DSEE050 DSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL sales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com DEEP SEA ELECTRONICS INC

3230 Williams Avenue, Rockford, IL 61101-2668 USA

TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL usasales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457 DSEControl® 055-254/12/20 (3) DSEE050 eView® Engine Display - Configurable Engine Monitoring SPECIFICATIONS DC SUPPLY CONTINUOUS VOLTAGE RATING

8 V to 35 V continuous

(5 V for up to 1 minute) CRANKING DROPOUTS Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. MAXIMUM OPERATING CURRENT 300 mA at 12 V, 150 mA at 24 V MAXIMUM STANDBY CURRENT 80 mA at 12 V, 44 mA at 24 V INPUTS MULTI-FUNCTIONAL INPUTS A to D Configurable as: digital, current, voltage, resistance

0 V to 10 V

0-3 kΩ OUTPUTS DC OUTPUTS A to C

1 A continuous at supply voltage

OPERATING TEMPERATURE RANGE -40 ° C to +85 ° C -40 ° F to +185 ° F HEATED DISPLAY OPERATING RANGE Turns on at -25 ° C / -13 ° F Turns off at -5° C / 23 ° F STORAGE TEMPERATURE RANGE -40 ° C to +85 ° C -40 ° F to +185 ° F DIMENSIONS OVERALL (W x H x D) 112.5 mm x 115 mm x 49 mm PANEL CUTOUT 80 mm / 3.15” Diameter RELATED MATERIALS TITLE PART NO. DSEE050 Operators Manual 057-300 DSEE050 Configuration Suite PC Software Manual 057-299 DSEE050 Installation Instructions 053-242 KEY FEATURES

  • Fully configurable display colours
  • Adjustable display icons
  • Digital / analogue I/O mapping to icons
  • TSC 1 speed control via push buttons or onboard inputs
  • Configurable displayed units
  • SPN ignore list
  • Configurable speed step size & ramp
  • 3.5” 320 x 240 pixel optically bonded TFT display.
  • 4 configurable multi-functional inputs (digital, current, voltage, resistance).
  • 3 outputs for external relays, LEDs and audible buzzer.
  • 80 mm circular panel cutout for simple replacement of traditional gauges.
  • IP67 rating offers increased resistance to water ingress.
  • 120 Ω resistor software switchable.
  • Auto on/off heated display.
  • Industry standard Deutsch 18 pin connector.
  • Monitors engine speed, oil pressure, coolant temperature, fuel level & more.
  • Compatible with Tier 4 Final and Stage V engine parameters.
  • TSC 1 messaging for speed control.
  • DTCs for the display of DM1 and DM2 diagnostic trouble codes.
  • Configurable CAN baud rate (250 kbit/s or 500 kbit/s).
  • Configurable start-up screen and instrumentation pages.
  • Dark and light screen themes.
  • Five backlit soft navigation keys.
  • Customised image display (30 screen support).
  • Low power/power save mode.
  • PC configurable using DSE Configuration Suite Software. KEY BENEFITS
  • High resolution display provides excellent readability.
  • Heated display for continual operation in extreme cold temperatures.
  • Licence-free PC software.
  • Uses DSE Configuration Suite PC Software for simplified configuration
  • User friendly set-up and soft-key navigation for ease of use.
  • Compatible with a wide range of CAN engines.

DSEControl® DSEE050 eView® Engine Display - Configurable Engine Monitoring ENVIRONMENTAL TESTING STANDARDS ELECTRO MAGNETIC COMPATIBILITY BS EN 6100-6-2 Electromagnetic Compatibility (EMC) Noise Immunity BS EN 6100-6-4 Electromagnetic Compatibility (EMC) Emission Standard ISO 11452 Electromagnetic Compatibility - Road Vehicles ISO 7637-3: 2016 Road Vehicles - Electrical disturbances from conduction and coupling Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines ELECTRICAL SAFETY BS EN 61010 Safety Requirements for Electrical Equipment for Measurement, Control & Laboratory Use. BS EN 61010: 2010 Part 1: General Requirements BS EN 61010-2-030: 2010 Part 2-030: Particular Requirements for Testing Measuring Circuits ELECTRICAL TESTS ISO 16750-2: 2012 Road vechicles - Environmental conditions and testing for electrical and electronic equipment. Part 2: Electrical loads

4.6.3 Starting profile

4.6.4 Load dump

Damp heat, cyclic upper temperature 55 ˚C EN 60068-2-78 Damp heat, steady state test temperature 40 ˚C/93 % RH (21 Day Duration) MECHANICAL TESTS EN 60068-2-6 Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-27 Part 2-27: Tests - Test Ea: Shock TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -40 °C (-40 °F) BS EN 60068-2-2 Bb/Be Dry Heat +85 °C (185 °F) CHEMICAL ISO 16750-5 Chemical testing for electrical and electronic equipment - Road Vechicles DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP67/NEMA 6. The DSEE050 is a fully configurable colour engine display and controller designed to meet the demands of modern electronic engines and equipment applications. The DSEE050 supports J1939 electronic engines, including Tier 4F and stage V engine parameters and supports TSC 1 messaging allowing speed control messages to be sent over CAN. The engine display is an extremely powerful and versatile product suited to a wide number of different application environments. The DSEE050 is fully configurable using the DSE Configuration Suite Software, which allows users to create custom configurations and user interface screens. Users can also add company branding to the display’s start-up screen and select from a light and dark background when the module is in use. RELATED PARTS TITLE PART NO. DT16 Connector Complete With Pins 007-850 DT16 Connector Harness 016-176 DT16 Programming Connector Harness 016-177 USB-CAN Programming Interface (PCAN - USB - IPEH - 002022) 016-179 PIN DESCRIPTION

1 GND

2 CAN Screen

3 CAN L IN

4 CAN H IN

5 Input 4

6 Input 1

7 VDC Batt +

8 CAN Screen

9 CAN L Out

10 CAN H Out

11 GND

12 Input 2

13 GND Batt

14 Output 1

15 Output 2

16 Output 3

17 VREF Out

18 Input 3

18 Pin Deutsch Connector

055-254/12/20 (3) ISO 9001 Registered Quality Management 015