DSEBC2415I DSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
24 Volt, 15 Amp Battery Charger
DEEP SEA ELECTRONICS LTD UK Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 EMAIL sales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com DEEP SEA ELECTRONICS INC USA
3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL usasales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457 SPECIFICATIONS AC SUPPLY VOLTAGE RANGE
90 V to 305 V (L to N)
48 Hz to 64 Hz (L to N)
15 A DC at 24 V DC
<1% EFFICIENCY >90% REGULATION LINE <0.5% LOAD TEMPERATURE SENSOR INPUT PT1000 PROTECTIONS Short circuit DC over voltage DC over current Reverse polarity Over temperature AC under & over voltage CHARGE FAILURE RELAY
3 A at 30 V DC volt free relay
3.1” x 8.1” x 5.3” WEIGHT 0.88 kg OPERATING TEMPERATURE RANGE -30 ºC to +70 ºC -22 ºF to +158 ºF STORAGE TEMPERATURE RANGE -30 ºC to +70 ºC -22 ºF to +158 ºF RELATED MATERIALS TITLE PART NO. DSEBC2415i Series Configuration Suite PC Software Manual 057-353 DSE Configuration Suite Installation & Operators Manual 057-151 DSEBC2415i Installation Instructions 053-265 DSEBC2415i Series Operators Manual 057-352 ADVANCED FEATURES
- Intelligent three and four stage charging profiles
- Adjustable current limit
- Option to use as a battery charger, power supply or both
- Automatic or manual boost and storage charge functions to help maintain battery condition
- Digital microprocessor technology
- Temperature compensation for battery charging
- Low output ripple and superb line regulation
- Three LED indicators
- Switched mode design
- Fully customisable battery charging curves
- Battery health check
- Battery voltage sensing
- Deep sleep mode
- PSU only mode
- Automatic voltage detection
- Wide output current range Full Protection
- AC input under / over voltage
- Battery charger output over voltage
- Battery charger output over current
- Battery under voltage alarm
- Automatic battery detection
- Automatic battery charger self test
- Output short circuit and inversion polarity with auto recovery
- Max current mode
- SCADA digital input status information
- Automatic power de-rating at high ambient temperatures.
- Optional battery temperature compensation using PT1000 temperature sensor with over temperature protection Automatic Boost Mode
- Boosts and equalises cell charge, improving battery performance Power Save Mode
- Once the battery is fully charged, the chargers switch to eco-power Communication
- Can be integrated into external systems through MODBUS RTU using RS485
- Fully configurable via DSE Configuration Suite PC Software
- DSE2541 remote display option KEY BENEFITS
- Fully flexible to maximise the life of the battery
- Suitable for a wide range of battery types
- Minimum 86% operating efficiency
- No external intervention for boost mode
- Multiple chargers can be linked together to provide larger current outputs
- Can be permanently connected to a battery and AC supply. No need to disconnect through high load conditions such as cranking or when the engine is running. 055-289/06/22 (2) DSEPower
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF BATTERY CHARGER APPLICATIONS ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment OPERATING TEMPERATURE RANGE BS EN 60068-2-1 Ab/Ae Cold Test -30 ºC BS EN 60068-2-2 Bb/Be Dry Heat +80 ºC * Refer to de-rating curve in the DSE9000 Operator Manual VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn
Db Damp Heat Cyclic 20/55 oC @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 oC @ 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS The DSEBC2415i is an intelligent 24 volt, 15 amp switch-mode battery charger that can be programmed for different charging curves, making the product suitable for multiple battery types. The charger is programmed using the DSE Configuration Suite software, can be chassis or DIN rail mounted and has three integrated LEDs to indicate current charging status and fault conditions. The charger has no moving parts, delivering additional durability and reliability and continues to operate when the engine is running. Multiple chargers can be linked to provide a larger current output should this be required. DSEPower DSEBC2415i OTHER CHARGE OUTPUT COMPATIBLE WITH ALL DSE MODULES TEMPERATURE SENSOR VOLT FREE CHANGE OVER FAULT OUTPUT CONFIGURABLE INPUT USB PORT PC PT1000 ONLY MODBUS 1ph N 1 1 RS485 AC POWER SUPPLY DSEBC2415i 055-289/06/22 (2)