DSP10 SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Facilitates automatic mounting and miniaturization in end products.
  • Peak reverse voltage : VRM =600V .
  • Average rectified current : IO =1.0A. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Peak Reverse Voltage V RM 600 V Average Rectified Current I O 50Hz sine wave, mounted on an alumina board 1.0 A Load resistor (solder pad size 4mm25 20µmt) Mounted PCB 0.64 A Load resistor (solder pad size 4mm25 20µmt) Mounted PCB 0.80 A Load resistor (solder pad size 4mm25 20µmt) Surge Forward Current I FSM 50Hz sine wave 25 A non-repetitive, 1cycle peak value Junction Temperature Tj 150 °C Storage Temperature Tstg - -55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Conditions min typ max Unit Forward Voltage V F IF=1.0A 1.1 V Reverse Current I R VR =VRM 10 µA Thremal Resistance θi-l Junction-Lead 20 °C/W θi-a Junction-Ambient, mounted on an 108 °C/W alumina board (solder pad size 4mm25 20µmt) Mounted on PCB 186 °C/W (solder pad size 4mm25 35µmt) Mounted on PCB 142 °C/W (solder pad size 16mm25 35µmt) SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN DSP10 Package Dimensions unit : mm 1300 [DSP10]

40700 GI IM

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. Silicon Diffused Junction Type Power Rectifier 1.0 1.8 1.0 1.0 1.8 1.0 1.4 0.5 2.8 Cathode mark 3.9 SANYO : SHP

No.6512-2/2 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2000. Specifications and information herein are subject to change without notice. PS 1.0 10 35 7 2 35 7 100 Number of Cycles at 50Hz, n IFSM -- n Surge Foward Current, IFSM -- A 50Hz 1.2 0.6 0.4 0.2 1.0 0.8 16020 40 60 80 100 120 140 Ambient Temperature, Ta -- °C IO -- Ta Average Rectified Current, IO -- A 0.1 0.6 0.8 1.00.4 1.0 1.81.2 1.4 1.6 Forward V oltage, VF -- V Forward Current, IF -- A IF -- VF IT02088 IT02089 IT02090 Ta=150 Alumina board PCB board 1 PCB board 2 When mounted on an alumina board. Solder pad size 2mm PCB board 1 Solder pad size 4mm PCB board 2 Solder pad size 2mm Sine wave Load resistor