DTA-060A WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTA-060A Series To 60 Watts Single Output AC/DC Desktop Power Supply Rev B

FEATURES

  • Single Output
  • High Reliability
  • Input: 90~264VAC
  • 100% Hi-Pot Tested
  • 100% Burn-In Tested
  • Total Power: 40~60 Watts
  • AC Input: IEC-320-C14 Inlet
  • Safety Approvals, EMC Compliance
  • Dimensions: 5.20 x 2.72 x 1.57 Inches
  • Over Voltage, Over Load, and Short Circuit Protected

DESCRIPTION

The DTA-060A series offers up to 60 Watts of power in a si ngle output universal input AC/DC desktop power supply. Output voltages are available from 9VDC to 24VDC. This series also has an IEC-320-C14 AC inlet connector and has over voltage, over load, and short circuit protection. All units are 100% burn-in and hi-pot tested and have safety approvals and EMC compliance. SPECIFICATIONS: DTA-060A Series All specifications apply @ ±25°C ambient unless otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS PROTECTION GENERAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS PHYSICAL SPECIFICATIONS 132 x 69 x 40 mm SAFETY & EMI Due to advances in technology, specifications subject to change without notice

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTA-060A Series To 60 Watts Single Output AC/DC Desktop Power Supply Rev B MODEL SELECTION GUIDE Model Input Voltage Output Voltage Output Current Output Power Output Regulation Ripple & Noise (1) DTA-040A-01Y090 9 VDC 4.4A 40W 5% 90mVp-p DTA-040A-01Y120 12 VDC 3.3A 40W 5% 120mVp-p DTA-040A-01Y130 13 VDC 3.1A 40W 5% 130mVp-p DTA-040A-01Y138 13.8 VDC 2.9A 40W 3% 140mVp-p DTA-060A-01Y140 14 VDC 4.2A 60W 3% 140mVp-p DTA-060A-01Y150 15 VDC 4A 60W 3% 150mVp-p DTA-060A-01Y160 16 VDC 3.8A 60W 3% 160mVp-p DTA-060A-01Y170 17 VDC 3.5A 60W 3% 170mVp-p DTA-060A-01Y180 18 VDC 3.4A 60W 3% 180mVp-p DTA-060A-01Y190 19 VDC 3.2A 60W 3% 190mVp-p DTA-060A-01Y200 20 VDC 3.0A 60W 3% 200mVp-p DTA-060A-01Y210 21 VDC 2.9A 60W 3% 210mVp-p DTA-060A-01Y220 22 VDC 2.7A 60W 3% 220mVp-p DTA-060A-01Y230 23 VDC 2.6A 60W 3% 230mVp-p DTA-060A-01Y240 90 ~ 264 VAC 24 VDC 2.5A 60W 3% 240mVp-p NOTES 1. Ripple and Noise is measured peak–to–peak with 20MHz bandwidth with a tantalum 10µF in parallel with a 0.1µF ceramic capacitor. 2. AC Inlet: IEC-320-C14 Standard. MECHANICAL DRAWINGS Unit: inches (mm) STANDARD OUTPUT CABLE 1. AWG 1185#18AWG/1C+SHIELDING, UL 80°C 300V VW-1, 1050 mm. 2. AWG 2464#18/20AWG/4C+SHIELDING, UL 80°C 300V VW-1, 1050 mm. 3. Depends on customer’s requirements.