DSS58 PF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

• Industrial standard housing Ø58 mm •1 6 B i t s i n g l e t u r n • G alvanically isolated DeviceNet interface • Recessed hollow shaft

Description

In addition to the CANopen, PROFIBUS and AS- Interface rotary encoders, we have broadened our product line of bus-capable absolute encoders with the DSS58 for DeviceNet. Absolute encoders deliver an absolute step value for each angle setting. All these values are represented by code samples of one or more code disks. The code disks are screened by an infrared LED and the bit obtained sample is detected by means of an optical array. Its signals are electronically amplified and are forwarded on to the interface for processing. The absolute encoder has a maximum basic resolution of 65536 steps per revolution (16 Bits). The integrated CAN bus interface of the absolute encoder supports all DeviceNet functions. The following operating modes can be programmed, and can selectively be turned on or off: • Polled mode •C y c l i c m o d e • Change of state mode The absolute encoder is mounted directly onto the application shaft, without any coupling. Rotation of the absolute encoder is prevented by a torque rest.

Singleturn absolute encoder DSS58 Release date: 2019-04-11 06:57 Date of issue: 2019-04-11 t49158_eng.xml Germany: +49 621 776 1111Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091 Dimensions Electrical connection Terminal Cable M12 x 1 Connector Explanation ⊥ - - Ground connection for power supply (+) Red 2 Power supply (-) Black 3 Power supply CG - 1 CAN ground CL Blue 5 CAN low CH White 4 CAN high CG - - CAN ground CL Blue - CAN low CH White - CAN high Indicating and operating elements max. insertion depth = 30 min. insertion depth = 15 Lay-on edge torque rest 20° R 1.6 ø 63 27.5 L ø 58 12.7 ø 59 2.5 L: Singleturn = 87 Multiturn = 98 LEDs ON T GH-+ G x10Bd x1 LL H 6 5 43 09 1 8 6 5 43 09 1 8 6 5 43 09 1 R StaErr Termination resistor Addressing Supply voltage Bus Out Bus In RS 485 interface Error indicator Status indicator LED green LED green Baud rate

Singleturn absolute encoder DSS58 Release date: 2019-04-11 06:57 Date of issue: 2019-04-11 t49158_eng.xml Germany: +49 621 776 1111Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091 Adjusting the participant address The participant address can be adjusted with the rotary switches. The address can be defined between 1 and 63, and may only be assigned once. Adjusting the termination resistor The terminating resistor RT (121 Ω) can be connected to the circuit by means of the switch: Baud rate adjustment LED-indicators Baud rate [kBit/s] Switch position 125 0 250 1 500 2 125 3 reserved 4 ... 9 LED red LED green Meaning off off No voltage supply off on Encoder ready, boot-up message not transmitted, yet. Possible reasons: - no further participant present - wrong baud rate - encoder in prepared status flashing on Boot-up message transmitt ed, Device configuration possible. on on Normal operation mode, encoder in operational status. /K78/K31/K30 /K78/K31 /K38 /K37 /K32 /K36 /K35 /K34 /K33 /K30/K39 /K31 /K38 /K37 /K32 /K36 /K35 /K34 /K33 /K30/K39 /K31 /K4F/K4E /K52 /K54 /K4F/K4E /K52 /K54 participant X last participant

Singleturn absolute encoder DSS58 Release date: 2019-04-11 06:57 Date of issue: 2019-04-11 t49158_eng.xml Germany: +49 621 776 1111Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091 Programmable CAN operating modes Mode Explanation Polled mode The connected host requests the current actual position value via a telegram. The absolute encoder reads in the current position, calculates all parameters that may have been set and then sends back the actual process value. Cyclic mode The absolute encoder sends the current process value depending on a programmable timer. This can cause the bus load to be reduced since the member on the network only sends a message after a specific amount of time without a prompt from the master. Change of state mode The absolute encoder monitors the current process value and transfers the current value by itself if there is any change in the value. This can cause the bus load to be reduced, since the member on the network only sends a message if there has been a change. Programmable rotary encoder parameters Parameter Explanation Operating parameter The direction of rotation (complement) can be specified by parameter as the operating parameter. This parameter determines the direction of rotation in which the output code will be rising or descending. Resolution per revolution The "Resolution" parameter is used to program the rotary encoder so that a desired number of steps can be implemented in reference to a revolution. Preset value The preset value is the desired position value that must be achieved for a specific physical setting of the axis. The preset value parameter is used to set the actual position value to the desired actual process value. Order code DSS58 – R0BN– 00 Number of bits singleturn 12 4096 (standard) 13 8192 16 65536 Temperature N not expanded Output code B Binary Option 0 no option Exit position R radial Connection type AG removable housing cover with terminal compartment AN removable housing cover with connectors M12x1 Shaft dimension/flange version F1A Recessed hollow shaft Ø10 mm x 30 mm F2A Recessed hollow shaft Ø12 mm x 30 mm F3A Recessed hollow shaft Ø15 mm x 30 mm Housing material N Aluminium, powder coated I Inox W Aluminium, powder coated with shaft seal Principle of operation S Singleturn Shaft version S Recessed hollow shaft Data format D DeviceNet