DTC4-6212-85-1005 DURAKOOL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Sub Miniature PCB Signal Relay Specifications are subject to change without notice. E&OE.See website for contact details: www.durakool.com DTC4 24 Feb 26KS

  • Sub miniature - only 14 x 9 x 5mm
  • Up to 1A/24VDC rating
  • DIL Pitch PCB mounting
  • Surface mount & latching options ü RoHS Compliant Contacts Ordering Code Contact arrangement DPDT ( 2 Changeover); 2 Form C Contact material Ag + Au plate (0.2um) on stationary contact D T C 4 - 6 2 1 2 - 8 5 - 1 0 0 5 Max. switching voltage AC/DC 250VAC, 220VDC Min. switching current / voltage 0.01mA / 10mVDC Series Coil code: Rated load (resistive - cos φ=1) AC1 0.5A, 125VAC See tables DC1 1A, 30VDC Contact material 1, 2 & 3 Max. switching power 62.5VA / 30W 62: AgPd + Au plate (0.22um) Initial resistance ≤ 50mΩ, max. at 0.1A / 6VDC Coil Contact arrangement Rated voltage DC 3...24V 12: DPDT (2 C/O) Must release voltage ≥0.1Un Operating range See table 1, 2 & 3 Environmental protection Rated power consumption DC 0.14W / 0.10W (single coil latch) / 8: In cover, sealed IP64 0.20W (twin coil latch) Insulation Mounting & terminations Insulation resistance ≥1000MΩ at 500VDC, 50%RH 5: For PCB Dielectric strength coil to contact 1000Vrms, 1min M: For surface mount contact to contact 1000Vrms, 1min pole to pole 1000Vrms, 1min General Data Operating time typ. ≤ 2ms Release time typ. ≤1 / ≤2 (latching) Electrical life ops. 2 x 105 (1A/30VDC) / 2 x 105 (0.5A/125VAC) Mechanical life ops. 1 x 108 Environmental Ambient temperature through hole -40 to 70°C smt -40 to 85°C Shock resistance functional 50g 11ms Notes: For AC loads this relay is designed for 50-60Hz standard industrial power and was tested according to AC1 category as defined by the IEC 60947-1 standard, covering low-frequency switchgear (typically 50-60 Hz). Operating at higher frequencies, places the component outside its certified utilisation category, invalidating all safety certifications (CE, UL, etc.) and manufacturer performance guarantees. destructive 100g Vibration resistance DA 3mm 10-55Hz Dimensions L x W x H 14 x 9 x 5mm / 14.2 x 9.3 x 5.3 (smt type) Weight approx. ≤ 1.5g E305753

Sub Miniature PCB Signal Relay Specifications are subject to change without notice. E&OE.See website for contact details: www.durakool.com DTC4 24 Feb 26KS Coil Data Table 1 Coil code Nominal voltage (VDC) Coil resistance (Ω) ±10% Power consumption (mW) Must operate voltage max. (VDC) Must release voltage min. (VDC) Max. allowable Voltage (VDC) 1003 3 64.3 140 2.25 0.3 7.5 1005 5 178 140 3.75 0.5 12.5 1009 9 579 140 6.75 0.9 22.5 1012 12 1028 140 9.00 1.2 30.0 1024 24 2880 200 18.00 2.4 48.0 Coil Data - 1 Coil Latching Table 2 Coil code Nominal voltage (VDC) Coil resistance (Ω) ±10% Power consumption (mW) Must set voltage max. (VDC) Must reset voltage min. (VDC) Max. allowable Voltage (VDC) SL03 3 90 100 2.25 2.25 8.7 SL05 5 250 100 3.75 3.75 14.5 SL09 9 810 100 6.75 6.75 26.1 SL12 12 1440 100 9.00 9.00 34.8 SL24 24 3840 150 18.00 18.00 57.6 Coil Data - 2 Coil Latching Table 3 Coil code Nominal voltage (VDC) Coil resistance (Ω) ±10% Power consumption (mW) Must operate voltage max. (VDC) Must release voltage min. (VDC) Max. allowable Voltage (VDC) TL03 3 45/45 200 2.25 2.25 8.7 TL05 5 125/125 200 3.75 3.75 14.5 TL09 9 405/405 200 6.75 6.75 26.1 TL12 12 720/720 200 9.00 9.00 34.8 TL24 24 1920/1920 300 18.00 18.00 57.6 Overall Dimensions Fig. 1 Dimensions in mm / inches. Tolerance: ±0.1 / 0.004 unless indicated Index Mark 2.54 0.1 0.55 7.62 0.3 0.25 0.01 0.5 0.02 0.354 4.75 0.187 0.197 3.5 0.138 Index Mark Stand off 9.3 14.2 0.559 2.542.02 0.08 0.1 0.5 0.02 0.366 5.3 0.209 0.25 0.01 6.2 0.244 7.62 0.3 11.5 0.453 ± 0.02

Sub Miniature PCB Signal Relay Specifications are subject to change without notice. E&OE.See website for contact details: www.durakool.com DTC4 24 Feb 26KS PCB Mounting Dimensions and Wiring Diagrams Fig. 2 Wiring Diagrams (Bottom View) Dimensions in mm / inches. Tolerance: ±0.1/ 0.004 unless indicated