DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

w .moxa.com ioLogik E2200 Series Smart Ethernet remote I/O with Click&Go Logic Features and Benefits

  • Front-end intelligence with patented Click&Go control logic, up to 24 rules
  • Active communication with MX-AOPC UA Server
  • Saves time and wiring costs with peer-to-peer communications
  • Supports SNMP v1/v2c/v3
  • Friendly configuration via web browser
  • Simplifies I/O management with MXIO library for Windows or Linux
  • Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments Certifications Introduction Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods. PC-Free Alarm and Control Intelligence This device supports simple yet powerful Click&Go™ technology to configure event-driven reports and alarms delivered over email, TCP/ UDP, or SNMP traps, giving you a powerful and effective tool for delivering timestamped status updates in real time. With built-in Click&Go™ intelligence, this device can be configured for simple outputs paired up with simple input triggers without the need for a PC controller. This allows it to be configured to automatically report I/O events according to conditions specified by the user. SNMP for Ethernet Device Management By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and transportation.

w .moxa.com Push Technology for Events and Alarms When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred. Specifications Control Logic Language Click&Go Input/Output Interface Analog Input Channels ioLogik E2240 Series: 8 ioLogik E2242 Series: 4 Analog Output Channels ioLogik E2240 Series: 2 Configurable DIO Channels (by software) ioLogik E2212 Series: 4 ioLogik E2242 Series: 12 Digital Input Channels ioLogik E2210 Series: 12 ioLogik E2212 Series: 8 ioLogik E2214 Series: 6 Digital Output Channels ioLogik E2210/E2212 Series: 8 ioLogik E2260/E2262 Series: 4 Relay Channels ioLogik E2214 Series: 6 RTD Channels ioLogik E2260 Series: 6 Thermocouple Channels ioLogik E2262 Series: 8 Buttons Reset button Isolation 3k VDC or 2k Vrms Rotary Switch 0 to 9 Digital Inputs Connector Screw-fastened Euroblock terminal Counter Frequency 900 Hz Digital Filtering Time Interval Software configurable Dry Contact On: short to GND Off: open I/O Mode DI or event counter Points per COM ioLogik E2210 Series: 12 channels ioLogik E2212/E2242 Series: 6 channels ioLogik E2214 Series: 3 channels

w .moxa.com Sensor Type ioLogik E2210 Series: Dry Contact and Wet Contact (NPN) ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP) Wet Contact (DI to GND) On: 0 to 3 VDC Off: 10 to 30 VDC Digital Outputs Connector Screw-fastened Euroblock terminal Current Rating 200 mA per channel I/O Mode DO or pulse output I/O Type Sink Over-Current Protection 0.65 A per channel @ 25°C Over-Temperature Shutdown 175°C (min.) Over-Voltage Protection 45 VDC (typical) Pulse Output Frequency 1 kHz DIO Output Leakage Current 4.0 mA @ 24 VDC Relays Connector Screw-fastened Euroblock terminal Contact Current Rating Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC Contact Resistance 100 milli-ohms (max.) Electrical Endurance 100,000 operations @ 5 A resistive load Mechanical Endurance 1,000,000 operations Minimum Permitted Load 1 A @ 5 VDC Pulse Output Frequency 0.3 Hz at rated load Type Form A (N.O.) power relay I/O Mode Relay or pulse output Note Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C. Analog Inputs Accuracy ioLogik E2240/E2242: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C ioLogik E2240-T/E2242-T: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C ±0.5% FSR @ -40 to 75°C Connector Screw-fastened Euroblock terminal I/O Mode Voltage/Current I/O Type Differential Input Impedance ioLogik E2240 Series: 900 kilo-ohms (min.) ioLogik E2242 Series: 200 kilo-ohms (min.)

w .moxa.com Input Range ioLogik E2240 Series: ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA, 4 to 20 mA ioLogik E2242 Series: ±150 mV, 0 to 150 mV, ±500 mV, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA Resolution 16 bits Sampling Rate ioLogik E2240 Series: All Channels: 10 samples/sec for voltage; 6 samples/sec for current Per Channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current Single channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current ioLogik E2242 Series: All channels: 32 samples/sec Per channel: 8 samples/sec Single channel: 100 samples/sec Built-in Resistor for Current Input 120 ohms Over-Voltage Protection -25 to +30 VDC (power on) -35 to +35 VDC (power off) Analog Outputs Accuracy ioLogik E2240: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C ioLogik E2240-T: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C ±0.5% FSR @ -40 to 75°C Output Range 0 to 10 VDC 4 to 20 mA Resolution 12-bit Load (Current Mode) Internal power: 250 ohms (max.) RTDs Accuracy ioLogik E2260: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C ioLogik E2260-T: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C ±0.5% FSR @ -40 to 75°C Connector Screw-fastened Euroblock terminal Input Connection 2- or 3-wire Input Impedance 625 kilo-ohms (min.) Sensor Type JPT100, JPT200, JPT500 (-200 to 640°C) JPT1000 (-200 to 350°C) NI100, NI200, NI500 (-60 to 250°C) NI1000 (-60 to 150°C) NI120 (-80 to 260°C) PT1000 (-200 to 350°C) PT50, PT100, PT200, PT500 (-200 to 850°C) Resistance of 310, 620, 1250, and 2200 ohms Resolution 0.1°C or 0.1 ohms Sampling Rate All channels: 12 samples/sec Per channel: 2 samples/sec

w .moxa.com Thermocouples Millivolt Accuracy ioLogik E2262: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C ioLogik E2262-T: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C ±0.5% FSR @ -40 to 75°C TC Accuracy Types J, T, E, S, B: ±5°C Types K, R, N: ±8°C CJC Accuracy ±0.5°C @ 25°C Connector Screw-fastened Euroblock terminal Input Impedance 1 mega-ohms (min.) Millivolt Type ±19.532 mV ±39.062 mV ±78.126 mV Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power on) Resolution 16 bits Sampling Rate All channels: 12 samples/sec Per channel: 1.5 samples/sec Sensor Type J, K, T, E, R, S, B, N LED Interface LED Indicators PWR, RDY, Serial, I/O Status Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 Magnetic Isolation Protection 1.5 kV (built-in) Ethernet Software Features Configuration Options Web Console (HTTP), Windows Utility (ioAdmin) Industrial Protocols CGI commands, Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, SNMPv1 Trap, SNMPv1/v2c/v3 Management BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP MIB Device Settings MIB Time Management SNTP Modbus TCP Functions Supported 1, 2, 3, 4, 5, 6, 15, 16 Mode Server (Slave) Serial Interface Connector Terminal block Serial Standards RS-485 No. of Ports 1

w .moxa.com Baudrate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps Parity None Data Bits 8 Stop Bits 1 Flow Control None Serial Signals RS-485-2w Data+, Data-, GND Serial Software Features Industrial Protocols Modbus RTU Server (Client) Power Parameters Power Connector Screw-fastened Euroblock terminal No. of Power Inputs 1 Input Voltage 12 to 36 VDC Power Consumption ioLogik E2210 Series: 202 mA @ 24 VDC ioLogik E2212 Series: 136 mA @ 24 VDC ioLogik E2214 Series: 170 mA @ 24 VDC ioLogik E2240 Series: 198 mA @ 24 VDC ioLogik E2242 Series: 178 mA @ 24 VDC ioLogik E2260 Series: 95 mA @ 24 VDC ioLogik E2262 Series: 160 mA @ 24 VDC Physical Characteristics Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in) Weight 250 g (0.55 lb) Installation DIN-rail mounting, Wall mounting Wiring I/O cable, 16 to 26 AWG Power cable, 16 to 26 AWG Housing Plastic Environmental Limits Operating Temperature Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Altitude 2000 m Standards and Certifications Freefall IEC 60068-2-32 EMC EN 61000-6-2/-6-4 Safety UL 508 EMI CISPR 32, FCC Part 15B Class A 1. Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

w .moxa.com EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF Shock IEC 60068-2-27 Vibration IEC 60068-2-6 Declaration Green Product RoHS, CRoHS, WEEE MTBF Time ioLogik E2210 Series: 213,673 hrs ioLogik E2212 Series: 217,722 hrs ioLogik E2214 Series: 307,329 hrs ioLogik E2240 Series: 155,941 hrs ioLogik E2242 Series: 204,391 hrs ioLogik E2260 Series: 327,282 hrs ioLogik E2262 Series: 341,063 hrs Standards Telcordia SR332 Warranty Warranty Period ioLogik E2214 Series: 2 years ioLogik E2210/E2212/E2240/E2242/E2260/E2262 Series: 5 years Details See www.moxa.com/warranty Package Contents Device 1 x ioLogik E2200 Series remote I/O Documentation 1 x quick installation guide 1 x warranty card Dimensions 2. Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.

w .moxa.com

Ordering Information

Model Name Input/Output Interface Digital Input Sensor Type Analog Input Range Operating Temp. ioLogik E2210 12 x DI, 8 x DO Wet Contact (NPN), Dry Contact – -10 to 60°C ioLogik E2210-T 12 x DI, 8 x DO Wet Contact (NPN), Dry Contact – -40 to 75°C ioLogik E2212 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP), Dry Contact – -10 to 60°C ioLogik E2212-T 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP), Dry Contact – -40 to 75°C ioLogik E2214 6 x DI, 6 x Relay Wet Contact (NPN or PNP), Dry Contact – -10 to 60°C ioLogik E2214-T 6 x DI, 6 x Relay Wet Contact (NPN or PNP), Dry Contact – -40 to 75°C ioLogik E2240 8 x AI, 2 x AO – V, 0-20 mA, 4-20 mA -10 to 60°C ioLogik E2240-T 8 x AI, 2 x AO – V, 0-20 mA, 4-20 mA -40 to 75°C ioLogik E2242 12 x DIO, 4 x AI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 ±10 V, 0-10 V, 0-20 mA, 4-20 mA -10 to 60°C ioLogik E2242-T 12 x DIO, 4 x AI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 ±10 V, 0-10 V, 0-20 mA, 4-20 mA -40 to 75°C ioLogik E2260 4 x DO, 6 x RTD – – -10 to 60°C ioLogik E2260-T 4 x DO, 6 x RTD – – -40 to 75°C ioLogik E2262 4 x DO, 8 x TC – – -10 to 60°C ioLogik E2262-T 4 x DO, 8 x TC – – -40 to 75°C Accessories (sold separately) Software MX-AOPC UA Server OPC UA Server software for converting fieldbus to the OPC UA standard © Moxa Inc. All rights reserved. Updated Jul 27, 2020. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.