DTIPU16C-101

DTIPU16 WALL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTIPU16 Series

15 Watt

AC/DC Desktop Power Supply Rev A Approval not for B Type

FEATURES

• Splash Proof
• Single Output
• 2 Year Warranty
• Energy Star Compliant
• B Type: Class II Insulation
• Optional Output Connectors
• A & C Types: Class I Insulation
• 3 Types of Inlet Connectors Available
• Wide Input Voltage 90~264VAC, 47~63Hz
• -20°C~+70°C Operating Temperature Range SPECIFICATIONS: DTIPU16 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT (Vin) Operating Voltage Range 90 264 VAC Input Frequency 47 63 Hz Input Current (Low Line) Io = Full Load, Vin = 115VAC 0.4 A Input Current (High Line) Io = Full Load, Vin = 230VAC 0.26 A Inrush Current (Low Line) Io = Full Load, 25°C, Cool Start, Vin = 115VAC 12 15 A Inrush Current (High Line) Io = Full Load, 25°C, Cool Start, Vin = 230VAC 26 30 A Safety Ground Leakage Current Io = Full Load, Vin = 240VAC 0.5 0.75 mA Start-Up Time Io = Full Load, Vin = 100VAC 0.3 1 2 s OUTPUT (Vo) Output Voltage Range See Rating Chart Load Regulation Vin = 230VAC 3 10 % Line Regulation Io = Full Load 0.5 1 % Output Power Range Vin = 90 to 264VAC 15 W Output Current Range See Rating Chart *Ripple & Noise (peak to peak) Full Load, Vin = 90VAC 0.5 1 % Transient Response Time Io = Full Load to Half Load, Vin = 100VAC 4 ms Hold-Up Time Io = Full Load, Vin = 110VAC 5 ms PROTECTION Over Voltage Protection Nil % Over Current Protection Nil. Output protected to short circuit conditions % GENERAL Efficiency Io = Full Load, Vin = 230VAC 72 85 % Dielectric Withstanding Voltage For Primary to Secondary Primary to Secondary 4242 VDC Dielectric Withstanding Voltage Primary to Ground (For A & C Types Only) Primary to Ground 2121 VDC Isolation Resistance Test Voltage = 500VDC 50 MΩ No Load Power Consumption No Load, Vin = 240VAC 0 0.4 0.5 W ENVIRONMENTAL Operating Temperature Derate linearly from 100% Load at 40°C to 50% load at 70°C -20 70 °C Storage Temperature -40 85 °C Relative Humidity 5 95 % Temperature Coefficient All Outputs -0.04 +0.04 %/°C MTBF Operating temperature at 25°C, Calculated per MIL-HDBK-217F 100,000 hours PHYSICAL Weight Approximately 165 grams Dimensions (L x W x H) 3.58 x 1.50 x 1.42 inches 91.0 x 38.0 x 36.0 mm Input Inlet IEC-320-C14, IEC-320-C8, IEC-320-C6 Warranty 2 years SAFETY CISPR (EMI Requirements for CISPR-22) Vin = 220VAC B Class FCC (EMI Requirements for FCC Part-15) Vin = 110VAC B Class *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTIPU16 Series AC/DC Desktop Power Supply Rev A MODEL SELECTION CHART Model Number Preset Voltage Output Voltage Range Output Current Total Regulation Maximum Output Power AC Inlet Connector *DTIPU16A-101 5 VDC 3 ~ 5 VDC 2.50A max 7% 12W *DTIPU16A-102 6 VDC 5 ~ 6 VDC 2.50 ~ 2.00A 5% 12W *DTIPU16A-103 8 VDC 6 ~ 8 VDC 2.00 ~ 1.50A 5% 12W *DTIPU16A-104 11 VDC 8 ~ 11 VDC 1.87 ~ 1.36A 5% 15W *DTIPU16A-105 13 VDC 11 ~ 13 VDC 1.36 ~ 1.15A 5% 15W *DTIPU16A-106 16 VDC 13 ~ 16 VDC 1.15 ~ 0.94A 5% 15W *DTIPU16A-107 21 VDC 16 ~ 21 VDC 0.94 ~ 0.72A 5% 15W *DTIPU16A-108 27 VDC 21 ~ 27 VDC 0.72 ~ 0.55A 5% 15W *DTIPU16A-109 33 VDC 27 ~ 33 VDC 0.55 ~ 0.45A 5% 15W DTIPU16A-110 40 VDC 33 ~ 40 VDC 0.45 ~ 0.37A 3% 15W DTIPU16A-111 48 VDC 40 ~ 48 VDC 0.37 ~ 0.31A 3% 15W IEC-320-C14 *DTIPU16B-101 5 VDC 3 ~ 5 VDC 2.50A max 7% 12W *DTIPU16B-102 6 VDC 5 ~ 6 VDC 2.50 ~ 2.00A 5% 12W *DTIPU16B-103 8 VDC 6 ~ 8 VDC 2.00 ~ 1.50A 5% 12W DTIPU16B-104 11 VDC 8 ~ 11 VDC 1.87 ~ 1.36A 5% 15W DTIPU16B-105 13 VDC 11 ~ 13 VDC 1.36 ~ 1.15A 5% 15W DTIPU16B-106 16 VDC 13 ~ 16 VDC 1.15 ~ 0.94A 5% 15W DTIPU16B-107 21 VDC 16 ~ 21 VDC 0.94 ~ 0.72A 5% 15W DTIPU16B-108 27 VDC 21 ~ 27 VDC 0.72 ~ 0.55A 5% 15W DTIPU16B-109 33 VDC 27 ~ 33 VDC 0.55 ~ 0.45A 5% 15W DTIPU16B-110 40 VDC 33 ~ 40 VDC 0.45 ~ 0.37A 3% 15W DTIPU16B-111 48 VDC 40 ~ 48 VDC 0.37 ~ 0.31A 3% 15W IEC-320-C8 *DTIPU16C-101 5 VDC 3 ~ 5 VDC 2.50A max 7% 12W *DTIPU16C-102 6 VDC 5 ~ 6 VDC 2.50 ~ 2.00A 5% 12W *DTIPU16C-103 8 VDC 6 ~ 8 VDC 2.00 ~ 1.50A 5% 12W *DTIPU16C-104 11 VDC 8 ~ 11 VDC 1.87 ~ 1.36A 5% 15W *DTIPU16C-105 13 VDC 11 ~ 13 VDC 1.36 ~ 1.15A 5% 15W *DTIPU16C-106 16 VDC 13 ~ 16 VDC 1.15 ~ 0.94A 5% 15W *DTIPU16C-107 21 VDC 16 ~ 21 VDC 0.94 ~ 0.72A 5% 15W *DTIPU16C-108 27 VDC 21 ~ 27 VDC 0.72 ~ 0.55A 5% 15W *DTIPU16C-109 33 VDC 27 ~ 33 VDC 0.55 ~ 0.45A 5% 15W DTIPU16C-110 40 VDC 33 ~ 40 VDC 0.45 ~ 0.37A 3% 15W DTIPU16C-111 48 VDC 40 ~ 48 VDC 0.37 ~ 0.31A 3% 15W IEC-320-C6 NOTES 1. The DTIPU16 Series is designated as DTIPU16x-y where x represents the type of AC input inlet connector, which can either be A (IEC-320-C14), B (IEC-320-C8), or C (IEC-320-C6); y can be 101, 102, 103, 104, 105, 106, 107, 108, 109, 110 or 111 for output voltage. 2. The output voltage is specified as a range (Ex: 40 ~ 48VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 3. The “ * ” symbol means PSE approval. 4. A & C Types Only: Models with output voltages under 30VDC have been approved by TUV/PSE. 5. Optional output connectors are available. Please call the factory for more details.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTIPU16 Series AC/DC Desktop Power Supply Rev A MECHANICAL DRAWING Unit: inches [mm]