohms into V

CC-2.0VDC 1.65VDC ±1.65VDC 0.0VDC to VCC +0.5VDC ±75ppm Minimum 20%, 15%, or 10% Maximum Positive Transfer Characteristic 10kHz Minimum 50kOhms Typical -55dBc/Hz -90dBc/Hz -120dBc/Hz -140dBc/Hz -145dBc/Hz -148dBc/Hz Tri-State Enable Low / Complementary Output Disables Outputs: High Impedance Enables Output Enables Output 0.4pSec Typical, 1pSec Maximum 4pSec Typical, 5pSec Maximum 3pSec Typical, 5pSec Maximum 3pSec Typical, 5pSec Maximum 4pSec Typical, 10pSec Maximum 27pSec Typical, 40pSec Maximum 10 mSeconds Maximum Frequency Range (MHz) Operating Temperature Range Storage Temperature Range Supply Voltage (V CC) Input Current Frequency Tolerance / Stability Output Voltage Logic High (V OH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Control Voltage (V Control Voltage Range (VCR) Frequency Deviation Linearity Transfer Function Modulation Bandwidth (MBW) Input Impedance (Z Typical Phase Noise (Fo = 155.520MHz) Logic Control/Additional Output Tri-State Input Voltage RMS Phase Jitter Accumulated Period Jitter (t acc) Period Jitter (trj) Period Jitter (trms) Period Jitter (tdj) Period Jitter (tp-p) Start Up Time With Load Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging, Shock, and Vibration 20% to 80% of waveform at 50% of waveform Test Conditions for Frequency Deviation Inclusive of Operating Temperature Range, Supply Voltage Change, and Output Load Change Measured at -3dB with Contol Voltage of +1.65V DC at 10Hz Offset at 100Hz Offset at 1kHz Offset at 10kHz Offset at 100kHz Offset at 1MHz Offset V IH of 70% of VCC Minimum No Connection V IL of 30% of VCC Maximum FJ = 12kHz to 20MHz Sigma of Total Jitter Distribution Sigma of Random Jitter Sigma of Total Jitter Distribution Deterministic Jitter Peak to Peak of Jitter Distribution

Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR E32D1 CERAMIC 3.3V OS3Y 01/09 MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. E32D1 E E A 2 K - 155.520M TR PART NUMBERING GUIDE AVAILABLE OPTIONS Blank=Bulk TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL / ADDITIONAL OUTPUT K=Tri-State (Enable Low) / Complementary Output DUTY CYCLE 1=50% ±10% 2=50% ±5% FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C H=±50ppm Maximum over -40°C to +85°C FREQUENCY DEVIATION E=±75ppm Minimum LINEARITY A=20% Maximum B=15% Maximum C=10% Maximum A B C D E F F G H J K L TAPE M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN R S T U V QTY/REEL 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 1,000 REEL *Compliant to EIA 481A Tolerances= +0.1 Characteristic Specification Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-883, Method 2007 , Condition A Solderability MIL-STD-883, Method 2002 Temperature Cycling MIL-STD-883, Method 1010 Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 Pin 1: Voltage Control Pin 2: Tri-State Pin 3: Case Ground Pin 4: Output Pin 5: Complementary Output Pin 6: Supply Voltage