E15C7 ECLIPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR E15C7 CERAMIC 2.5V OS1C 01/07 E15C7 Series OSCILLATOR E15C7 ELECTRICAL SPECIFICATIONS 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.

  • RoHS Compliant (Pb-Free)  LVPECL output oscillators  2.5V supply voltage  Ceramic 6-pad SMD package  Stability to ±25ppm  Tri-State output  Complementary output  Available on tape and reel  Wide range of available frequencies H 2.0 L 7.0 W 5.0 0°C to 70°C, or -40°C to +85°C -55°C to 125°C 2.5V DC ±5% 75mA Maximum ±100ppm, ±50ppm, or ±25ppm Maximum V CC-1.025VDC Minimum VCC-1.085VDC Minimum VCC-1.405VDC Maximum VCC-1.305VDC Maximum 300pSec Typical, 700pSec Maximum 50 ±5(%)

50 Ohms into V

CC-2.0VDC Complementary Output and Tri-State Enables Output Enables Output Disables Output: High Impedance 30µA Maximum 10 mSeconds Maximum 0.4pSec Typical, 1 pSec Maximum -60dBc/Hz at 10Hz Offset -95dBc/Hz at 100Hz Offset -125dBc/Hz at 1kHz Offset -143dBc/Hz at 10kHz Offset -145dBc/Hz at 100kHz Offset -145dBc/Hz at 1MHz Offset -146dBc/Hz at 10MHz Offset Nominal Frequency (MHz) Operating Temperature Range Storage Temperature Range Supply Voltage (V CC) Input Current Frequency Tolerance / Stability Output Voltage Logic High (V OH) Output Voltage Logic Low (V OL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output Tri-State Input Voltage Standby Current Start Up Time RMS Phase Jitter Typical Phase Noise Inclusive of All Conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25°C, Shock, and Vibration 0°C to 85°C -40°C to 0°C 0°C to 85°C -40°C to 0°C 20% to 80% of waveform at 50% of waveform V IH of 70% of VCC Minimum No Connection V IL of 30% of VCC Maximum Without Load FJ = 12kHz to 20MHz Fo=156.250MHz

Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR E15C7 CERAMIC 2.5V OS1C 01/07 MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. E15C7 E 2 F - 155.520M TR PART NUMBERING GUIDE AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT F=Complementary Output and Tri-State DUTY CYCLE 2=50 ±5(%) FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over 0°C to +70°C D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C J=±25ppm Maximum over -40°C to +85°C (*) Pin 1: Tri-State Pin 2: No Connect Pin 3: Case Ground Pin 4: Output Pin 5: Complementary Output Pin 6: Supply Voltage A B C D E F F G H J K L TAPE M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN R S T U V QTY/REEL 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 1,000 REEL *Compliant to EIA 481A Tolerances= +0.1 MARKINING ORIENTATION 5.00 ±0.20 7.00 +0.70/ -0.15 5.08 ±0.20 2.54 ±0.10 1.2 +0.3/ -0.2 2.60 +0.40/-0.60 1.4 ±0.2 2.00 MAX Characteristic Specification Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-883, Method 2007 , Condition A Solderability MIL-STD-883, Method 2002 Temperature Cycling MIL-STD-883, Method 1010 Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 (*) Not available over Nominal Frequency range of 176.83816MHz to 212.500MHz