E11F4 ECLIPTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
3545 CADILLAC AVENUE · COSTA MESA, CA 92626-1401 · (714) 433-1200 · Fax (714) 433-1234
DATE: April 7, 2003 TO: Affected Customers FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following Ecliptek series effective April 7th, 2003: Series Description Recommended Replacement E11F4 5 pin DIP PECL Oscillator, 5V E11F1 E13F4 5 pin DIP PECL Oscillator, 3.3V E13F1 E31F4 5 pin DIP PECL VCXO, 5V E31F1 E32F4 5 pin DIP PECL VCXO, 3.3V E32F1 Because of the circumstances surrounding this termination, there will be no end-of-life policy exercised. The series will be terminated with no purchasing or lifetime buy window available. All of us at Ecliptek Corporation apologize for any inconvenience this may have caused and can assure you we are taking measures to insure this will not happen again in the future. Best Regards, Mark W. Stoner Director of Marketing Ecliptek Corporation
MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR E11F4 14 pin DIP 5.0V OS86 01/03 E11F4 Series
- PECL Output Oscillators 5.0V supply voltage 14 pin DIP package (5 pin) Stability to 20ppm Output Enable/Disable available Complementary Output available H 8.0 L 20.8 W 13.2 OSCILLATOR E11F4 NOTES ELECTRICAL SPECIFICATIONS 19.440MHz to 250.000MHz 0°C to 70°C -40°C to 85°C -55°C to 125°C 5.0V DC ±5% 100mA Maximum 100KH ±100ppm, ±50ppm, ±25ppm, or ±20ppm Maximum V CC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum 50 ±10(%) 50 ±5(%)
50 Ohms into V
CC-2.0VDC No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Enables Output Enables Output Disables Output: Logic Low Disables Complementary Output: Logic High 10 mSeconds Maximum 1 pSec Maximum Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (V CC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (V OH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output Enable/Disable Input Voltage Start Up Time RMS Phase Jitter Available at Frequencies < 212.500MHz Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Aging, Shock, and Vibration 20% to 80% of waveform at 50% of waveform V IL of VCC-1.475VDC Maximum No Connection V IH of VCC-1.165VDC Minimum FJ = 12kHz to 20MHz 800-ECLIPTEK www.ecliptek.com for latest revision 86 Specifications subject to change without notice.
ECLIPTEK CORP . OSCILLATOR E11F4 14 pin DIP 5.0V OS86 01/03 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE E11F4 F 2 C - 155.520M PART NUMBERING GUIDE NOTES Characteristic Specification Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-883, Method 2007 , Condition A Lead Integrity MIL-STD-883, Method 2004 Solderability MIL-STD-883, Method 2002 Temperature Cycling MIL-STD-883, Method 1010 Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot 800-ECLIPTEK www.ecliptek.com for latest revision 87 Specifications subject to change without notice. FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output D=Complementary Output and Enable/Disable FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over 0°C to +70°C D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C DUTY CYCLE Pin 1: Enable/Disable or No Connect Pin 7: Case Ground Pin 8: Output Pin 9: Complementary Output or No Connect Pin 14: Supply Voltage
MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR E13F4 14 pin DIP 3.3V OS85 01/03 E13F4 Series
- LVPECL Output Oscillators 3.3V supply voltage 14 pin DIP package (5 pin) Stability to 20ppm Output Enable/Disable available Complementary Output available H 8.0 L 20.8 W 13.2 OSCILLATOR E13F4 NOTES ELECTRICAL SPECIFICATIONS 800-ECLIPTEK www.ecliptek.com for latest revision 90 Specifications subject to change without notice. 19.440MHz to 250.000MHz 0°C to 70°C -40°C to 85°C -55°C to 125°C 3.3V DC ±5% 75mA Maximum 100KH ±100ppm, ±50ppm, ±25ppm, or ±20ppm Maximum V CC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum 50 ±10(%) 50 ±5(%)
CC-2.0VDC No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Enables Output Enables Output Disables Output: Logic Low Disables Complementary Output: Logic High 10 mSeconds Maximum 1 pSec Maximum Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (V CC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (V OH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output Enable/Disable Input Voltage Start Up Time RMS Phase Jitter Available at Frequencies < 212.500MHz Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Tem- perature Range, Supply Voltage Change, Output Load Change, Aging, Shock, and Vibration 20% to 80% of waveform at 50% of waveform V IL of VCC-1.475VDC Maximum No Connection V IH of VCC-1.165VDC Minimum FJ = 12kHz to 20MHz
ECLIPTEK CORP . OSCILLATOR E13F4 14 pin DIP 3.3V OS85 01/03 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE PART NUMBERING GUIDE NOTES Characteristic Specification Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-883, Method 2007 , Condition A Lead Integrity MIL-STD-883, Method 2004 Solderability MIL-STD-883, Method 2002 Temperature Cycling MIL-STD-883, Method 1010 Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot 800-ECLIPTEK www.ecliptek.com for latest revision 91 Specifications subject to change without notice. E13F4 F 2 C - 155.520M FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output D=Complementary Output and Enable/Disable FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over 0°C to +70°C D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C DUTY CYCLE Pin 1: Enable/Disable or No Connect Pin 7: Case Ground Pin 8: Output Pin 9: Complementary Output or No Connect Pin 14: Supply Voltage
MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR E31F4 14 pin DIP 5.0V OS88 01/03 E31F4 Series
- PECL Output VCXO 5.0V supply voltage 14 pin DIP package (5 pin) Stability to 20ppm Complementary Output available Custom lead length H 8.0 L 20.8 W 13.2 OSCILLATOR E31F4 NOTES ELECTRICAL SPECIFICATIONS 800-ECLIPTEK www.ecliptek.com for latest revision 104 Specifications subject to change without notice. 19.440MHz to 212.500MHz 0°C to 70°C or -40°C to 85°C -55°C to 125°C 5.0V DC ±5% 100mA Maximum 100KH ±50ppm, ±25ppm, or ±20ppm Maximum V CC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum 50 ±10(%) 50 ±5(%)
CC-2.0VDC Complementary Output or No Connect 10 mSeconds Maximum 1 pSec Maximum ±50ppm Minimum 20%, 15%, or 10% Maximum 2.5V DC ±2.0VDC 0.0VDC to VCC 2.5VDC Positive Transfer Characteristic 50kOhms Typical 10kHz Minimum Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (V CC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (V OH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Additional Output Start Up Time RMS Phase Jitter Absolute Pull Range (APR) Linearity Control Voltage (V C): Test Conditions for APR Control Voltage Range (VCR) Center Control Voltage Transfer Function Input Impedance Modulation Bandwidth Inclusive of Operating Temp Range, Supply Voltage, Load, and Aging @25°C over 10 years 20% to 80% of waveform at 50% of waveform FJ = 12kHz to 20MHz Inclusive of Operating Temp Range, Supply Voltage, Load, and Aging @25°C over 10 years at -3dB with Control Voltage of +2.5V DC
ECLIPTEK CORP . OSCILLATOR E31F4 14 pin DIP 5.0V OS88 01/03 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE E31F4 F 3 A 2 C - 155.520M - CL125 PART NUMBERING GUIDE NOTES Characteristic Specification Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum. Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot 800-ECLIPTEK www.ecliptek.com for latest revision 105 Specifications subject to change without notice. AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 153) G=Full Size Gull Wing (See Page 152) FREQUENCY ADDITIONAL OUTPUT A=No Connect C=Complementary Output DUTY CYCLE 1=50 ±10(%) 2=50 ±5(%) FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C H=±50ppm Maximum over -40°C to +85°C APR 3=±50ppm Minimum LINEARITY A=20% B=15% C=10% Pin 1: Voltage Control Pin 7: Case Ground Pin 8: Output Pin 9: Complementary Output or No Connect Pin 14: Supply Voltage
MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP . OSCILLATOR E32F4 14 pin DIP 3.3V OS87 01/03 E32F4 Series
- LVPECL Output VCXO 3.3V supply voltage 14 pin DIP package (5 pin) Stability to 20ppm Complementary Output available Custom lead length H 8.0 L 20.8 W 13.2 OSCILLATOR E32F4 NOTES ELECTRICAL SPECIFICATIONS 800-ECLIPTEK www.ecliptek.com for latest revision 108 Specifications subject to change without notice. 19.440MHz to 212.500MHz 0°C to 70°C or -40°C to 85°C -55°C to 125°C 3.3V DC ±5% 75mA Maximum 100KH ±50ppm, ±25ppm, or ±20ppm Maximum V CC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum 50 ±10(%) 50 ±5(%)
CC-2.0VDC Complementary Output or No Connect 10 mSeconds Maximum 1 pSec Maximum ±50ppm Minimum 20%, 15%, or 10% Maximum 1.65V DC ±1.35VDC 0.0VDC to VCC 1.65VDC Positive Transfer Characteristic 50kOhms Typical 10kHz Minimum Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (V CC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (V OH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Additional Output Start Up Time RMS Phase Jitter Absolute Pull Range (APR) Linearity Control Voltage (V C): Test Conditions for APR Control Voltage Range (VCR) Center Control Voltage Transfer Function Input Impedance Modulation Bandwidth Inclusive of Operating Temp Range, Supply Voltage, Load, and Aging @25°C over 10 years 20% to 80% of waveform at 50% of waveform FJ = 12kHz to 20MHz Inclusive of Operating Temp Range, Supply Voltage, Load, and Aging @25°C over 10 years at -3dB with Control Voltage of +1.65V DC
ECLIPTEK CORP . OSCILLATOR E32F4 14 pin DIP 3.3V OS87 01/03 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE E32F4 F 3 A 2 C - 155.520M - CL125 PART NUMBERING GUIDE NOTES Characteristic Specification Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum. Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot 800-ECLIPTEK www.ecliptek.com for latest revision 109 Specifications subject to change without notice. AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 153) G=Full Size Gull Wing (See Page 152) FREQUENCY ADDITIONAL OUTPUT A=No Connect C=Complementary Output DUTY CYCLE 1=50 ±10(%) 2=50 ±5(%) FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C H=±50ppm Maximum over -40°C to +85°C APR 3=±50ppm Minimum LINEARITY A=20% B=15% C=10% Pin 1: Voltage Control Pin 7: Case Ground Pin 8: Output Pin 9: Complementary Output or No Connect Pin 14: Supply Voltage