DSF200LV XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Input Voltage Range • See Models & Ratings table Input Transient • ±250 V for 70 μs 2 J, 100 V for 50 ms 0.5 Ω per MIL-STD-1275A-E Input Reverse Voltage • Continuous Protection Fuse Protection • None Output Output Voltage • T racks input voltage & clamps <36 VDC Output Power • See Models & Ratings table Output Module Inhibit • Open collector transistor rated (INH) 70 VDC with 5 mA sink current referenced to -Vin/-Vout. When the output current is: >4 A: DSF100, >7 .77 A : DSF200LV >28 A: DSF500 then the INH pin is pulled logic low. This can be used to inhibit downstream DC-DC converters and reduce the load on the filter. When the output current is lower than above the INH pin is logic high. Overtemperature • Shuts down output by pulling disable pin Protection low when baseplate >100 °C. T ypical hysteresis 5 °C auto recovery Specification Filter & Surge Protection
- Up to 28 A Output Current
- Up to 500 W Output Power
- Active Surge Protection
- MIL-STD 461 and DEF-STAN 59-411
- MIL-STD 1275 and DEF-STAN 61-5
- MIL-STD 810
- 3 Year Warranty DSF/FSO Series xppower.com General Efficiency • See T able Isolation Voltage • 500 VDC Input & Output to Case Series Resistance • 0.07 Ω DSF100, 0.26 Ω DSF200LV , 0.018 Ω DSF500, 0.013 Ω FS0461 Disabled Input Current • 25 mA Disable (DIS) • On=open circuit or up to 40V Off=short circuit or <1V No Load Current • 75 mA Package Style • Photo-etched nickel-silver case & aluminium cooling baseplate MTBF • DSF100: 2496 kHrs, DSF200LV: 2218 kHrs, DSF500: 573 kHrs, FSO461: 8737 kHrs, to MIL-HDBK-217F at 40 °C, GB Environmental Operating Temperature • -40 °C to +100 °C baseplate Storage Temperature • -55 °C to +100 °C Salt Atmosphere • MIL-STD-810G method 509.4 Humidity • MIL-STD-810G 507 .4 Altitude • MIL-STD-810G 500.4 Shock • MIL-STD-810G 516.5 function test for ground equipment 40 g in 3 axes Vibration • MIL-STD-810G method 514.5C-17 . Minimum integrity test for military equipment (1 Hr/axis, 3 axes). Vibration 5-33 Hz, 0.5 mm displacement EMC & Safety Safety Approvals • CE marked LVD Immunity • MIL-STD-1275A-E, MIL-STD-461E/F/G (CS101, CS114, CS115 & CS116) MIL-STD-704A, DEF-STAN 61-5 part 6 issue 5 Contact Sales when DEF-STAN-61-5 part 6 issue 6 is required EMC Performance • DSF100 & DSF200LV: MIL-STD 461E/F CE102 & DEF STAN 59-411 DCE01/DCE02 is achieved with external components. DSF500: Compliance to MIL-STD 461E/F/G CE102 & DEF STAN 59-411 DCE01/DCE02 is achieved when used in conjuction with FS0461. See longform datasheet for more information.
09 March 2021
DSF/FSOModels & Ratings 2.41 (61.2) 0.508 (12.9) Customer mounting holes ø3.2mm - 4 places 0.20 (5.0) 0.43 (10.9) 1.02 (25.9) 1.25 (31.8) 0.82 (20.9) 0.20 (5.1) 2.21 (56.1) 0.63 (15.9) -VIN -VOUT INH DIS +VOUT+VIN 0.75 (19.20) 1.45 (36.8) 0.15(3.9) 0.75 (18.9) 1.06 (26.9) 0.19 (4.9) Ø 0.13 (3.2) in 2 places 1.37 (34.9) 0.19 (4.9) 0.51 (12.9) 0.71 (17.9) 0.90 (22.9) 1.10 (27.9) DIS +VOUT -VIN +VIN INH -VOUT 1.25 (31.9) 1.57 (39.9) 0.75 (19.2) 0.508 (12.9) -VIN -VIN -VOUT -VOUT INH DIS +VOUT +VOUT +VIN +VIN 0.18 (4.7) 0.65 (16.4) 0.84 (21.4) 2.09 (53.2) 0.18 (4.7) Ø 0.13 (3.2) in 4 places 2.09 (53.2) +VOUT +VOUT -VIN -VIN +VIN +VIN -VOUT -VOUT 0.45 (11.4) 1.43 (36.4) 1.63 (41.4) 0.65 (16.4) 1.04 (26.4) 1.24 (31.4) 1.63 (41.4) 1.83 (46.4) 0.19 (4.7) 2.09 (53.2) 0.19 (4.7) 2.09 (53.2) Mounting holes 0.126 (3.2) 4 places 2.28 (57.9) 2.28 (57.9) 0.45 (11.4) 1.63 (41.4) 1.83 (46.4) 0.64 (16.4) 2.28 (57.9) 0.75 (19.2)0.508 (12.9) 2.28 (57.9) 0.75 (19.2)0.508 (12.9) DSF200LV - Surge protection and filterDSF100 - Surge protection and filter DSF500 - Surge protection FSO461 - Filter Notes Notes 1. For input voltages above 18 V , maximum load is 500 W. 2. FSO461 has filter circuitry only. T o be used with DSF500 for conducted immunity compliance. 3. DSF500 has surge protection only. T o meet stated EMC performance it must be used with FSO461. Output Power Input Voltage Output Typical Efficiency Model NumberVoltage Max Current 100 W 10-33 VDC <36 VDC 3.7 A 98% DSF100 30 - 54 W 10-18 VDC <36 VDC 3.0 A 92% DSF200 LV126 - 230 W 18-33 VDC <36 VDC 7 .0 A 93% 280 - 500 W 10-33 VDC <36 VDC 28.0 A(1) 98% DSF500(3) 500 W 0-100 VDC Vin - Iin x 0.013 28.0 A 99% FSO461(2) 1. All dimensions in inches (mm). 2. Weights: DSF100: 0.11 lbs (50 g) DSF200LV: 0.18 lbs (80 g) DSF500: 0.36 lbs (160 g) FSO461: 0.36 lbs (160 g) 3. T olerance ±0.011 (±0.3). If using multiple modules, please consider variations in module tolerances. 4. Pin diameter 0.04 (1.0) 5. Pin Material: Copper - tin alloy Finish: 2.5 μ copper and 2.5 μ Sn (tin)